Huawei u8110

[qwertyq]

program writes: phone not found. All make for instruction: http://www.dc-unlocker.com/huawei_ph...lock_tutorials.

[Vincentas]

This phone unlock is done in normal mode.
If you can not detect you should check the fallowing:
Check, if the drivers are installed
Check, if the phone software is closed
Check, if you use autodetect function in dc-unlocker software
Check, if you use latest dc-unlocker software version.

[qwertyq]

installed drivers

installed drivers:
USB\VID_12D1&PID_1038&MI_01\6&52F507A&0&0001
USBSTOR\DISK&VEN_&PROD_IDEOS&REV_0000\7&329A0923&0
USB\VID_12D1&PID_1038\5&27D64A3C&0&10

[qwertyq]

the phone software is closed- yes
use autodetect function in dc-unlocker software
use latest dc-unlocker software version 1.00.0930

[qwertyq]

http://www.fotohost.by/show/9dd05fb1b05f387075bd3413d3260290

[Vincentas]

installed drivers:
USB\VID_12D1&PID_1038&MI_01\6&52F507A&0&0001
USBSTOR\DISK&VEN_&PROD_IDEOS&REV_0000\7&329A0923&0
USB\VID_12D1&PID_1038\5&27D64A3C&0&10

Do you see phone in device manager under modems and ports sections?

[qwertyq]

foto manager

This?

http://www.fotohost.by/show/e5f300ff16a6b50257472b13bbf93d75

[Gintas]

Sorry, your links does not open here.
Maybe you could upload your screenshots to another file hosting website and give us link? Or upload your screenshots here directly.

[qwertyq]

foto manager

this foto manager

[Gintas]

this foto manager

Are you sure you turned on your phone normally?
You have to turn it on normally, then install drivers, install phone software (PC suite), etc.
You do not need to enter any special modes with this phone.

[qwertyq]

firmware?

PC suite does not see
It can because of an firmware? The original has changed on CLOCKWORKMOD V5.0.2.7

[qwertyq]

+

PC suite does not see
It can because of an firmware? The original has changed on CLOCKWORKMOD V5.0.2.7
That means "turned on your phone normally"?
I did all under the instruction. Has included phone, It was loaded, has connected to USB, has included the program - "Phone not found".
Has once included without SIM - "it is not found sim" - the program has informed.
In phone options something is necessary on/off?

[Gintas]

PC suite does not see
It can because of an firmware? The original has changed on CLOCKWORKMOD V5.0.2.7
That means "turned on your phone normally"?
I did all under the instruction. Has included phone, It was loaded, has connected to USB, has included the program - "Phone not found".
Has once included without SIM - "it is not found sim" - the program has informed.
In phone options something is necessary on/off?

Yes, this can be because of changed firmware.

Turn on your phone normally means you have to turn phone on normally, just like you turn it on when you want to use phone.
What software are you using to detect phone? Is it DC-Unlocker? Where do you see "it is not found SIM" message?

[qwertyq]

qwestion

What to me to do further?
What plan of my actions?

[Vincentas]

What to me to do further?
What plan of my actions?

Try to write original firmware back.