Announcement

Collapse
No announcement yet.

honor 9 flashing error!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • honor 9 flashing error!

    @ mods
    I have a honor9 in honor logo hang mode, im trying to update firmware but getting error always,

    Code:
    DC Phoenix 0.0.0.131
    user:013241C5
    
    
    Standard update
    Not Reboot NOT cheked
    Update Verlist to server on file load checked
    Try Rescue Recovery checked
    Bypass version check NOT checked
    Old slow algo checked
    
    Looking for a device in upgrade mode
    No devices detected in upgrade mode
    Device found: BRB3Y18705017462
    
    Detecting recovery partition
    File size: 4,800,829,976 bytes
    Current version(CURVER): LLD_P_GLOBAL_CUST 9.0.0(C900)
    ERECOVERY_KERNEL partition found
    ERECOVERY_RAMDISK partition found
    ERECOVERY_VENDOR partition found
    
    22-May-20 2:28:16 PM Starting to try Rescue Recovery...
    
    
    Looking for a device in fastboot mode
    Device found: BRB3Y18705017462
    
    
    Getting IMEI...
    Getting build number...
    Getting model ...
    Getting battery state...
    Getting backdoor info...
    Getting lock state info...
    Getting lock boot info...
    
    Build number: :LLD-AL20 9.1.0.136(C675E15R1P4)
    Model: LLD-AL20
    Vendor/Country: hw/in
    Battery state: 3292mv
    OEM lock state info:
    FB LockState: LOCKED
    USER LockState: LOCKED
    OEM get bootinfo:
    locked
    
    Getting base version...
    Base Version: LLD-LGRP2-OVS 9.1.0.136
    Getting cust version...
    Cust Version: LLD-AL20-CUST 9.1.0.15(C675)
    Getting preload version...
    Preload Version: LLD-AL20-PRELOAD 9.1.0.4(C675R1)
    
    Process identifier:24633658
    
    
    Erasing ver .. .
    File size: 4,800,829,976 bytes
    Current version(CURVER): LLD_P_GLOBAL_CUST 9.0.0(C900)
    Writing rescue_recovery_kernel partition
    RESCUE_RECOVERY_KERNEL partition update :FAIL image verification error
    Uptade recovery parttion FAIL
    
    Cannot enter in Recovery mode
    can u pls help me revivie it?
    wbr
  • #2

    Bypass version not checked. And make sure phone is charged.

    Comment

    • #3

      Originally posted by Valdemaras View Post
      Bypass version not checked. And make sure phone is charged.
      I check bypass version and battery charge 3.9V tried to flash most of the firmwares and got error! then i while flashing full board software getting this error,now phone bricked only test point mode!
      need help!

      Code:
      DC Phoenix 0.0.0.131
      user:013241C5
      
      
      Standard update
      Not Reboot NOT cheked
      Update Verlist to server on file load NOT checked
      Try Rescue Recovery NOT checked
      Bypass version check NOT checked
      Old slow algo checked
      
      Looking for a device in force upgrade mode
      Device detected:
      COM5: HUAWEI USB COM 1.0 (COM5)
      
      USB Device REMOVAL
      Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 5&2108ad5d&0&4
      
      
      USB Device INSERTION
      Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 5&2108ad5d&0&4
      
      26/05/2020 14:54:57 Starting to write device in FASTBOOT mode...
      File to update: D:\lld\LLD-Full-Repair-NV-included-Board-1.0.0.41-8.0.0.dgtks
      Device detected:
      COM5: HUAWEI USB COM 1.0 (COM5)
      
      Process identifier:24705705
      
      
      Writing bootloader...
      Step 1...
      Step 2...
      
      Waiting for device REMOVAL/INSERTION...
      
      USB Device REMOVAL
      Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 5&2108ad5d&0&4
      
      
      USB Device INSERTION
      Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
      VidPid: VID_18D1&PID_D00D
      Instance id: 5&2108ad5d&0&4
      
      
      Waiting for fastboot device...
      Device found: 0123456789ABCDEF
      
      
      Looking for a device in fastboot mode
      Device found: 0123456789ABCDEF
      
      
      Getting IMEI...
      Getting build number...
      Getting model ...
      Getting model by product ...
      Getting model by :product ...
      Getting battery state...
      Getting backdoor info...
      Getting lock state info...
      Getting lock boot info...
      
