Hello everyone
i need to change my 5573 imei. Even everything seems okay but program says ERROR
I aware 5573 untested i will responsible any possible trouble.
Any advices are welcome.
program interface messages below for safety i have use XX marks instead part of IMEI digits.
Check account status
User : XXXXXXX
Credits left : 7
Activated features:
Software debugger
================================================== =================
================================================== =================
DC - Unlocker 2 Client 1.00.1366
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM3
Found modem : E5573s-320
Model : Huawei E5573 (untested)
IMEI : 8661XXXXXXXX569
Serial NR. : V5Y7S1XXXXXXX108
Firmware : 21.180.17.00.00
Dashboard version : WEBUI_17.100.08.00.21
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
For unlock, may require firmware change, check tutorial or contact support
================================================== =================
AT^NVWREX=0,0,16,XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 00
ERROR
i need to change my 5573 imei. Even everything seems okay but program says ERROR
I aware 5573 untested i will responsible any possible trouble.
Any advices are welcome.
program interface messages below for safety i have use XX marks instead part of IMEI digits.
Check account status
User : XXXXXXX
Credits left : 7
Activated features:
Software debugger
================================================== =================
================================================== =================
DC - Unlocker 2 Client 1.00.1366
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM3
Found modem : E5573s-320
Model : Huawei E5573 (untested)
IMEI : 8661XXXXXXXX569
Serial NR. : V5Y7S1XXXXXXX108
Firmware : 21.180.17.00.00
Dashboard version : WEBUI_17.100.08.00.21
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
For unlock, may require firmware change, check tutorial or contact support
================================================== =================
AT^NVWREX=0,0,16,XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 00
ERROR
Comment