Please refund

[catalinmai]

I tried to rescue my P10 but I get :

--------------------------------------------------

20-Dec-18 10:38:40 AM Starting to write device in FASTBOOT mode...
File to update: VTRAL00M00A047_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG._inc_testpoint.dgtks
Device detected:
COM7: HUAWEI USB COM 1.0 (COM7)

Writing bootloader...
Writing VTRAL00M00A047_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG._inc_testpoint_4.dtwork...
Error writing Bootloader
20-Dec-18 10:38:53 AM Writing device finished - INCOMPLETE
------------------------------------------------------
p10.png
I tried more board firmware and the same situation.
Do you have any other ideas?
If not can you refund me?
I used hipay, transcation reference: 5C1B3EE389F73101.
Username: catalinmai


.

[Valdemaras]

What you need to do is to open update OEMINFO tab, select bootloader corresponding your mobile processor, then select oeminfo and update device acccordingly to firmware that you want to flash it with, then can flash full stock rom.

[catalinmai]

What you need to do is to open update OEMINFO tab, select bootloader corresponding your mobile processor, then select oeminfo and update device acccordingly to firmware that you want to flash it with, then can flash full stock rom.

Untitled.png
I tried every variant

[Valdemaras]

You have tried with 960_T0_A7.0_V1 too?

[catalinmai]

You have tried with 960_T0_A7.0_V1 too?

Yes and the other one...still the same

[Valdemaras]

I will try to prepare new loader for your mobile and will let you know when it's done.

[Valdemaras]

Uploaded a new one: Kirin960_T2_A7.0_V4 try with it, add screenshot with error if you get it please.

[catalinmai]

Uploaded a new one: Kirin960_T2_A7.0_V4 try with it, add screenshot with error if you get it please.

3.png2.png
I get an error...but not in every run

[Valdemaras]

What was the last firmware that was running in your mobile before you bricked it please? If you remember.

[Valdemaras]

Also please do this:
1. Restart DC-Phoenix.

2. Press CTRL+L

3. Select loader that i've made for you, select oeminfo that you want and flash

4. After unsuccessful flashing close DC-phoenix

5. Open directory where DC-phoenix software is placed in

6. Look for .dgtkl file there, send it to me, please

[catalinmai]

Was L29C432B381 or B380, i was trying to downgrade to b375 and the phone was rebranded from vtr-l09GBRC555

[catalinmai]

Also please do this:
1. Restart DC-Phoenix.

2. Press CTRL+L

3. Select loader that i've made for you, select oeminfo that you want and flash

4. After unsuccessful flashing close DC-phoenix

5. Open directory where DC-phoenix software is placed in

6. Look for .dgtkl file there, send it to me, please

How to sent it? Because it doesn't let me upload it here

[Valdemaras]

Send private message. It should let to do it there.

[catalinmai]

Send private message. It should let to do it there.

It doesn't let me upload dgtkl files

[catalinmai]

Send private message. It should let to do it there.

I made it a zip file