      Model: hi6250
      Battery state: 0
      OEM lock state info:
      FB LockState: UNLOCKED
      USER LockState: LOCKED
      OEM get bootinfo:
      unlocked
      
      
      
      Waiting for OEM erase_storage_all command ...OK
      
      Waiting for device REMOVAL/INSERTION...
      
      USB Device REMOVAL
      Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
      VidPid: VID_18D1&PID_D00D
      Instance id: 5&2108ad5d&0&4
      
      
      USB Device INSERTION
      Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 5&2108ad5d&0&4
      
      
      Device detected:
      COM5: HUAWEI USB COM 1.0 (COM5)
      
      Writing bootloader...
      Step 1...
      Step 2...
      
      Waiting for device REMOVAL/INSERTION...
      
      USB Device REMOVAL
      Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 5&2108ad5d&0&4
      
      
      USB Device INSERTION
      Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
      VidPid: VID_18D1&PID_D00D
      Instance id: 5&2108ad5d&0&4
      
      
      Waiting for fastboot device...
      Device found: 0123456789ABCDEF
      
      
      Looking for a device in fastboot mode
      Device found: 0123456789ABCDEF
      
      
      Getting IMEI...
      Getting build number...
      Getting model ...
      Getting model by product ...
      Getting model by :product ...
      Getting battery state...
      Getting backdoor info...
      Getting lock state info...
      Getting lock boot info...
      
      Model: hi6250
      Battery state: 0
      OEM lock state info:
      FB LockState: UNLOCKED
      USER LockState: LOCKED
      OEM get bootinfo:
      unlocked
      
      
      Writing xloader partition
      XLOADER partition update ...OK
      
      Writing ptable partition
      PTABLE partition update ...OK
      
      Writing fastboot partition
      FASTBOOT partition update :FAIL flash write prim vrl failure
      Getting lock state info...
      Writing fastboot partition
      FASTBOOT partition update :FAIL flash write prim vrl failure
      
      Writing dts partition
      DTS partition update :FAIL flash write prim vrl failure
      
      Writing fw_lpm3 partition
      FW_LPM3 partition update :FAIL flash write prim vrl failure
      
      Writing sensorhub partition
      SENSORHUB partition update :FAIL flash write prim vrl failure
      
      Writing fw_hifi partition
      FW_HIFI partition update :FAIL flash write prim vrl failure
      
      Writing teeos partition
      TEEOS partition update :FAIL flash write prim vrl failure
      
      Writing recovery_vbmeta partition
      RECOVERY_VBMETA partition update :FAIL flash write prim vrl failure
      
      Erasing cache partition
      Partition cache erased
      Writing cache partition
      CACHE partition update ...OK
      
      Writing nvme partition
      NVME partition update ...OK
      
      Writing trustfirmware partition
      TRUSTFIRMWARE partition update :FAIL flash write prim vrl failure
      
      Writing modem_fw partition
      MODEM_FW partition update :FAIL flash write prim vrl failure
      
      Writing modemnvm_update partition
      MODEMNVM_UPDATE partition update ...OK
      
      Writing modem_om partition
      MODEM_OM partition update ...OK
      
      Writing modemnvm_img partition
      MODEMNVM_IMG partition update ...OK
      
      Writing modemnvm_backup partition
      MODEMNVM_BACKUP partition update ...OK
      
      Writing modemnvm_factory partition
      MODEMNVM_FACTORY partition update ...OK
      
      Writing modemnvm_system partition
      MODEMNVM_SYSTEM partition update ...OK
      
      Erasing userdata partition
      Partition userdata erased
      Writing userdata partition
      USERDATA partition update ...OK
      
      Writing system partition
      sending sparse file 464607556 bytes
      Waiting for answer...
      send sparse file OK
      sending sparse file 471773420 bytes
      Waiting for answer...
      send sparse file OK
      sending sparse file 389966172 bytes
      Waiting for answer...
      send sparse file OK
      SYSTEM partition update ...OK
      
      Writing vendor partition
      sending sparse file 423641020 bytes
      Waiting for answer...
      send sparse file OK
      sending sparse file 146912472 bytes
      Waiting for answer...
      send sparse file OK
      VENDOR partition update ...OK
      
