OK the B593u-12 is now de-branded and re-booted. Works out fine, but only with the original SIM.
Can anybody advise on a unlocking tool to unlock this particular unit (B593u-12, that is!), enabling its use with SIMs of other carriers?
Unconfigured Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
Vodafone B2000 alias B593u-12 HELP!!!
Collapse
X
-
Universal FW P073
@bgronli
Hi, yes i have seen your comparison board and it's a very good idea, you can add the P052 FW if you want.
I have upgraded yesterday to P073 FW, and i can use the firewall now ( i have a Linux OS) and i have now sms function too but no bridge mode yet.
I don't noticed other change except the name of the carrier that appears next to signal quality
I suggest to huawei adding the LTE frequency in use nearby carrier name in the next upgraded !
I stay on this newest FW.
Leave a comment:
-
Hi
Did you see my link on a previous posting, to a page that compares all the firmware Versions that I have come across lately, and gives you a table about supported functions in each one.
The "old” one you are using I have not tested. However it is unfortunately not any one firmware that supports all the various functions, so you have to chose the one that gives you most of what you need. In the table, there is also a link to directly download the firmware.
Regards Bjorn
Leave a comment:
-
generic FW "review"
Hi,
First thanks to all members of this post.
After reading, i have bought an used german vodafone B2000 from Amazon.de ( i have no adsl at my home ) and flash it with Generic P052 FW .
(Thanks to feherhollo for shared software)
I have reset the router after flashing to enable the generic "admin" password
It work fine with the french Bouygtel carrier witch use Mimo antennas for LTE.
I set up upon my roof an external mimo antenna witch is autodetect and bost signal from 2/3 to max 5 bars and up download speed to 60/65 Mbps/s !
everythink ok, exept :
- english only (not a problem)
- no sms function
- firewall must stay disabled otherwise no more internet even in low mode !
- no brige mode in wifi (main disadvantage for me)
But a wifi router in repeater mode plug on an Ethernet Lan port ( through CPL ) do the job
- VPN and Qos functions (what it is ?) stay gray in the left menu
- DDNS stay gris in NAT setting
- in Voip "Advanced Voice Settings" there is only china and german regions choice.
( work well with china choice ! )
that's all folks !
Leave a comment:
-
@bgronli:
Thank you for the nice post!
I have finally also discovered that one must recover the factory settings on the modem and moreover switch it off and on afterwards.
At the moment the FW V100R001C26SP054 works fine, and allows to explicitly select the external antennas even only one antenna is connected.
Leave a comment:
-
Can you use any dyndns host, or does have a list to pick?
Even testing LTE and 3G working, doesnt really tell you that as all Bands unlocked.
Some firmwares specialy the branded ones, have locked the Bands that they dont use on that specific country.
Either way, if you find out more and test it, tell us, very cool stuff.
Leave a comment:
-
Ddns
Hi
Yes, the DDNS works fine (I used dyndnd.org, and it did update my host on dyndns). My regret is that I would like both VoIP and DDNS, but that combinations does not exist in any of the firmwares I tested.
It did work on LTE and 3G, so I assume all frequencies are working.
Bjorn
Leave a comment:
-
Nice comparison Board. Thanks, i didnt knew that there were recent firmware for our router.
Never saw a firmware with DDNS inside, have you tested it? Does it have all the frequencys unlocked?
Very cool post !
Iv google and found that Huawei Support has a recent V200R001 version from last december, source code. Maybe someone can start making new firmwares.
Maybe more options on firmware without the restrictions of the ones we have now.
Last edited by grikster; 2014-03-17, 01:08 PM.
Leave a comment:
-
Recover after Firmware upgrade
Hi. I discovered that if you do a factory reset, after a firmware upgrade that did not work, or left you with login not functional, recovered the device, and lets you log in by using the standard admin/admin.
Also please see a comparison and download links to various firmwares that I have tested here:
Bjorn
Leave a comment:
-
admin password
Hi, garwinocampo,
I have the same problem, after flashing the V100R001C26SP054 FW to my B593u-12 I cannot log in with admin/admin.
Modems works fine, but I cannot configure anything. The purpose why I flashed the new FW was the configuration possibility for external antennas which are not accepted by the previous FW.
Any progress on this?
Leave a comment:
-
What is the admin account/password of 3.dk firmware V100R001C26SP054
What is the admin account/password of 3.dk firmware V100R001C26SP054? When I reset the modem admin password is no longer accpeted. My solution was to flash in older version with admin password firmware.
Leave a comment:
-
Hallo,
i have a Vodafone B2000 Router with Telekom Call & Surf.
My old Vodafone Firmware V100R001C35SP061 does work,
also the Telekom Firmware V100R001C748SP104.
Now i have the 3.dk Firmware V100R001C26SP054 on this Router.
My Problem is now, the Router can't connect to the Telekom Network.
This Message:
A problem has occurred in the communication between your router and the network.
Code: 0X0006001B - UNKNOWN_APN
Details: - This ESM cause is used by the network to indicate that the requested service was rejected by the external packet data network because the PDN type could not be recognised.
This error description can also be saved as a text file. That would enable you to send it to the customer supporter via email.
My APN is right or didn't this Firmware not work, with this Router?
Leave a comment:
-
Thanks for your help............appreciated........
Please can you send me the link of huawei b593 router external antenna unlock firmware so that i can use external anntenna to gain more signal strength...............
Carrier : Mobily Saudi Arabia
Thanks in advance
Leave a comment:
-
Originally posted by feherhollo View Postb593 flasher/upgrader application:
http://www.mediafire.com/?bsb9jfs409v2ci4
Use this app and included tuto to debrand or update your device to any firmware.
not work in B593s-22.
Leave a comment:
-
Leave a comment:
Leave a comment: