paid? why
you can restore the chinese version normally without paying , by connecting to huawei servers by wifi or by hisuit
-
I want to take part in the testing, my device - Nova 2. Is there any hope for adding this device?Leave a comment:
-
Hi!
Is there anybody with exeperience of using this unlocker on non-pro Mate 10, originally Chinese version AL00?
I bought the phone from Wonda, and they rebranded it to global ROM, so effectively, it is now a ALP-L29.
However, me being in Europe, some software features don't work as they should on the global version, and I want to rebrand it to European version, the ALP-L09.
I am aware that both AL00 and ALP-L29 are dual-sim versions, while L-09 is single-sim. That doesn't matter to me as long as it is 4G on that one sim and as long as I can use whole 6GB RAM and 128 GB of internal memory,
So, does anybody have a similar situation as to mine? I used to do quite of ulocking an flashing on Medatek's and Qualcomm's chipsets, and I really don't have any experience with Huawei. I don't want to brick my phone, it wasn't that cheap
....
Last edited by neverone; 2018-07-02, 11:39 AM.Leave a comment:
-
This tool is not for repairing mobiles. How to repair phones check here https://www.dc-unlocker.com/DC-Phoen...epair-tutorialOriginally posted by shuky View PostLeave a comment:
-
Hi,
Long story short: i tried to rebrand my mate 9 AL00 to L29C636 with HWOTA. It flash the frimeware once but i cant run it again since i got FRP Lock on bootloader screen.
I tried to run your tool with both C432 and C185 files but it falid at the same point.
now the phone goes into the empty homescreen, no applications but i can slide down and rich the setting menu - but i cant get into dev options...
attached my log:
One Click Region Converter by DC-Unlocker
SAFE convert from Asian HUAWEI phone to any other region without root, twrp or bootloader unlock
IMPORTANT: Enable "manufacture mode" on your phone:
• Enter in dial pad code *#*#2846579#*#*;
• Select "Project Menu";
• Select "Background settings";
• Select "USB Port settings";
• Select "Manufacture mode";
• Connect it to PC and install drivers;
Picked update file: "C:\Users\elnns\Desktop\New folder\MHA-L29 C432 B185.cnv"
Reading update file
Firmware info (MHA-C999B000)
No Code Size Date Name
1 HW7x27 256 B 2017.06.08 SHA256RSA
2 HW7x27 249 612 B 2017.06.08 CRC
3 HW7x27 12 B 2017.06.08 CURVER
4 HW7x27 26 B 2017.06.08 VERLIST
5 HW7x27 15 B 2017.06.08 PACKAGE_TYPE
6 HW7x27 200 704 B 2017.06.08 HISIUFS_GPT
7 HW7x27 154 752 B 2017.06.08 XLOADER
8 HW7x27 221 504 B 2017.06.08 FW_LPM3
9 HW7x27 3 481 600 B 2017.06.08 FASTBOOT
10 HW7x27 1 217 216 B 2017.06.08 VECTOR
11 HW7x27 71 681 632 B 2017.06.08 MODEMNVM_UPDATE
12 HW7x27 3 935 424 B 2017.06.08 TEEOS
13 HW7x27 153 088 B 2017.06.08 TRUSTFIRMWARE
14 HW7x27 1 027 840 B 2017.06.08 SENSORHUB
15 HW7x27 2 935 744 B 2017.06.08 FW_HIFI
16 HW7x27 16 646 144 B 2017.06.08 BOOT
17 HW7x27 56 541 184 B 2017.06.08 RECOVERY
18 HW7x27 56 541 184 B 2017.06.08 RECOVERY2
19 HW7x27 4 419 584 B 2017.06.08 DTS
20 HW7x27 6 398 184 B 2017.06.08 CACHE
21 HW7x27 2 905 377 556 B 2017.06.08 SYSTEM
22 HW7x27 5 091 840 B 2017.06.08 ISP_FIRMWARE
23 HW7x27 58 720 256 B 2017.06.08 MODEM_FW
24 HW7x27 4 194 304 B 2017.06.08 HISEE_IMG
25 HW7x27 4 391 132 B 2017.06.08 HISEE_FS
26 HW7x27 694 726 836 B 2017.06.08 VENDOR
27 HW7x27 159 921 080 B 2017.06.08 PRODUCT
28 HW7x27 25 166 020 B 2017.06.08 USERDATA
29 HW7x27 5 971 008 B 2017.06.08 UFSFW
Firmware info (MHA-C999B000)
No Code Size Date Name
1 HW7x27 256 B 2017.06.08 SHA256RSA
2 HW7x27 60 692 B 2017.06.08 CRC
3 HW7x27 12 B 2017.06.08 CURVER
4 HW7x27 26 B 2017.06.08 VERLIST
5 HW7x27 15 B 2017.06.08 PACKAGE_TYPE
6 HW7x27 200 704 B 2017.06.08 HISIUFS_GPT
7 HW7x27 134 135 136 B 2017.06.08 CUST
8 HW7x27 6 309 716 B 2017.06.08 VERSION
9 HW7x27 853 545 848 B 2017.06.08 USERDATA
Checking adb connection...