      Writing product partition
      PRODUCT partition update ...OK
      
      Writing version partition
      VERSION partition update ...OK
      
      Writing splash2 partition
      SPLASH2 partition update ...OK
      
      Writing frp partition
      FRP partition update ...OK
      
      Writing oeminfo partition
      OEMINFO partition update ...OK
      
      Writing secure_storage partition
      SECURE_STORAGE partition update ...OK
      
      Writing modem_secure partition
      MODEM_SECURE partition update ...OK
      
      Writing kernel partition
      KERNEL partition update :FAIL flash write prim vrl failure
      
      Writing ramdisk partition
      RAMDISK partition update ...OK
      
      Writing recovery_ramdisk partition
      RECOVERY_RAMDISK partition update ...OK
      
      Writing recovery_vendor partition
      RECOVERY_VENDOR partition update ...OK
      
      Writing vbmeta partition
      VBMETA partition update :FAIL flash write prim vrl failure
      
      Writing odm partition
      ODM partition update ...OK
      
      
      Software written
      26/05/2020 15:01:43 Writing device finished - INCOMPLETE

      Comment

      • #4


        "Try Rescue Recovery NOT checked Bypass version check NOT checked"

        Comment

        • #5

          Originally posted by Valdemaras View Post
          "Try Rescue Recovery NOT checked Bypass version check NOT checked"
          Code:
          DC Phoenix 0.0.0.131
          user:013241C5
          
          
          Standard update
          Not Reboot NOT cheked
          Update Verlist to server on file load NOT checked
          Try Rescue Recovery NOT checked
          Bypass version check NOT checked
          Old slow algo checked
          
          Looking for a device in force upgrade mode
          Device detected:
          COM5: HUAWEI USB COM 1.0 (COM5)
          31/05/2020 15:28:14 Starting to write device in FASTBOOT mode...
          File to update: G:\Huawei latest 2019 files and flaahers\Honor 9N(LLD-AL20)FRP unlock Done\LLD-Full-Repair-NV-included-Board-1.0.0.41-8.0.0.dgtks
          Device detected:
          COM5: HUAWEI USB COM 1.0 (COM5)
          
          Process identifier:24834456
          
          
          Writing bootloader...
          Step 1...
          Step 2...
          
          Waiting for device REMOVAL/INSERTION...
          
          USB Device REMOVAL
          Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
          VidPid: VID_12D1&PID_3609
          Instance id: 5&2108ad5d&0&4
          
          
          USB Device INSERTION
          Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
          VidPid: VID_18D1&PID_D00D
          Instance id: 5&2108ad5d&0&4
          
          
          Waiting for fastboot device...
          Device found: 0123456789ABCDEF
          
          
          Looking for a device in fastboot mode
          Device found: 0123456789ABCDEF
          
          
          Getting IMEI...
          Getting build number...
          Getting model ...
          Getting model by product ...
          Getting model by :product ...
          Getting battery state...
          Getting backdoor info...
          Getting lock state info...
          Getting lock boot info...
          
          Model: hi6250
          Battery state: 0
          OEM lock state info:
          FB LockState: UNLOCKED
          USER LockState: LOCKED
          OEM get bootinfo:
          unlocked
          
          
          
          Waiting for OEM erase_storage_all command ...OK
          
          Waiting for device REMOVAL/INSERTION...
          
          USB Device REMOVAL
          Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
          VidPid: VID_18D1&PID_D00D
          Instance id: 5&2108ad5d&0&4
          
          
          USB Device INSERTION
          Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
          VidPid: VID_12D1&PID_3609
          Instance id: 5&2108ad5d&0&4
          
          
          Device detected:
          COM5: HUAWEI USB COM 1.0 (COM5)
          
          Writing bootloader...
          Step 1...
          Step 2...
          
          Waiting for device REMOVAL/INSERTION...
          
          USB Device REMOVAL
          Type: @oem63.inf,%qcomdevice00%;HUAWEI USB COM 1.0
          VidPid: VID_12D1&PID_3609
          Instance id: 5&2108ad5d&0&4
          
          
          USB Device INSERTION
          Type: @oem14.inf,%singlebootloaderinterface%;Android Bootloader Interface
          VidPid: VID_18D1&PID_D00D
          Instance id: 5&2108ad5d&0&4
          
          
          Waiting for fastboot device...
          Device found: 0123456789ABCDEF
          
          
          Looking for a device in fastboot mode
          Device found: 0123456789ABCDEF
          
          
          Getting IMEI...
          Getting build number...
          Getting model ...
          Getting model by product ...
          Getting model by :product ...
          Getting battery state...
          Getting backdoor info...
          Getting lock state info...
          Getting lock boot info...
          
