probleme with k4505 vodafone

[Wind10]

I have finally flashed the USB dongle with the Mobile Partner dashboard, and it works.

The only drawback is that you have to run Data Card switch program (DataCard_Setup 32bit.exe) after you plug in the usb dongle every time, or otherwise, the modem will not be detected by the system and work as a usb storage only.

[Wind10]

Yeah, it rocks! Many Thanks Kcmok....

I did only update 2 of the 4 drivers, and missed two of them.
After updating the all 4 driver, my original mobile partner (16.001.06.01.500 ) for E180 recognize the modem

The whole thing is about the vodafone driver ......
Just to be frank, I never work with the VMC , and don't know why, I just hate something HARD BRANDED like SMV

Especially there is no benefit to use VMC over mobile partner~

I think it's time to flash the usb dongle to KILL the VMC, it's useless, haha
though it doesn't affect me, VMC can't directly install to WinSrv 2003 unless I "update" its msi~

[kcmok]

The mobile partner V100R001 failed to detect the modem, while the dailup program can after updating the vodafone driver with the unbranded one.

Seems I have to consider flashing the modem, and not to keep the VMC....

Did you follow the steps in the article? Especially remove the old driver. Step 7 is very important and you may need to change the device manager setting to show hidden drivers to successfully remove vodafone drivers. This link may be useful : http://www.tech-recipes.com/rx/504/h...-and-services/ It is only when you remove all FOUR old drivers that you can use the modified MP.

[Wind10]

The mobile partner V100R001 failed to detect the modem, while the dailup program can after updating the vodafone driver with the unbranded one.

Seems I have to consider flashing the modem, and not to keep the VMC....

[Wind10]

I upload here: (download 10 times only)

http://rapidshare.com/files/402953023/mpk3765.rar.html

MD5: D1FBBA6FF30A3AA80EB85C7A9AA5009B

Many Thanks KcMok

I have downloaded the file, and trying to run the mobile partner V100R001.

[kcmok]

I upload here: (download 10 times only)

http://rapidshare.com/files/402953023/mpk3765.rar.html

MD5: D1FBBA6FF30A3AA80EB85C7A9AA5009B

[Wind10]

try this link then:
http://www.dc-unlocker.com/forum/sho...ighlight=K3765

Thanks Kcmok.

It's what I looking for,and just find that the link is dead

( http://home.exetel.com.au/money4artsake/mpk3765.rar )

[kcmok]

try this link then:

http://www.dc-unlocker.com/forum/showthread.php?t=2062&highlight=K3765

[Wind10]

Use this one:
Link is: http://bit.ly/K3765K4505

I have used this one on a friend's K3765 and it works flawlessly.

I have downloaded this one, and it will flash the mobile partner into the USB dongle and the VMC in the USM dongle will be removed.

I want to use this Mobile Partner without FLASHING the usb dongle, and the solution is to copy the Mobile Partner Program files from the usb dongle ( the virtual cdrom) after flashing with the provided dashbroad upgrade file (http://bit.ly/K3765K4505)

[kcmok]

Thanks All

I have successfully install the provided driver to recognize the K3765, and access internet with SIM card (other than SMV) with the Dailup program downloaded from here.

Since the VMC dashboard software inside the donge (9.4.4_RC4_3.4.10_H) is not available at dc-files now, I would like to follow Fakiro's suggestion to copy the Mobile Partner dashbohard to the micro SD instead of flashing dashboard inside the modem dongle.

I have tried with the generic Mobile Partner UTPS16.001.06.01.500, and failed to detect the modem. May I know if anyone did flash the modem dongle with the K3765 K4505 Ultimate Dashboard UTPS16.001.06.01.500 in this thread?

If yes, would kindly help to post the contents (Mobile partner program file actually) of the modem dongle here?

Many Thanks

Use this one:
Link is: http://bit.ly/K3765K4505

I have used this one on a friend's K3765 and it works flawlessly.

[Wind10]

K3765 K4505 Ultimate Dashboard Mobile Partner Program File

Thanks All

I have successfully install the provided driver to recognize the K3765, and access internet with SIM card (other than SMV) with the Dailup program downloaded from here.

Since the VMC dashboard software inside the donge (9.4.4_RC4_3.4.10_H) is not available at dc-files now, I would like to follow Fakiro's suggestion to copy the Mobile Partner dashbohard to the micro SD instead of flashing dashboard inside the modem dongle.

I have tried with the generic Mobile Partner UTPS16.001.06.01.500, and failed to detect the modem. May I know if anyone did flash the modem dongle with the K3765 K4505 Ultimate Dashboard UTPS16.001.06.01.500 in this thread?

If yes, would kindly help to post the contents (Mobile partner program file actually) of the modem dongle here?

Many Thanks

[crescent]

Same here. The switcher does not seem to do anything, so no way to put in the new drivers. I am running Win 7 32 bit version.

Run the Switch. Manually replace the installed drivers with the new drivers. Got to program files-->Vodafone--> Driver--Replace the whole pccard folder with the new drivers. Then Go to Device manager Under Modem and Ports you will find Vodafone Drivers Update all. Then Restart the system. It should work now.

[crescent]

Connect modem to usb and run the switcher:

http://rapidshare.com/files/362814219/K3765_K4505_DataCard_Setup_Switch.rar

At the driver request use:

http://rapidshare.com/files/360812366/K4505_vodafone_windows_7-32bit.rar

Then you can flash it

The Switch doesn't work for me...

[william123]

in first you need to have vodafone mobile connect installed in your pc. After run the updated dashboard and remove vodafone mobile connect form your pc.
Reboot and put your modem into plug usb and instal mobile partner and it works !
if you have any probleme with detecting your modem , use the switch to have your modem recognyzed

[kcmok]

Did as you said... Still not able to debrand... Modem not detected

Same here. The switcher does not seem to do anything, so no way to put in the new drivers. I am running Win 7 32 bit version.