Looking for device in fastboot mode.
Found fastboot device: N8K5T17503013482 MHA-L29
Extracting firmware partitions
Extracting SHA256RSA partition
Extracting CRC partition
Extracting CURVER partition
Extracting VERLIST partition
Extracting PACKAGE_TYPE partition
Extracting HISIUFS_GPT partition
Extracting XLOADER partition
Extracting FW_LPM3 partition
Extracting FASTBOOT partition
Extracting VECTOR partition
Extracting MODEMNVM_UPDATE partition
Extracting TEEOS partition
Extracting TRUSTFIRMWARE partition
Extracting SENSORHUB partition
Extracting FW_HIFI partition
Extracting BOOT partition
Extracting RECOVERY partition
Extracting RECOVERY2 partition
Extracting DTS partition
Extracting CACHE partition
Extracting SYSTEM partition
Extracting ISP_FIRMWARE partition
Extracting MODEM_FW partition
Extracting HISEE_IMG partition
Extracting HISEE_FS partition
Extracting VENDOR partition
Extracting PRODUCT partition
Extracting USERDATA partition
Extracting UFSFW partition
Extracting finished
Extracting customization partitions
Extracting SHA256RSA partition
Extracting CRC partition
Extracting CURVER partition
Extracting VERLIST partition
Extracting PACKAGE_TYPE partition
Extracting HISIUFS_GPT partition
Extracting CUST partition
Extracting VERSION partition
Extracting USERDATA partition
Extracting finished
Flashing firmware (MHA-C999B000)
Writing XLOADER partition
XLOADER partition UPDATE ... OK
Writing FW_LPM3 partition
FW_LPM3 partition UPDATE ... OK
Writing FASTBOOT partition
FASTBOOT partition UPDATE ... OK
Writing VECTOR partition
VECTOR partition UPDATE ... OK
Writing MODEMNVM_UPDATE partition
MODEMNVM_UPDATE partition UPDATE ... OK
Writing TEEOS partition
TEEOS partition UPDATE ... OK
Writing TRUSTFIRMWARE partition
TRUSTFIRMWARE partition UPDATE ... OK
Writing SENSORHUB partition
SENSORHUB partition UPDATE ... OK
Writing FW_HIFI partition
FW_HIFI partition UPDATE ... OK
Writing BOOT partition
BOOT partition UPDATE ... OK
Writing RECOVERY partition
RECOVERY partition UPDATE ... OK
Writing RECOVERY2 partition
RECOVERY2 partition UPDATE ... OK
Writing DTS partition
DTS partition UPDATE ... OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition
CACHE partition UPDATE ... OK
Writing SYSTEM partition
SYSTEM partition UPDATE ... OK
Writing ISP_FIRMWARE partition
ISP_FIRMWARE partition UPDATE ... OK
Writing MODEM_FW partition
MODEM_FW partition UPDATE ... OK
Writing HISEE_IMG partition
HISEE_IMG partition UPDATE ... OK
Writing HISEE_FS partition
HISEE_FS partition UPDATE ... OK
Erasing USERDATA partition
Partition USERDATA erased
Writing USERDATA partition
USERDATA partition UPDATE ... OK
Rebooting device in fastboot mode
Looking for device in fastboot mode.
Found fastboot device: N8K5T17503013482 MHA-L29
Switching to download mode
Looking for device in download mode.