          Model: hi6250
          Battery state: 0
          OEM lock state info:
          FB LockState: UNLOCKED
          USER LockState: LOCKED
          OEM get bootinfo:
          unlocked
          
          
          Writing xloader partition
          XLOADER partition update ...OK
          
          Writing ptable partition
          PTABLE partition update ...OK
          
          Writing fastboot partition
          FASTBOOT partition update :FAIL flash write prim vrl failure
          Getting lock state info...
          Writing fastboot partition
          FASTBOOT partition update :FAIL flash write prim vrl failure
          
          Writing dts partition
          DTS partition update :FAIL flash write prim vrl failure
          
          Writing fw_lpm3 partition
          FW_LPM3 partition update :FAIL flash write prim vrl failure
          
          Writing sensorhub partition
          SENSORHUB partition update :FAIL flash write prim vrl failure
          
          Writing fw_hifi partition
          FW_HIFI partition update :FAIL flash write prim vrl failure
          
          Writing teeos partition
          TEEOS partition update :FAIL flash write prim vrl failure
          
          Writing recovery_vbmeta partition
          RECOVERY_VBMETA partition update :FAIL flash write prim vrl failure
          
          Erasing cache partition
          Partition cache erased
          Writing cache partition
          CACHE partition update ...OK
          
          Writing nvme partition
          NVME partition update ...OK
          
          Writing trustfirmware partition
          TRUSTFIRMWARE partition update :FAIL flash write prim vrl failure
          
          Writing modem_fw partition
          MODEM_FW partition update :FAIL flash write prim vrl failure
          
          Writing modemnvm_update partition
          MODEMNVM_UPDATE partition update ...OK
          
          Writing modem_om partition
          MODEM_OM partition update ...OK
          
          Writing modemnvm_img partition
          MODEMNVM_IMG partition update ...OK
          
          Writing modemnvm_backup partition
          MODEMNVM_BACKUP partition update ...OK
          
          Writing modemnvm_factory partition
          MODEMNVM_FACTORY partition update ...OK
          
          Writing modemnvm_system partition
          MODEMNVM_SYSTEM partition update ...OK
          
          Erasing userdata partition
          Partition userdata erased
          Writing userdata partition
          USERDATA partition update ...OK
          
          Writing system partition
          sending sparse file 464607556 bytes
          Waiting for answer...
          send sparse file OK
          sending sparse file 471773420 bytes
          Waiting for answer...
          send sparse file OK
          sending sparse file 389966172 bytes
          Waiting for answer...
          send sparse file OK
          SYSTEM partition update ...OK
          
          Writing vendor partition
          sending sparse file 423641020 bytes
          Waiting for answer...
          send sparse file OK
          sending sparse file 146912472 bytes
          Waiting for answer...
          send sparse file OK
          VENDOR partition update ...OK
          
          Writing product partition
          PRODUCT partition update ...OK
          
          Writing version partition
          VERSION partition update ...OK
          
          Writing splash2 partition
          SPLASH2 partition update ...OK
          
          Writing frp partition
          FRP partition update ...OK
          
          Writing oeminfo partition
          OEMINFO partition update ...OK
          
          Writing secure_storage partition
          SECURE_STORAGE partition update ...OK
          
          Writing modem_secure partition
          MODEM_SECURE partition update ...OK
          
          Writing kernel partition
          KERNEL partition update :FAIL flash write prim vrl failure
          
          Writing ramdisk partition
          RAMDISK partition update ...OK
          
          Writing recovery_ramdisk partition
          RECOVERY_RAMDISK partition update ...OK
          
          Writing recovery_vendor partition
          RECOVERY_VENDOR partition update ...OK
          
          Writing vbmeta partition
          VBMETA partition update :FAIL flash write prim vrl failure
          
          Writing odm partition
          ODM partition update ...OK
          
          
          Software written
          31/05/2020 15:35:07 Writing device finished - INCOMPLETE
          UPDATE ERROR WITHOUT SELECTION! SAME AGAIN!

          WBR
          Sc@RPi@

          Comment

          • #6


            Try Rescue Recovery NOT checked Bypass version check NOT checked
            Still not checked even after telling to make sure those options must be checked - told this now 3 times

            Comment

            Working...
            X