Huawei HiSilicon Firmware Writer

[mrsher009]

What about ec5377?????

[Valdemaras]

i try downgrade my modem E5573 from SmartFren use Huawei_E5573_Firmware_21.200.09.00.338_Smartfren_I ndonesia.dgtks and get error no signature (loss 4 credit), please inform with firmware can i use to unlock this modem


Found modem : E5573
Model : Huawei E5573 (untested)
IMEI : 866178020XXXXXX
Serial NR. : Y6HBY15509XXXXXX
Firmware : 21.200.11.01.338
Dashboard version : WEBUI_17.100.12.01.338_MRE5
Web UI version : WEBUI_17.100.12.01.338_MRE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

No unlock solution for this model yet.

[priyadi]

i try downgrade my modem E5573 from SmartFren use Huawei_E5573_Firmware_21.200.09.00.338_Smartfren_I ndonesia.dgtks and get error no signature (loss 4 credit), please inform with firmware can i use to unlock this modem


Found modem : E5573
Model : Huawei E5573 (untested)
IMEI : 866178020XXXXXX
Serial NR. : Y6HBY15509XXXXXX
Firmware : 21.200.11.01.338
Dashboard version : WEBUI_17.100.12.01.338_MRE5
Web UI version : WEBUI_17.100.12.01.338_MRE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

[Valdemaras]

no device detected on device manager during switching to download mode, not like B310s
but is has a software called "Cofiguration uploader", when switching to download mode on USB, then connect RJ45 lan cable and manual set to 192.168.1.1, run Configuration uploader, it will ask for "FLASH CODE" then after correct code entered, it will flash configuration file on to modem.

Well then sorry but no solution for this device model then at the moment. Software is suitable in general only for usb modems.

[Tres Marias]

no device detected on device manager during switching to download mode, not like B310s
but is has a software called "Cofiguration uploader", when switching to download mode on USB, then connect RJ45 lan cable and manual set to 192.168.1.1, run Configuration uploader, it will ask for "FLASH CODE" then after correct code entered, it will flash configuration file on to modem.

[Valdemaras]

no, B315s-22 don't go in download mode, thats why it stop here:

Not found ports in download mode
2015-12-07 13:58:45 Writing device finished with ERROR

same with B315s-936, when switching to download mode, it does not detected by PC, even trying to manually do AT^GODLOAD command the modem power OFF and ON again but only power LED light up and PC is not detecting any huawei device

You should check what happens in device manager during flash, maybe download ports missing drivers for your device.

[Tres Marias]

no, B315s-22 don't go in download mode, thats why it stop here:

Not found ports in download mode
2015-12-07 13:58:45 Writing device finished with ERROR

same with B315s-936, when switching to download mode, it does not detected by PC, even trying to manually do AT^GODLOAD command the modem power OFF and ON again but only power LED light up and PC is not detecting any huawei device

[Valdemaras]

Thanks, after test...

--
2015-12-07 13:56:07 Starting to write device...
Validating file...
File to write: C:\Users\******\Downloads\Huawei_B315_22_Firmware_ 21.311.05.01.1185_SIGNVER.dgtks
File version: 21.311.05.01.1185
Looking for attached port...
Attached port found: COM5
Changing device to download mode...

USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1C05
Instance id: 5&5cb4fa2&0&6
Not found ports in download mode
2015-12-07 13:58:45 Writing device finished with ERROR
---

after writing error, powered off and on again. Router boot up with old firmware. Any ideas?

Means not suitable firmware as i told.

[achtung]

If from web interface update failed it will be same result on HiSilicon flasher most likely. Here is the converted file https://files.dc-unlocker.com/share....C4858FC76D2E5B

Thanks, after test...

--
2015-12-07 13:56:07 Starting to write device...
Validating file...
File to write: C:\Users\******\Downloads\Huawei_B315_22_Firmware_ 21.311.05.01.1185_SIGNVER.dgtks
File version: 21.311.05.01.1185
Looking for attached port...
Attached port found: COM5
Changing device to download mode...

USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1C05
Instance id: 5&5cb4fa2&0&6
Not found ports in download mode
2015-12-07 13:58:45 Writing device finished with ERROR
---

after writing error, powered off and on again. Router boot up with old firmware. Any ideas?

[Valdemaras]

The router does not have the SIM lock, works with any SIM card.It was supplied by the operator Polkomtel (PLUS). The only problem is, can not be loaded any other software for this model (B315-s22) from web interface (upload failed).

