Error connecting to server !

[mobiserv_iasi]

Hello ,

my dongle vygis 0001DCEE by DC-Unlocker not working


" Error connecting to server ! "



thx ,

[Vincentas]

Do not use jtag when use dc-unlocker. Now have unblocked, but next time will be no unblock if will be blocked for same reason. Please remember it.

[mobiserv_iasi]

thx ,

but I did not use JTAG, maybe from other boxes to happen, the truth is that I used while furious, Multibox, microbox, etc. ......

Thanks again

[Vincentas]

thx ,

but I did not use JTAG, maybe from other boxes to happen, the truth is that I used while furious, Multibox, microbox, etc. ......

Thanks again

Maybe. Maybe any process was running. But my previous message still valid.
Sorry, it is not first time and you will be blocked without possibility to unblock if server will detect it again.

[Aquileslynott]

Same to me

Hi,

I have the same problem....what i have done to be blocked?????


Thank You

[Aquileslynott]

need to unlock

Couls you five me access to unlock one phone i need to.

my serial is 1591049b

[bosshogg]

Same here, are there server problems?

UserID: bosshogg

Trying to flash a dashboard but getting "Error connecting to server"

It worked fine a few hours ago (but hung half way through the flash writing process to ZTE MF112).

When I try the Remind Password link (even though I have the right one) it goes to 505 internal server error page.

Have rebooted, changed from 3G internet to a WiFi provide and all other sites are fine. Tried disabling Semantec Endpoint security and windows firewall all without effect.

Any advice would be appreciated.

[Vincentas]

Couls you five me access to unlock one phone i need to.

my serial is 1591049b

Here is no block and all servers are working.
You should check, if the firewall or other software is not blocking the connection. Check, if you have internet conenction at unlock time. Try to use other connection type or other computer

[Vincentas]

UserID: bosshogg

Trying to flash a dashboard but getting "Error connecting to server"

It worked fine a few hours ago (but hung half way through the flash writing process to ZTE MF112).

When I try the Remind Password link (even though I have the right one) it goes to 505 internal server error page.

Have rebooted, changed from 3G internet to a WiFi provide and all other sites are fine. Tried disabling Semantec Endpoint security and windows firewall all without effect.

Any advice would be appreciated.

Here is no block and all servers are working.
You should check, if the firewall or other software is not blocking the connection. Check, if you have internet conenction at unlock time. Try to use other connection type or other computer

[bosshogg]

Thanks, it started working again

Thanks for response.

It started working again, with only the odd glitch, so may have been tempory overload or bottleneck somewhere in the Internet.

[ksenon7]

[QUOTE=Vincentas;31540]

Hi,

I have the same problem .... what i have done to be blocked?????


Thank You
Please unlock me.
* User: 01323080
just bought.
Sorry for the translation I'm from Belarus

[Gintas]

Hi,

I have the same problem .... what i have done to be blocked?????


Thank You
Please unlock me.
* User: 01323080
just bought.
Sorry for the translation I'm from Belarus

You are blocked because driver "usboebusdrvcl.sys" was detected on your computer. This driver belongs to USB sharing software. Please make sure there are no such software installed, because if DC-Unlocker will detect USB sharing, you will automatically blocked which later can result in a permanent block.
Now you are unblocked and should be able to connect.

[urs_marcel27]

Have same problem like all people in this theread., and yes i use jtag box but i don`t know it is against your rules.
I am vygis dongle activated an my serial it is 0001DB13.
From now on i will try to use dc unlocker on other pc

[aadhavan23]

am also having the same problem today..dont know why.. and i didnt installed any usb sharing software except usb safe to remove..

s/n : 200068

[aadhavan23]

sry wrong serial

s/n : 20068518(last 3 digits were printed behind the hologram.so i peeled that out and copied it here.am dc dongle user)

after removing alienware skin pack now its working..

heya all dont install any skin packs thats the p[roblem..now mine working fien..