e5180 Huawei Cube (Mobily KSA)

[robertblanco]

try flashing the device just using the flashing exe

[robertblanco]

or try using the reset pin hole (located near the sim card slot) in a 2 try - before flashing

[Steward]

There are 2 bin file in the sw folder? I choose the usbloader.bin, 30-40 minutes and the progress bar finished, but nothing signs me what is the next, finished, or something.

[robertblanco]

normally it takes just some seconds. and of course - just if the boot short method worked - no lights on and just one modem entry

you are not doing it like described. try reading carefully

don‘t know either - if it will work with such high comport numbers

try doing it on a fresh win installation
haven‘t even tried it on xp like yours

[Steward]

Ok, I already changed the pc, now the comports 10-11-12. If I choose the usbloader bin, it takes 10 seconds , and the progress bar ends, but after nothing. If I push "load" again then the progress bar starts again, and it takes 30-40. The question is, the total flashing process is only 10 second? What is about the larger bin file in the folder?

[robertblanco]

this is not the real „flashing“ ...

with the balong usb downloader you are just preparing the real flashing procedere afterwards.

as i told you before ... several times ....

try reading carefully what i said

use the firmware.exe to flash the firmware
not any bin files

once again as a hint ...

check device manager comport entrys first

no lights on & just 1 entry after boot short
-> use balong usb downloader with usbloader e5180s

afterwards it switches to 2 entrys & lights on

now start flashing with firmware.exe

[Steward]

OK, I understand , but what kind of firmware.exe do you speak about? No exe file !

[robertblanco]

seems hopeless with you ...

[robertblanco]

it is included in the file link Huawei_E5180s-517_Firmware_21.270.25.00.00_general.rar you got via pm.
look at drawer justservice

[Steward]

What kind of EXE file ? No EXE file!!! I really do not understand you! Sorry.

[robertblanco]

e5180s-22 firmware exe.png

get yourself some goggles ...

[Steward]

No exe file is in ! Please send me again the pack. Thx

[robertblanco]

are you nuts ... it‘s a link ... get the file yourself

and some brain

[Steward]

Ok. You are kidding me.
This is the link https://mega.nz/#F!0Bl1UQAJ!FIbmNKrYUFPD82Or_BMPGg
Where is the exe file in?
Never mind, I buy a new router for my client.
Thank you your help as yet.
S.

[robertblanco]

blind stupid

2 different links ... via pm ... as i told ya ... try reading carefully

wrong link ... no file

[robertblanco]

e5180s-22 file links #2.png

try to get a reading lesson ....

[lawolf]

e5180s-22 file links #2.png

try to get a reading lesson ....

hi boss ,

i want also ,thanks

[lawolf]

appreciate if can share to me usbsafee5180s.bin

[robertblanco]

please read the thread completely from the beginning.

rest in pm for ya

[lawolf]

thanks friend , you save may day