If from web interface update failed it will be same result on HiSilicon flasher most likely. Here is the converted file https://files.dc-unlocker.com/share....C4858FC76D2E5B

[achtung]

But is your router unlocked from network? Because flashing to another operator or unbranded firmware won't help without unlocking it first.

The router does not have the SIM lock, works with any SIM card.It was supplied by the operator Polkomtel (PLUS). The only problem is, can not be loaded any other software for this model (B315-s22) from web interface (upload failed).

[Valdemaras]

Hi,

Please, prepare the dgtks image for the Huawei B315s-22 based on file
"Huawei B315s-22_UPDATE_21.311.05.01.1185.bin". I want to remove the existing branded software (21.311.03.00.69). Thanks!

Huawei_B315s-22_UPDATE_21.311.05.01.1185
http://download-c.huawei.com/downloa...88&siteCode=pl

The router is successfully communicating with Huawei HiSilicon Firmware Writer

---
Getting information from the device...
Getting information from the device...OK

Model: B315s-22
Application port: COM30
Diagnostic port: --
IMEI: 86616**********
Firmware Version: 21.311.03.00.69
Build Date: Aug 20 2015, 16:16:10
DL Ver:2.0
DL Info:
swver:21.311.03.00.69
isover:00.00.00.000.00
webuiver:WEBUI_17.100.09.00.03_CPE
product name:B315s-22
dload type:0
Authority Id:866169022000745,0
Authority Ver:2
---

--
best regards
achtung

But is your router unlocked from network? Because flashing to another operator or unbranded firmware won't help without unlocking it first.

[achtung]

Please, request firmware files and models here on this thread.

Hi,

Please, prepare the dgtks image for the Huawei B315s-22 based on file
"Huawei B315s-22_UPDATE_21.311.05.01.1185.bin". I want to remove the existing branded software (21.311.03.00.69). Thanks!

Huawei_B315s-22_UPDATE_21.311.05.01.1185
http://download-c.huawei.com/downloa...88&siteCode=pl

The router is successfully communicating with Huawei HiSilicon Firmware Writer

---
Getting information from the device...
Getting information from the device...OK

Model: B315s-22
Application port: COM30
Diagnostic port: --
IMEI: 86616**********
Firmware Version: 21.311.03.00.69
Build Date: Aug 20 2015, 16:16:10
DL Ver:2.0
DL Info:
swver:21.311.03.00.69
isover:00.00.00.000.00
webuiver:WEBUI_17.100.09.00.03_CPE
product name:B315s-22
dload type:0
Authority Id:866169022000745,0
Authority Ver:2
---

--
best regards
achtung

[Vincentas]

Hello

I was able to fix the modem !!!

Here's what I did :

1. I loaded the new software original file Firmware_Huawei_E3272s-153_22.470.07.00.00
2. Now install Hilink modem drivers into PC.
3. Then run the firmware update of Huawei E303 Hilink modem, it will give you error.(for instal service drv Hilink)
4. Now run the WebUI_E3272s update WebUI_E3272s-153 13.100.04.04.1202
It will successfully repair my Huawei E3272 dead modem.

after repair:

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Interface : 192.168.1.1
Found modem : E3272
Model : Huawei E3272
IMEI : 864217024830858
Serial NR. : J5HBY14630007340
Firmware : 22.470.07.00.00
Hardware ver. : CH1E3272SM
Web UI version : 13.100.04.04.1202
SIM Lock status : unlocked
Wrong codes entered : 10 (unlock attempts left : 0)

Perhaps this information will help someone

Regards

M_ALEX

Thank you for good news and information.

[M_ALEX]

Hello

I was able to fix the modem !!!

Here's what I did :

1. I loaded the new software original file Firmware_Huawei_E3272s-153_22.470.07.00.00
2. Now install Hilink modem drivers into PC.
3. Then run the firmware update of Huawei E303 Hilink modem, it will give you error.(for instal service drv Hilink)
4. Now run the WebUI_E3272s update WebUI_E3272s-153 13.100.04.04.1202
It will successfully repair my Huawei E3272 dead modem.

after repair:

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Interface : 192.168.1.1
Found modem : E3272
Model : Huawei E3272
IMEI : 864217024830858
Serial NR. : J5HBY14630007340
Firmware : 22.470.07.00.00
Hardware ver. : CH1E3272SM
Web UI version : 13.100.04.04.1202
SIM Lock status : unlocked
Wrong codes entered : 10 (unlock attempts left : 0)

Perhaps this information will help someone

Regards

M_ALEX