Announcement

Collapse
No announcement yet.

waiting for server responce (up to 28 seconds left)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Valdemaras
    replied
    If device does not boot up after flashing board software alone, then no, there isn't.

    Leave a comment:


  • tlacaelel
    replied
    ok, is there any other way to unbrick the phone, because i tried to use DC PHOENIX to flash the phone but, i don't get it,


    Device found: U2F7N17613005093


    25/06/2018 15:21:47 Starting to write device in FASTBOOT mode...

    Device found: U2F7N17613005093

    IMEI: 864013030436693
    Build number: TRT-L53C69B130
    Product model: TRT-L53
    Extracting partition RPM...
    Preparing file to write...

    Writing RPM partition with file RPM
    RPM partition UPDATE ...FAILED
    Cannot get FBlock info from device
    Activating backdoor: DONE
    Extracting partition RPM...
    Preparing file to write...

    Writing RPM partition with file RPM
    RPM partition UPDATE ...FAILED
    Extracting partition TZ...
    Preparing file to write...

    Writing TZ partition with file TZ
    TZ partition UPDATE ...FAILED
    Extracting partition SBL1...
    Preparing file to write...

    Writing SBL1 partition with file SBL1
    SBL1 partition UPDATE ...FAILED
    Extracting partition APDP...
    Preparing file to write...

    Writing APDP partition with file APDP
    APDP partition UPDATE ...FAILED
    Extracting partition MSADP...
    Preparing file to write...

    Writing MSADP partition with file MSADP
    MSADP partition UPDATE ...FAILED
    Extracting partition MODEM...

    Leave a comment:


  • Valdemaras
    replied
    Originally posted by tlacaelel View Post
    The phone is bricked, because i want remove FRP.
    Hmm. i think you did not undersrtand what FRP erase does, it removes google account from phone - factory reset protection. It does not change frp lock status in fastboot...

    Leave a comment:


  • tlacaelel
    replied
    The phone is bricked, because i want remove FRP.

    Attached Files

    Leave a comment:


  • Valdemaras
    replied
    Also, does it ask you to log in with your gmail account when you boot up the phone?

    Leave a comment:


  • Valdemaras
    replied
    For now try to move folder of HCU into different directory not under C:\Users and then repeat frp erase again.
    Originally posted by tlacaelel View Post
    Yes of cource the fastboot.exe file is inside the HCU software folder. I tried again it, i watched the file a23481c3 7393 e065.key disappears after the fail.
    Does it shows the file size while it exists?

    Leave a comment:


  • tlacaelel
    replied
    i get cut and paste the file, before it disappears 1k
    Attached Files

    Leave a comment:


  • tlacaelel
    replied
    Yes of cource the fastboot.exe file is inside the HCU software folder. I tried again it, i watched the file a23481c3 7393 e065.key disappears after the fail.

    Leave a comment:


  • Valdemaras
    replied
    Originally posted by tlacaelel View Post
    Hello

    i attach the debug log file. But is the same before, the debug logging doesn't tell more information about the fail.
    two more questions:
    1. Is there FastbootExe in directory of your HCU software folder?
    2. 2018-06-25 12:46:23.749 Storing certify data to temp file "C:\Users\tlacaelel\Downloads\HCU_257\a23481c3 7393 e065.key" - how big is this file?
    Last edited by Valdemaras; 2018-06-25, 01:23 PM.

    Leave a comment:


  • tlacaelel
    replied
    Hello

    i attach the debug log file. But is the same before, the debug logging doesn't tell more information about the fail.
    Attached Files

    Leave a comment:


  • Valdemaras
    replied
    Originally posted by tlacaelel View Post
    This is the result now


    2018-06-25 08:27:33.865 Reading Certify data...
    2018-06-25 08:27:34.209 Reading Certify data success!
    2018-06-25 08:27:34.257 Signing Certify data...
    2018-06-25 08:28:02.863 Erase FRP fail!

    Fastboot command fail!





    2018-06-25 08:27:11.011 Start read phone info from fastboot!
    2018-06-25 08:27:12.758 Read phone info done!