Found download device at: COM8
Updating firmware
Writting file 1 of 29: SHA256RSA OK
Writting file 2 of 29: CRC OK
Writting file 3 of 29: CURVER OK
Writting file 4 of 29: VERLIST OK
Writting file 5 of 29: PACKAGE_TYPE OK
Writting file 6 of 29: HISIUFS_GPT OK
Writting file 7 of 29: XLOADER OK
Writting file 8 of 29: FW_LPM3 OK
Writting file 9 of 29: FASTBOOT OK
Writting file 10 of 29: VECTOR OK
Writting file 11 of 29: MODEMNVM_UPDATE OK
Writting file 12 of 29: TEEOS OK
Writting file 13 of 29: TRUSTFIRMWARE OK
Writting file 14 of 29: SENSORHUB OK
Writting file 15 of 29: FW_HIFI OK
Writting file 16 of 29: BOOT OK
Writting file 17 of 29: RECOVERY OK
Writting file 18 of 29: RECOVERY2 OK
Writting file 19 of 29: DTS OK
Writting file 20 of 29: CACHE OK
Writting file 21 of 29: SYSTEM OK
Writting file 22 of 29: ISP_FIRMWARE OK
Writting file 23 of 29: MODEM_FW OK
Writting file 24 of 29: HISEE_IMG
Error updating file (9)[ AA 54 49 4D 45 4F 55 54 AA ]Leave a comment:
-
I want to note, apparently it rarely matters which model you chose to rebrand your phone, as long as it's global. My chinese EVA-AL10 has 4gb RAM, 64 GB storage, dual sim. Changing it to EVA-L09 (originally a single SIM 3gb RAM 32gb device), my phone retained all its capabilities and specs, including being dual sim, which I didn't know was possible. I chose L09 because it normally supports LTE bands 1, 3, 5, 7 among others, just like the AL10, but unlike the L19 which doesn't support LTE band 5. But to be honest now I think that might not matter either, I'd probably retain all bands my phone originally supported even if I picked L19 (correct me if I'm wrong there).
I was going to say I'd like to have an option of converting into L29 (which has much closer specs to the AL10), but if the original specs are what always matter, then it's really not necessary.
Still, I wouldn't mind being able to go back to AL10 if possible. That'd make it easier for me to trade my phone in the far future.Leave a comment:
-
Then ignore it and continue writing. Otherwise you may as well load manually phone into fastboot and start flashing from there.Originally posted by Muszek View PostLeave a comment:
-
Do you get this error when you attempt to repeat the process?Originally posted by Muszek View PostLeave a comment:
-
One Click Region Converter by DC-Unlocker
SAFE convert from Asian HUAWEI phone to any other region without root, twrp or bootloader unlock
IMPORTANT: Enable "manufacture mode" on your phone:
• Enter in dial pad code *#*#2846579#*#*;
• Select "Project Menu";
• Select "Background settings";
• Select "USB Port settings";
• Select "Manufacture mode";
• Connect it to PC and install drivers;
Picked update file: "C:\temp\VTR-L29 C432 B171.cnv"
Reading update file
Firmware info (Victoria_Global_C999B000)
No Code Size Date Name
1 HW7x27 256 B 2017.09.24 SHA256RSA
2 HW7x27 296 390 B 2017.09.24 CRC
3 HW7x27 24 B 2017.09.24 CURVER
4 HW7x27 46 B 2017.09.24 VERLIST
5 HW7x27 15 B 2017.09.24 PACKAGE_TYPE
6 HW7x27 200 704 B 2017.09.24 HISIUFS_GPT
7 HW7x27 154 752 B 2017.09.24 XLOADER
8 HW7x27 221 312 B 2017.09.24 FW_LPM3
9 HW7x27 3 688 448 B 2017.09.24 FASTBOOT
10 HW7x27 1 209 792 B 2017.09.24 VECTOR
11 HW7x27 35 618 001 B 2017.09.24 MODEMNVM_UPDATE
12 HW7x27 3 641 664 B 2017.09.24 TEEOS
13 HW7x27 157 376 B 2017.09.24 TRUSTFIRMWARE
14 HW7x27 1 489 408 B 2017.09.24 SENSORHUB
15 HW7x27 5 049 024 B 2017.09.24 FW_HIFI
16 HW7x27 18 513 920 B 2017.09.24 BOOT
17 HW7x27 41 816 064 B 2017.09.24 RECOVERY
18 HW7x27 41 816 064 B 2017.09.24 RECOVERY2
19 HW7x27 8 945 664 B 2017.09.24 DTS
20 HW7x27 6 398 184 B 2017.09.24 CACHE
21 HW7x27 3 753 035 048 B 2017.09.24 SYSTEM
22 HW7x27 5 407 680 B 2017.09.24 ISP_FIRMWARE
23 HW7x27 58 720 256 B 2017.09.24 MODEM_FW
24 HW7x27 523 376 B 2017.09.24 HISEE_IMG
