HUAWEI B310S-927 still locked after using latest version

[Karim1630]

need this frim b310s-927 swver:21.311.05.00.1269

[Valdemaras]

Sorry we do not have it.

[Dineshcooray]

Can i unlock my huawei b310s-925 modem with this software? i have tried soldering wires and its not detected with my pc (i have tried many wires, usbs and pc with ) but same error is comming all the time. is there any way to downgrade firmware or unlock with Lan port ?? please help me with this ?

Device name: B310s-925
IMEI: 866855020523593
IMSI : 413025705288625
My number: Unknown
Hardware version: WL1B310CM01
Software version: 21.311.05.01.297
Web UI version: 17.100.09.00.03
LAN MAC address: 24F:6A:2A:BC:45
WAN IP Address: Unknown
WAN IPv6 Address: Unknown

[Valdemaras]

Can i unlock my huawei b310s-925 modem with this software? i have tried soldering wires and its not detected with my pc (i have tried many wires, usbs and pc with ) but same error is comming all the time. is there any way to downgrade firmware or unlock with Lan port ?? please help me with this ?

Device name: B310s-925
IMEI: 866855020523593
IMSI : 413025705288625
My number: Unknown
Hardware version: WL1B310CM01
Software version: 21.311.05.01.297
Web UI version: 17.100.09.00.03
LAN MAC address: 24F:6A:2A:BC:45
WAN IP Address: Unknown
WAN IPv6 Address: Unknown

If not detected by pc after soldering then can not unlock it.

[Dineshcooray]

If not detected by pc after soldering then can not unlock it.

its not detecting bcos of Firmware upgraded or something Else ???

[Valdemaras]

its not detecting bcos of Firmware upgraded or something Else ???

Might be related to hardware, might be related to soldering. There is no way for us to check it without having device in our hands therefore we won't be able to asisst with this issue.

[Dineshcooray]

Might be related to hardware, might be related to soldering. There is no way for us to check it without having device in our hands therefore we won't be able to asisst with this issue.

Ok thank you so much for your kind respond to my issue ..

[hafiz4saqib]

Might be related to hardware, might be related to soldering. There is no way for us to check it without having device in our hands therefore we won't be able to assist with this issue.

OK! BOSS!
I am back again with this issue!!

now I am failed again with 4th device with the same issue same like as sound of "connecting & disconnecting" after solder wires with the board.
And I sacrifices 10 usb cables but result as usual .......

Note:-
Its happened only with firmware "21.316.01.00.1304"
But I successfully unlock only and only 1 device with firmware of "21.300.01.00.1304".
This update install automatically via OTA.

If you want device, I can send to you anywhere for information for all of us.
What is the exact problem ???

Still I can't find out good and permanent solution for below devices.
Huawei B660
Huawei EM930 - B593
Huawei B310S-927
Huawei E5577-321

[Valdemaras]

OK! BOSS!
I am back again with this issue!!

now I am failed again with 4th device with the same issue same like as sound of "connecting & disconnecting" after solder wires with the board.
And I sacrifices 10 usb cables but result as usual .......

Note:-
Its happened only with firmware "21.316.01.00.1304"
But I successfully unlock only and only 1 device with firmware of "21.300.01.00.1304".
This update install automatically via OTA.

If you want device, I can send to you anywhere for information for all of us.
What is the exact problem ???

Still I can't find out good and permanent solution for below devices.
Huawei B660
Huawei EM930 - B593
Huawei B310S-927
Huawei E5577-321

We cant help about it unless error happens on our software, if device is having hardware incompatibility then no way out for it.

[hafiz4saqib]

We cant help about it unless error happens on our software, if device is having hardware incompatibility then no way out for it.

That`s why I ask from you about this matter.
If its not connecting after "OTA UPDATE" then what is the other way to connect it with computer.
Because without connection "DC-UNLOCKER" wont unlock it.

[Valdemaras]

That`s why I ask from you about this matter.
If its not connecting after "OTA UPDATE" then what is the other way to connect it with computer.
Because without connection "DC-UNLOCKER" wont unlock it.

We do not have solutions for it, if it's not connecting not possible to do anything. can try downgrading if you know how, maybe will do something if you say that it becomes undetectable after OTA update.

[hafiz4saqib]

We do not have solutions for it, if it's not connecting not possible to do anything. can try downgrading if you know how, maybe will do something if you say that it becomes undetectable after OTA update.

OK!!
Lets see what will happened if I got "Downgrade Firmware".

[azherahmed200]

its same problems with me some devices read some not read same model B310s-927 stc router
ok how to you downgrade without connecting your PC please explain me i want also unlock stc router he purchase in stc office

[hafiz4saqib]

We do not have solutions for it, if it's not connecting not possible to do anything. can try downgrading if you know how, maybe will do something if you say that it becomes undetectable after OTA update.

OK!!!! BOSS!!!
Give me hand if possible......
I have a old update firmware router in my hand.
Could you tell me that is there any way to make backup firmware of this device ????
I am thinking that if I anyone bring this router here, 1st I downgrade it with old firmware then I unlock it.

[ibibo]

i want to unlock my glo model E8231s but i can do it pls can u help me out

[hafiz4saqib]

We do not have solutions for it, if it's not connecting not possible to do anything. can try downgrading if you know how, maybe will do something if you say that it becomes undetectable after OTA update.

I don`t want to leave you alone .....
It`s same like as old story ......
Now its not going next step after unlock, because original firmware can`t detect sim.
Check below screen shot and help me here ....

[Valdemaras]

OK!!!! BOSS!!!
Give me hand if possible......
I have a old update firmware router in my hand.
Could you tell me that is there any way to make backup firmware of this device ????
I am thinking that if I anyone bring this router here, 1st I downgrade it with old firmware then I unlock it.

Not possible to make backup with our tools, we do not know about others.