    Model: TRT-L53
    IMEI: 864013030436693
    Firmware ver.: TRT-L53C69B130
    SN: U2F7N17613005093


    2018-06-25 08:27:13.008 Phone info data backup saved to file C:\Users\tlacaelel\Downloads\HCU_257\Backup\201806 25_082712_864013030436693.BAK

    user Lock state is lock
    fbLock state is lock
    Image is origin
    Verify mode is enforcing
    Check root info is safe
    Lock state is lock
    Root State: UNROOT
    Battery state: 3394mv

    2018-06-25 08:27:29.763 Erase FRP start
    2018-06-25 08:27:30.109 Connecting to server...
    2018-06-25 08:27:31.232 Connected!
    2018-06-25 08:27:32.776 Reading phone info...
    2018-06-25 08:27:33.437 Read phone info success!
    Model: TRT-L53
    IMEI: 864013030436693
    Firmware ver.: TRT-L53C69B130
    SN: U2F7N17613005093


    2018-06-25 08:27:33.818 Phone info data backup saved to file C:\Users\tlacaelel\Downloads\HCU_257\Backup\201806 25_082733_864013030436693.BAK

    2018-06-25 08:27:33.865 Reading Certify data...
    2018-06-25 08:27:34.209 Reading Certify data success!
    2018-06-25 08:27:34.257 Signing Certify data...
    2018-06-25 08:28:02.863 Erase FRP fail!

    Fastboot command fail!

    Please do this:

    1. Restart HCU software.

    2. Login with your account on software.

    3. Right click on memo area make sure "enable debug logging" has a check mark.

    4. Detect your device. Try to erase FRP, after error do rest of the steps

    5. Right click on memo area and save "debug log file".

    6. Send that file to me, please.

    Leave a comment:


  • tlacaelel
    replied
    Also i tried flash it, but i coun't get it

    Looking for a device in upgrade mode
    No devices detected in upgrade mode

    Looking for a device in fastboot mode

    Device found: U2F7N17613005093


    25/06/2018 08:55:18 Starting to write device in FASTBOOT mode...

    Device found: U2F7N17613005093

    Cannot get IMEI from device
    Product model: specify product name
    Extracting partition RPM...
    Preparing file to write...

    Writing RPM partition with file RPM
    RPM partition UPDATE ...FAILED
    Extracting partition RPM...
    Preparing file to write...

    Leave a comment:


  • tlacaelel
    replied
    This is the result now


    2018-06-25 08:27:33.865 Reading Certify data...
    2018-06-25 08:27:34.209 Reading Certify data success!
    2018-06-25 08:27:34.257 Signing Certify data...
    2018-06-25 08:28:02.863 Erase FRP fail!

    Fastboot command fail!





    2018-06-25 08:27:11.011 Start read phone info from fastboot!
    2018-06-25 08:27:12.758 Read phone info done!

    Model: TRT-L53
    IMEI: 864013030436693
    Firmware ver.: TRT-L53C69B130
    SN: U2F7N17613005093


    2018-06-25 08:27:13.008 Phone info data backup saved to file C:\Users\tlacaelel\Downloads\HCU_257\Backup\201806 25_082712_864013030436693.BAK

    user Lock state is lock
    fbLock state is lock
    Image is origin
    Verify mode is enforcing
    Check root info is safe
    Lock state is lock
    Root State: UNROOT
    Battery state: 3394mv

    2018-06-25 08:27:29.763 Erase FRP start
    2018-06-25 08:27:30.109 Connecting to server...
    2018-06-25 08:27:31.232 Connected!
    2018-06-25 08:27:32.776 Reading phone info...
    2018-06-25 08:27:33.437 Read phone info success!
    Model: TRT-L53
    IMEI: 864013030436693
    Firmware ver.: TRT-L53C69B130
    SN: U2F7N17613005093


    2018-06-25 08:27:33.818 Phone info data backup saved to file C:\Users\tlacaelel\Downloads\HCU_257\Backup\201806 25_082733_864013030436693.BAK

    2018-06-25 08:27:33.865 Reading Certify data...
    2018-06-25 08:27:34.209 Reading Certify data success!
    2018-06-25 08:27:34.257 Signing Certify data...
    2018-06-25 08:28:02.863 Erase FRP fail!

    Fastboot command fail!


    Leave a comment:


  • Valdemaras
    replied
    Originally posted by tlacaelel View Post
    Yes, but now there is a different error. "Read more phone info" and then fastboot fail, fastboot can't read more info
    Then where it is visible in device manager....

    Leave a comment:


  • tlacaelel
    replied
    Yes, but now there is a different error. "Read more phone info" and then fastboot fail, fastboot can't read more info

    Leave a comment:

Working...
X