25 HW7x27 4 391 132 B 2017.09.24 HISEE_FS
26 HW7x27 667 755 956 B 2017.09.24 VENDOR
27 HW7x27 165 654 608 B 2017.09.24 PRODUCT
28 HW7x27 25 166 020 B 2017.09.24 USERDATA
29 HW7x27 5 971 008 B 2017.09.24 UFSFW
Firmware info (Victoria_Global_C999B000)
No Code Size Date Name
1 HW7x27 256 B 2017.09.24 SHA256RSA
2 HW7x27 72 564 B 2017.09.24 CRC
3 HW7x27 24 B 2017.09.24 CURVER
4 HW7x27 46 B 2017.09.24 VERLIST
5 HW7x27 15 B 2017.09.24 PACKAGE_TYPE
6 HW7x27 200 704 B 2017.09.24 HISIUFS_GPT
7 HW7x27 148 651 144 B 2017.09.24 CUST
8 HW7x27 5 953 148 B 2017.09.24 VERSION
9 HW7x27 1 033 901 952 B 2017.09.24 USERDATA
Checking adb connection...
Port found: COM5
Gathering device info...
Device found
SerialNo **************
IMEI1 **************
IMEI2 **************
MEID **************
MacWLAN **************
MacBt **************
Board VTR
Brand HUAWEI
Model VTR-L29
Name VTR-L29
FingerprintName HUAWEI-Z103
CpuinfoHigh
Language en
Region US
Port COM5
Preparing device
Setting model to VTR-L29 OK
Setting vendor to hw, eu OK
Setting up oem version FAILED
Error setting up oem version. (2)Leave a comment:
-
Well waiting a little longer, the app returned "fastboot authorization failed" and stopped. I rebooted into recovery to try to find the update dialog tomwald spoke of, but getting update fails there. Hitting "Program phone" at this stage also fails "No devices found".
Shutdown phone, reenter fastboot, hit program phone, now it started flashing.
After download mode, it does look like it hangs in 5%. Then it moved again, on its own. It took a while but apparently finished successfully. Awesome! Great seeing this phone load up the usual Google bloatware in english instead of Huawei's bloatware in chinese! ;-) Nothing against chinese, but I had to previously struggle with enabling basic Google services like displaying photos of contacts on my phone. Not anymore!!
This has been done on the Huawei P9 EVA-AL10.Leave a comment:
-
Trying with a Huawei P9. I had a different experience.Originally posted by tomwald View Post
First, after choosing "update file" and waiting for the counter to get to 100% (5-10 minutes), the counts reverts to 0%, though it isn't finished until it displays the firmware info, which takes another 2-4 minutes. Hard to guess, but it sorted itself out.
Moving on, I clicked on Program phone once, it started but couldn't find the phone through adb, then hit Program phone again, this time I checked some prompts on the phone's screen, it rebooted into a white screen of "Fastboot and rescue mode" or something along those lines, other information about bootloader, then finishing with "PHONE Locked" (all in the same screen). The converter app kept doing its thing up until finishing the "Extracting customization partitions" section (the whole extracting business took maybe 5 minutes). Afer "Extracting finished", instead of moving to flashing firmware, the counter had a bar moving left and right for what seemed to be 15 minutes. Thinking maybe this was my lead to try get the phone to the mode user tomwald found, where he had to hit "Program phone" again to work, I tried all buttons in the phone, then "Program phone", nothing moved. Then I restarted, the phone loaded up normally, working normally, nothing changed (all my apps still installed, only change was that the phone displayed model number L09 instead of AL10 which it was originally.
To be honest I didn't know it was even possible to start this phone with the a firmware different from the model number. Regardless, now I started the whole process over to see what happens.
I also thought maybe to manually install the original L09 firmware now that it's recognized as L09. I don't know.Last edited by RafaelLVX; 2018-06-25, 06:21 AM.Leave a comment:
Leave a comment: