Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Huawei Mate 8 NTX-L29C636 - Please Help!!

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Huawei Mate 8 NTX-L29C636 - Please Help!!

    Hi,

    I Bricked my phone trying to downgrade with an Stock ROM. Now I'm trying to unlock bootloder to install TWRP and reinstall all the phone. I bought 15 credits to use cd-unlocker buy I couldn't unlock it permanent. I tried in two different computers with different drives but with the same result. I never get the Unlock button enable even when I had the 15 credits (I don't know where they gone).
    When unlocked I can see the device on fastboot command but I could see it on ADB. On the phone I just have access to Fastboot and the eRecovery that do nothing.




    Check account status

    User : pvitruvian
    Credits left : 0

    Activated features:

    Software debugger

    2017.03.01 09:33:04.781 Logging enabled !

    ================================================== =================

    ================================================== =================

    DC - Unlocker 2 Client 1.00.1361

    Detecting phone :

    selection :
    manufacturer - Huawei phones
    model - Auto detect (recommended)

    Found Phone : HUAWEI NXT-L29
    Model : Huawei phone in fastboot mode
    IMEI : 868407024935718
    Serial NR. : QHC0216313003347
    Firmware : NXT-L29C636B321

    IMEI:868407024945873
    FB LockState: UNLOCKED
    USER LockState: LOCKED
    unlocked
    Battery state: 2834mv

    ================================================== =================

    Factory reset protection Erase start

    unknown error (398)

    ================================================== =================

    DC - Unlocker 2 Client 1.00.1357

    Detecting phone :

    selection :
    manufacturer - Huawei phones
    model - Auto detect (recommended)

    Found Phone : HUAWEI NXT-L29
    Model : Huawei phone in fastboot mode
    IMEI : 868407024935718
    Serial NR. : QHC0216313003347
    Firmware : NXT-L29C636B321

    IMEI:868407024945873
    FB LockState: LOCKED
    USER LockState: LOCKED
    locked
    Battery state: 3019mv

    ================================================== =================

    Factory reset protection Erase start

    Insufficient credits !

    ================================================== =================

    Check account status

    User : pvitruvian
    Credits left : 0

    Activated features:

    Software debugger

    Unlock Auto detect (recommended) (868407024935718) cost 0 cr

    ================================================== =================

    Factory reset protection Erase start

    Insufficient credits !

    ================================================== =================

    Log successfully saved in "C:\Users\pcarpovich\Trash\MATE8\20170301_0909 05_l og.cdf"


    Thanks for your help.
    You do not have permission to view this gallery.
    This gallery has 1 photos.
    Last edited by pvitruvian; 2017-03-01, 01:44 PM.
    Tags: None
  • #2
    If you bricked your phone you need to repair ir https://www.dc-unlocker.com/DC-Phoen...epair-tutorial method 1, if it does not help then method 2. FRP unlock wont do any good as it only removes google account sign in from boot up screen lock status in fastboot wont change as explained in our FRP unlock guide. Your credits added back.
    >>Free Octohide VPN for Android, find it on Google Play Here<<

    Comment

    • #3
      Thank you Valdemaras!

      Ok, I run the Step 1 of the method 1, everything seems to be ok except the phone doesn't boot up completely (See attachmente) and I couldn't put the phone in upgrade mode, I tried with volume keys, volume keys + Power key. Just once dc-phoenix recognize the phone but said was in use by other applicacion (No SD inserted and HiSuite was not running). After that every time I press refresh button I get the message User Credits: 0.

      For method 2 I don't know the firmware I need to use for step 1.

