U1270 detect as inq mini..!

[iqballk]

phone: huawei
model: U1270 (from label under batt)
provider: EQ

log;

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone         : 19
Model               : iNQ Mini 3G
IMEI                : 355648032638659
Firmware            : APP-U1270V100R001KWTC216B143

===================================================================

Unlocking, please wait ... 

Preparing Boot Download mode ... OK
Preparing bootloader ... OK
Waiting modem/phone to be ready ... 
Phone not found !

Error code 86


unlock failed !

phone not detect in boot loader aka pink screen mode.. even remove nd plugged usb cable.. but phone came with "welcome only" with non accepted sim card.. (but can access menu with moto test card).

any help..!

[Gintas]

phone: huawei
model: U1270 (from label under batt)
provider: EQ

log;

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone         : 19
Model               : iNQ Mini 3G
IMEI                : 355648032638659
Firmware            : APP-U1270V100R001KWTC216B143

===================================================================

Unlocking, please wait ... 

Preparing Boot Download mode ... OK
Preparing bootloader ... OK
Waiting modem/phone to be ready ... 
Phone not found !

Error code 86


unlock failed !

phone not detect in boot loader aka pink screen mode.. even remove nd plugged usb cable.. but phone came with "welcome only" with non accepted sim card.. (but can access menu with moto test card).

any help..!

What DC-Unlocker version you use?
Restart phone, remove battery for 20 seconds and repeat procedure again.
Try to connect it to other USB port, which is directly to motherboard, without any USB hubs.

[iqballk]

current version of dc unlocker used.. tried with 2 diffrent usb (direct) ports..

[Gintas]

current version of dc unlocker used.. tried with 2 diffrent usb (direct) ports..

Can you try to reinstall phones drivers?
Uninstall all Huawei devices using this software: http://www.dc-unlocker.com/downloads/get/C2wkt6d
Then install only this phones drivers.

Or maybe you can try on other computer?

[iqballk]

same problem with a clean pc..! not respond in second part..

[Gintas]

same problem with a clean pc..! not respond in second part..

Can you try with older DC-Unlocker version? 0949: http://www.dc-unlocker.com/downloads/get/l7J5OhI

[iqballk]

same problem..

DC - Unlocker 2 Client 1.00.0949

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone         : 19
Model               : iNQ Mini 3G
IMEI                : 355648032638659
Firmware            : APP-U1270V100R001KWTC216B143

===================================================================

Unlocking, please wait ... 

Preparing Boot Download mode ... OK
Preparing bootloader ... OK
Waiting modem/phone to be ready ... 
Phone not found !

Error code 86


unlock failed !


===================================================================

phone doesn't detect when it say "please unplug nd plug usb cable again"..

[Gintas]

same problem..

DC - Unlocker 2 Client 1.00.0949

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone         : 19
Model               : iNQ Mini 3G
IMEI                : 355648032638659
Firmware            : APP-U1270V100R001KWTC216B143

===================================================================

Unlocking, please wait ... 

Preparing Boot Download mode ... OK
Preparing bootloader ... OK
Waiting modem/phone to be ready ... 
Phone not found !

Error code 86


unlock failed !


===================================================================

phone doesn't detect when it say "please unplug nd plug usb cable again"..

Do reconnect phone quickly when software asks for it?

[iqballk]

both ways.. within 5 seconds.. after 20~30 sec.. same. when it unplugged.. its removed from device manager.. when it re plugged.. nothing happened..

[Gintas]

both ways.. within 5 seconds.. after 20~30 sec.. same. when it unplugged.. its removed from device manager.. when it re plugged.. nothing happened..

So phone is always detected as INQ chat mini? On few computers?

[iqballk]

yes.. i tried with my pc nd lap.. both detect as inq mini..

[IMG][/IMG]

[Gintas]

yes.. i tried with my pc nd lap.. both detect as inq mini..

[IMG][/IMG]

Maybe there is something wrong with phone itself? Maybe it was attempted to flash/upgrade or it has changed firmware or something else?

[iqballk]

is it possible to force unlock as u1270..!

[Gintas]

is it possible to force unlock as u1270..!

I dont think so. This is the only way to unlock it.