If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Strange now it doesn not even detect the phone anymore
What I did was:
hold those three buttons, the screen hanged with a sandclock, plugged the usb cable, changed the config (Huawei phones / auto detect) ...
:-(
DC - Unlocker 2 Client 1.00.0687
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Hello. If you enter firmware update mode, then it means you pressed the wrong combination of 3 buttons. You press VOL+, VOL- and Power button at the same time. Is it working?
if i press vol + and vol - and power on it goes to firmwareupdate mode, if i remove sd card and press vol + and vol - and power on and connect USB cable it show me blank lcd and on device manager is Huwaie Technologies cant install driver
if i press vol + and vol - and power on it goes to firmwareupdate mode, if i remove sd card and press vol + and vol - and power on and connect USB cable it show me blank lcd and on device manager is Huwaie Technologies cant install driver
i downloaded this driver and follow 100% instruction but driver cant install
This driver is only fort fast boot mode, as I see from your previous post you make phone to update (firmware update mode) and try to install drivers. Thats why driver does not fit you.
HERE is right solution to get phone U8160 readable in DC-unlocker software:
Press power shortly AND after 1-3 second press AND KEEP power, volume UP and volume down wait in this position 10 seconds,
release buttons and connect phone to PC.
Android 1.0 appear in down right corner.
Now you can instal drivers from "PULSE" directory that you allready downloaded.
Have discover it on my own. NOone know how to explain it clarly.
Hello. Please contact us via Live Chat Monday to Friday from 9am to 5pm and we will fix the problem.
Live Chat you can find here: http://www.dc-unlocker.com/contacts
Hy!
Same problem.
Prog frezee while doing, and phone no more simcard accept:-(
Update with file U8160V100R001C02B617.zip not help
DC - Unlocker 2 Client 1.00.0702
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Fastboot version : 0.5
Product : U8150
Model : Huawei U8160/Vodafone 858 Smart
IMEI : 356652043664091
Serial NR. : Z8D7ND1161401144
Firmware : U8160V100R001C02B618_EFS
SIM Lock status : unknown(read failed)
Please help if you can not otherwise be paying the phone.
Unfortunately, I have some problems too unlocking the U8160 (actually the Vodafone 858).
The driver is installed, and once I got the dc-unlocker software to find a Huawei phone. But as it was detected as "U8150" and I wasn't not sure if that is correct, I once again turned the phone off.
Now, whenever I'm pushing the three buttons it gets into "firmware updating" mode and shows an error:
-----
Firmware update
Step 1/2
Unpacking
Update failed
-----
THEN the phone hangs, but is not recognized by windows; the battery must be removed to turn it off.
So, how can I get the phone to hang "correctly"? I am absolutely sure I am pressing the right buttons, as 1) it once worked and 2) the combination vol +, vol - and power on is described as the method for firmware update (seen at modaco).
When removing the sd card and pressing the three buttons, the phone isn't starting at all. It only shows a screen with kind of purple color, neither really frozen, nor alive. ;( (Win 7 doesn't recognize the phone then.)
I tought there were some erraneous files on the sd card, so I formated it. But then again only the firmware update mode (with error) comes up.
Firmware is V17 (German - hence my bad English *g*) but I didn't find any newer firmware.
Could anyone out there be so kind and help me - where to get newer firmware or getting behind the firmware update error mode.
What the ....?! Actually, it is soooo simple.
Referring to my problem with the "firmware update error" while pressing vol +, vol - and power on buttons, I have found the solution:
Just press vol - and power on, then the phone will freeze, connect it to the computer, start dc-unlock, press find phone, buy some credits, press unlock, wait 5-10 seconds. Done.
It seems, sometimes it's just not good to press the vol + button. Only vol - and power on.
What the ....?! Actually, it is soooo simple.
Referring to my problem with the "firmware update error" while pressing vol +, vol - and power on buttons, I have found the solution:
Just press vol - and power on, then the phone will freeze, connect it to the computer, start dc-unlock, press find phone, buy some credits, press unlock, wait 5-10 seconds. Done.
It seems, sometimes it's just not good to press the vol + button. Only vol - and power on.
Great software, thanks!
Yes, you are right. Last time you entered firmware update mode, not fast boot, thats why you were unable to detect.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment