If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Unconfigured Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
Free HUAWEI voice functions activation (beta) ONLY here
the link of dashboard here if for mobile partner but not ugrade of dashboard.
where is the dashboard please ?
it is in directory of mobile partner ?
because in diretory i have setup.exe and data.bin.
Thanks in advance.
http://panatar.com/mobile_partner_voice_ussd.zip - its dashboard reflash. Well do you run it? It will reflash your modem dashboard. After that you need to enable autorun on your disks in Windows. Remove your modem from usb. Uninstall your current Mobile Partner comletely. Insert modem - new Mobile Partner will be installed.
Run dc-unlocker and detect modem. After detection copy-paste command AT^U2DIAG=276 to dc-unlocker window(below information it shows) and press Enter. Modem replies - Ok. Reinsert modem. Check.
http://panatar.com/mobile_partner_voice_ussd.zip - its dashboard reflash. Well do you run it? It will reflash your modem dashboard. After that you need to enable autorun on your disks in Windows. Remove your modem from usb. Uninstall your current Mobile Partner comletely. Insert modem - new Mobile Partner will be installed.
i have do the actions below:
updating dashboard => is ok ( i have removed and inserted again the key)
i don't see cdrom for launch mobile partner, i have type the command in dc-unlocker AT^U2DIAG=276 => now i see cdrom and sd card memory => is ok
i have installed mobile partner voice from my key E160 => is ok
i have upgraded firmware E160Update_11.608.08.81.00.B409, i have enter a password firmware generated from dc-unlocker, => is not ok
i have a message box below
the wireless terminal inserted is not E160, update wizard can't work on.
where is a problem, why the update say me that is not E160 ?
i have tested with tree other firmware and i have a same message
updating dashboard => is ok ( i have removed and inserted again the key)
i don't see cdrom for launch mobile partner, i have type the command in dc-unlocker AT^U2DIAG=276 => now i see cdrom and sd card memory => is ok
i have installed mobile partner voice from my key E160 => is ok
i have upgraded firmware E160Update_11.608.08.81.00.B409, i have enter a password firmware generated from dc-unlocker, => is not ok
i have a message box below
the wireless terminal inserted is not E160, update wizard can't work on.
where is a problem, why the update say me that is not E160 ?
i have tested with tree other firmware and i have a same message
Does the E220 support the voice function?
also how do i find the password for an already unlocked E160 so i can upgrade firmware and dashboard?
How does the ussd work? how do i use it?
Cheers
Comodore
Detect modem with dc-unlocker and post its output here.
i have reset factory default, then the modem is not detected and in dc-unlocker i have card not found, then i have installed driver and dc-unlocked detect the card
DC - Unlocker 2 Client 1.00.0413 beta
Detecting card :
selection :
manufacturer - Huawei datacards
model - Auto detect
Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 353762038782940
Firmware : 11.604.21.05.314
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)
i have reset factory default, then the modem is not detected and in dc-unlocker i have card not found, then i have installed driver and dc-unlocked detect the card
DC - Unlocker 2 Client 1.00.0413 beta
Detecting card :
selection :
manufacturer - Huawei datacards
model - Auto detect
Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 353762038782940
Firmware : 11.604.21.05.314
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)
thanks in advance.
Ok - you don't need to update firmware - just activate voice and you'll be fine. Send AT^U2DIAG=276 after that.
Bug was found in the dashboard that causes uninstallation request every time the modem was plugged into usb port. New version of dashboard uploaded - please redownload from http://panatar.com/mobile_partner_voice_ussd.zip, reflash, reinstall and check.
Arunas try to enable voice and send AT^CVOICE? to modem. it returns 0 - which is correct - its PC Voice Mode. Now send AT^U2DIAG=255 command and reinsert modem. Send AT^CVOICE? and it will return 1 which means Earphone Mode. Not good - after AT^U2DIAG=255 it restores factory defaults from nvram.
I tried this on an unlocked (by DC-unlocker, thanks guys ) E1550 and got
AT^CVOICE?
^RSSI:18
^CVOICE:0,8000,16,20
OK
Same result after AT^U2DIAG=276:
Found modem : E1550
Model : Huawei E1550
IMEI :
Firmware : 11.608.10.00.00
Dashboard version : UTPS11.300.05.08.56_MAC11.300.08.13.56
Serial NR. :
SIM Lock status : unlocked
Voice feature : enabled
AT^CVOICE?
^CVOICE:0,8000,16,20
OK
Does this look OK? If not, is there a way to redirect audio to PC Voice mode?
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
) E1550 and got
Comment