U8650-1 No network after unlock

[Torpedin]

DC - Unlocker 2 Client 1.00.0949

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Fastboot version    : 0.5
Product             : swordfish
Model               : Huawei U8650/U8651
IMEI                : 357099042863234
Serial NR.          : U8M7NB1181804460
Firmware            : U8650V100R001C00B003_EFS
SIM Lock status     : unlocked

===================================================================

Unlocking, please wait ... 

Phone successfully unlocked !

Credits left : 31

Please unplug and restart phone !

Is unlocked but don't have network, no call 112

[Gintas]

DC - Unlocker 2 Client 1.00.0949

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Fastboot version    : 0.5
Product             : swordfish
Model               : Huawei U8650/U8651
IMEI                : 357099042863234
Serial NR.          : U8M7NB1181804460
Firmware            : U8650V100R001C00B003_EFS
SIM Lock status     : unlocked

===================================================================

Unlocking, please wait ... 

Phone successfully unlocked !

Credits left : 31

Please unplug and restart phone !

Is unlocked but don't have network, no call 112

Check if there is good network coverage in your area.
Check if SIM card is working normally.
Check in phones settings, if there are no fixed network selected.
Check in phones settings, if there are no "2G only" or "3G only" selected.

[Torpedin]

Check if there is good network coverage in your area.
Check if SIM card is working normally.
Check in phones settings, if there are no fixed network selected.
Check in phones settings, if there are no "2G only" or "3G only" selected.

I have verified everything and the problem persists.

Remember, the version is "U8650-1"

[Gintas]

I have verified everything and the problem persists.

Remember, the version is "U8650-1"

Well I have same phone (U8650-1) with me, it was unlocked with DC-Unlocker too. Working fine.
Does it work normally with original SIM card?
Sure it was working fine before unlocking?

[Torpedin]

Yes, I'm sure, the mobile was work fine before unlock, the problem is after unlock.

I'm very very sure.

[Gintas]

Yes, I'm sure, the mobile was work fine before unlock, the problem is after unlock.

I'm very very sure.

Well then double-check the settings, try phone with original SIM card too.
DC-Unlocker does not change anything in phone system, except SIM lock status.
It might be caused if you tried to write other firmware or rooted the phone, wrote custom ROM, etc.

[Gintas]

From logs history, I can see that you used "Repair security data and unlock" function. This usually fixes such problems, like no signal after unlock.
Did it help you?