Announcement

Collapse
No announcement yet.

Huawei e169 Voice Enabled

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Huawei e169 Voice Enabled

    Hi !!!

    I have an Huawei e169 with the right firmware ad voice enabled Mobile Partner. In DC-Unlocker I see that voice feature is enabled and that the modem is unlocked.

    Unfortunately, when trying to make a voice call through the Mobile Partner, I instantly get: Failed.

    In ATtrace_0 I have: ERROR \new090511\Unicomm\src\atcomm\Call.cpp (line 100) DialOut false!

    In trace_0 I have:

    [2011-02-09 22:12:40] ERRO CallUIService CallUIDlg.cpp(line 6466): Get VideoCall interface Failed!
    [2011-02-09 22:12:48] INFO FILEMGR FileManager.cpp(line 1075): The removed reocrd is zero!
    [2011-02-09 22:12:48] ERRO CallService CallServiceImpl.cpp(line 292): CMDialOut Error.


    In Mobile Partner I've set: Use oly GSM.

    Anything I can do to make the voice feature work?

    Thanks
  • #2

    Try to use this mobile partner: http://www.dc-unlocker.com/downloads/get/LihV26NW

    Comment

    • #3

      Originally posted by Vincentas View Post
      Already tried that one. Same problem ....

      Any other suggestion? Would it be possible to disable voice feature and then enable it back? Don't know what else to try ...

      Thanks

      Comment

      • #4

        Originally posted by gasperino View Post
        Already tried that one. Same problem ....

        Any other suggestion? Would it be possible to disable voice feature and then enable it back? Don't know what else to try ...

        Thanks
        Then you can try updating other firmware. Maybe this helps.

        Comment

        • #5

          Originally posted by Vincentas View Post
          Then you can try updating other firmware. Maybe this helps.
          Already installed 2 different firmware, all giving voice ENABLED (so...suppoerted). The key it's an e169 and not an e169G ...

          Comment

          • #6

            Huawei e169 Voice Enabled Calls Fail

            I've tried with:

            AT^DDSETEX=? and I get:

            ^DDSETEX2)
            OK


            The possible values are:
            1- Modem Port
            2- Diag Port
            3- PCUI Port
            4- PCVOICE Port

            Shouldn't be active option 4?

            Comment

            • #7

              Is it possible to test the voice feature using a diferent software? I thought that it could be some problem with Mobile Partner and XP on my PC.

              Comment

              • #8

                How could I disable the voice feature and then try to re-enable it?

                Comment

                • #9

                  I've already reflashed the firmware 5 times with 4 different firmwares but the voice feature remained enabled.

                  Comment

                  • #10

                    Originally posted by gasperino View Post
                    I've already reflashed the firmware 5 times with 4 different firmwares but the voice feature remained enabled.
                    Usually flashing firmware will remove the voice feature, if it's enabled....seem that your modem is little faulty
                    Try this step:
                    - flashing a valid firmware (with voice feature)
                    - wait for unload/load new device driver
                    - run dcunlocker, then autodetect
                    - in the white window of dcunlocker, write the AT command ATZ (reset)
                    - close dc-unlocker
                    - safely remove key from usb
                    - reconnect into USB and wait for unload/load new device
                    - send AT command AT^CVOICE? (?= ask status)

                    if answer: ^CVOICE:0,8000,16,20 mean that voice is enabled
                    ^CVOICE:1,.....(disabled)

                    Comment

                    Working...
                    X