HUAWEI B310S-927 still locked after using latest version

[Azizski]

Valdemaras hello sir

i have unlocked my device and upgraded modem software successfully you can take your credit back : )

[Valdemaras]

Valdemaras hello sir

i have unlocked my device and upgraded modem software successfully you can take your credit back : )

Great news then. You had to flash it somehow or it just worked out like it had to?

[wajeeh25]

Hello answer to his problem (fix the welding) I apologize I will write the answer in Arabic

المشكلة عنده كانت باللحام تأكد من اللحام مضبوط
ولاتجعل السلك يلامس البورد الخضراء

[Valdemaras]

Hello answer to his problem (fix the welding) I apologize I will write the answer in Arabic

المشكلة عنده كانت باللحام تأكد من اللحام مضبوط
ولاتجعل السلك يلامس البورد الخضراء

Did you perform flashing?

[wajeeh25]

Did you perform flashing?

I had the same problem, and I have shown in the program flash (the device has been Unlocked)

But it discovered that the device did not work

I discovered that the problem of welding, and prepared the process flashing again was completed

[Valdemaras]

I had the same problem, and I have shown in the program flash (the device has been Unlocked)

But it discovered that the device did not work

I discovered that the problem of welding, and prepared the process flashing again was completed

Ok so after repeating soldering/welding of the wires it worked out just fine as i understood. Thank you for sharing this valuable information.

[hakim2016]

Hi every body,
i have the same problem,when i went to flash the B310s-927
Unfortunately of soldering/welding don't work with me
this is the history of my problem
i have 7 pieces of b310s-927 which show just the led power on and can't connected with rj45
I bought credit and try to flash 2 pieces, but i have the error (i upload the pictures)
after that i see that Mr Azizski have succes to unlock and flash ,so i unlock my box 100/100 but flash still give error
please please help me and thank you

[hakim2016]

this is the last picture

[Valdemaras]

Hi every body,
i have the same problem,when i went to flash the B310s-927
Unfortunately of soldering/welding don't work with me
this is the history of my problem
i have 7 pieces of b310s-927 which show just the led power on and can't connected with rj45
I bought credit and try to flash 2 pieces, but i have the error (i upload the pictures)
after that i see that Mr Azizski have succes to unlock and flash ,so i unlock my box 100/100 but flash still give error
please please help me and thank you

Monitor device manager during flash, seems your ports missing drivers while device switching into download mode.

[hakim2016]

when insert usb and before flash Hisilicon give this info
port28

[Valdemaras]

when insert usb and before flash Hisilicon give this info
port28

Yes, but i said during flashing not before. See if download mode ports appear.

[hakim2016]

when box try to enter download mode all port com disappear

[Valdemaras]

when box try to enter download mode all port com disappear

But anything else appear elsewhere maybe.

[hakim2016]

but look at this picture
software try to start flash , that's meen port is correct and box is in download mode!!
after ,he show error
this is my first time to flash modems, i don't know what happens during flash operation

[Valdemaras]

but look at this picture
software try to start flash , that's meen port is correct and box is in download mode!!
after ,he show error
this is my first time to flash modems, i don't know what happens during flash operation

Since now device was found in download mode means ports are fine now. Now do like so: detect router on DC-unlocker client, close dc-unlocker unlock client, then launch flasher software, detect router on it, select firmware and flash.