      Current version: NextL09C999EMUI50
      Extracting partitions
      Cannot create extract directory: C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\tmp\201 70301_140957_UPDATE\
      Extract files to directory: C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\
      Extracting partition: XLOADER OK
      Extracting partition: FW_LPM3 OK
      Extracting partition: FASTBOOT OK
      Extracting partition: MODEMNVM_UPDATE OK
      Extracting partition: TEEOS OK
      Extracting partition: TRUSTFIRMWARE OK
      Extracting partition: SENSORHUB OK
      Extracting partition: FW_HIFI OK
      Extracting partition: BOOT OK
      Extracting partition: RECOVERY OK
      Extracting partition: RECOVERY2 OK
      Extracting partition: DTS OK
      Extracting partition: MODEM OK
      Extracting partition: MODEM_DSP OK
      Extracting partition: 3RDMODEM OK
      Extracting partition: SYSTEM OK
      Extracting partition: MODEM_DTB OK

      Device found: QHC0216313003347

      IMEI: 868407024935718
      Build number: :NXT-L29C636B321
      Product model: HUAWEI NXT-L29

      Writing XLOADER partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\XLOADER .img
      XLOADER partition UPDATE ...FAILED
      Cannot get FBlock info from device
      Activating backdoor: DONE

      Writing XLOADER partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\XLOADER .img
      XLOADER partition UPDATE ...OK

      Writing FW_LPM3 partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\FW_LPM3 .img
      FW_LPM3 partition UPDATE ...OK

      Writing FASTBOOT partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\FASTBOO T.img
      FASTBOOT partition UPDATE ...OK

      Writing MODEMNVM_UPDATE partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\MODEMNV M_UPDATE.img
      MODEMNVM_UPDATE partition UPDATE ...OK

      Writing TEEOS partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\TEEOS.i mg
      TEEOS partition UPDATE ...OK

      Writing TRUSTFIRMWARE partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\TRUSTFI RMWARE.img
      TRUSTFIRMWARE partition UPDATE ...OK

      Writing SENSORHUB partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\SENSORH UB.img
      SENSORHUB partition UPDATE ...OK

      Writing FW_HIFI partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\FW_HIFI .img
      FW_HIFI partition UPDATE ...OK

      Writing BOOT partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\BOOT.im g
      BOOT partition UPDATE ...OK

      Writing RECOVERY partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\RECOVER Y.img
      RECOVERY partition UPDATE ...OK

      Writing RECOVERY2 partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\RECOVER Y2.img
      RECOVERY2 partition UPDATE ...OK

      Writing DTS partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\DTS.img
      DTS partition UPDATE ...OK

      Writing MODEM partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\MODEM.i mg
      MODEM partition UPDATE ...OK

      Writing MODEM_DSP partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\MODEM_D SP.img
      MODEM_DSP partition UPDATE ...OK

      Writing 3RDMODEM partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\3RDMODE M.img
      3RDMODEM partition UPDATE ...OK

      Writing SYSTEM partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\SYSTEM. img
      SYSTEM partition UPDATE ...OK

      Writing MODEM_DTB partition with file C:\Users\pcarpovich\Trash\MATE8\DC_Phoenix\MODEM_D TB.img
      MODEM_DTB partition UPDATE ...OK
      Software written
      01/03/2017 02:14:05 p.m. Writing device finished OK

      Thanks,
      Pablo
      You do not have permission to view this gallery.
      This gallery has 2 photos.

      Comment

      • #4
        Sorry, I could connect it again, this is the message from DC Phoenix

        Only 1 device, selected to get information

        Getting information from the device...

        COM4: HUAWEI Mobile Connect - Modem
        COM3: DBAdapter Reserved Interface (COM3)
        COM5: Android Adapter PCUI (COM5)

        Getting information from the device...ERROR

        Comment

        • #5
          Originally posted by pvitruvian View Post
          Sorry, I could connect it again, this is the message from DC Phoenix

          Only 1 device, selected to get information

          Getting information from the device...

          COM4: HUAWEI Mobile Connect - Modem
          COM3: DBAdapter Reserved Interface (COM3)
          COM5: Android Adapter PCUI (COM5)

          Getting information from the device...ERROR
          Open method 2, step 1 guide then you will find what and from where to get firmware for your phone.
          >>Free Octohide VPN for Android, find it on Google Play Here<<

          Comment

          • #6
            Thank you Valdemaras! I recovered my phone with Method 2 using NXT-AL10_M00A102_Factory_firmware_Global_Nonspecific_A ndroid_6.0_EMUI_4.0.dgtks file.

            Comment

            • #7
              Great news, thank you for informing us.
              >>Free Octohide VPN for Android, find it on Google Play Here<<

              Comment

              Previous template Next
              Working...
              X

              We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

              By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

              I Agree