detect modem please help

[sirnavid]

model e5573 2017.10.18 18:53:11.896 Logging enabled !

================================================== =================

DC - Unlocker 2 Client 1.00.1390

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

modem not found !

[Valdemaras]

If you can not detect modem, check this:
Make sure all drivers are installed or whatever else comes in device's drive
Make sure device is visible in device manager
Make sure modems connection software/WEBUI/Dashboard is installed, but not running. (if there is one)
Use Autodetect on DC-unlocker “select model” line.
Make sure modem is not connected to internet.

[sirnavid]

017.10.18 21:07:16.864 Logging enabled !

================================================== =================

DC - Unlocker 2 Client 1.00.1390

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found Applications port COM213

Found modem : E5573s-320
Model : Huawei AuthVer 4 modem (New)
IMEI : 866162021794103
Serial NR. : V5Y7S15B10009663
Firmware : 21.180.17.00.401
Dashboard version : WEBUI_17.100.08.01.401
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

================================================== =================

Unlocking, please wait ...

Waiting modem/phone to be ready ...
Modem successfully unlocked !

Credits left : 7

but still lock

2017.10.18 21:22:49.016 Logging enabled !

================================================== =================

DC - Unlocker 2 Client 1.00.1390

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found Applications port COM213

Found modem : E5573s-320
Model : Huawei AuthVer 4 modem (New)
IMEI : 866162021794103
Serial NR. : V5Y7S15B10009663
Firmware : 21.180.17.00.401
Dashboard version : WEBUI_17.100.08.01.401
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

================================================== =================

Unlocking, please wait ...

Waiting modem/phone to be ready ...
Error connecting to server !

Error code 62

unlock failed !

================================================== =================

Unlocking, please wait ...

ERROR ! Port busy, posibly occupied by another process !

Error code 20

unlock failed !

[Valdemaras]

017.10.18 21:07:16.864 Logging enabled !

================================================== =================

DC - Unlocker 2 Client 1.00.1390

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found Applications port COM213

Found modem : E5573s-320
Model : Huawei AuthVer 4 modem (New)
IMEI : 866162021794103
Serial NR. : V5Y7S15B10009663
Firmware : 21.180.17.00.401
Dashboard version : WEBUI_17.100.08.01.401
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

================================================== =================

Unlocking, please wait ...

Waiting modem/phone to be ready ...
Modem successfully unlocked !

Credits left : 7

but still lock

2017.10.18 21:22:49.016 Logging enabled !

================================================== =================

DC - Unlocker 2 Client 1.00.1390

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found Applications port COM213

Found modem : E5573s-320
Model : Huawei AuthVer 4 modem (New)
IMEI : 866162021794103
Serial NR. : V5Y7S15B10009663
Firmware : 21.180.17.00.401
Dashboard version : WEBUI_17.100.08.01.401
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 10 (unlock attempts left : 0)

================================================== =================

Unlocking, please wait ...

Waiting modem/phone to be ready ...
Error connecting to server !

Error code 62

unlock failed !

================================================== =================

Unlocking, please wait ...

ERROR ! Port busy, posibly occupied by another process !

Error code 20

unlock failed !

Make sure to restart device after unlock was done.

[sirnavid]

thx reset but nothing happen
try write f.w with dc then
10/19/2017 02:53:54 ب.ظ Starting to write device...
Validating file...
File to write: C:\Users\Novin Pendar\Desktop\Huawei_E5573s-320_Firmware_21.110.99.04.00_general_SIGNVER.dgtks
File version: 21.110.99.04.00
Looking for attached port...
Attached port found: COM37
Changing device to download mode...

USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 6&182a12da&0&6

USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 6&182a12da&0&6
Device has signed firmware
Device found
Preparing to write...
Device Product: HUAWEI BV7R11EU__0
Writing file 1 of 10...
Writing file 2 of 10...
Writing file 3 of 10...
Writing file 4 of 10...
Writing file 5 of 10...
Writing file 6 of 10...
Writing file 7 of 10...
Writing file 8 of 10...
Writing file 9 of 10...
Writing file 10 of 10...
Software written
Changing device to diagnostic mode...

USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 6&182a12da&0&6

USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 6&182a12da&0&6
Searching ports in diagnostic mode by VID_12D1
Setting device
10/19/2017 02:55:02 ب.ظ Writing device finished OK

now only detect on network adapters on device manager and two green led on modem on...

please help how can revive it
on diag port or normal mode

[Valdemaras]

Can try flash again with same firmware in this case or can flash back to it's original firmware version.

[sirnavid]

thx for reply and how can flash?
no detect by pc
think need test point?

[petar258]

Excuse me if i make mess in the tread but i want to make note for developers of dc-unlocker. When i click detect with connected e5573, dc-unlocker detects it on port 10, in device manager i see e5573 is on ports 9 and 10. When click unlock,some command is sent to modem, it disappeared from device manager and some seconds later it appears again but changes ports to 7 and 8 and dc-unlocker obviously not check ports again, it maybe tryed on ports 9 and 10 and gives error. You maybe must make change in software so it checks ports again before unlock.

[Valdemaras]

Excuse me if i make mess in the tread but i want to make note for developers of dc-unlocker. When i click detect with connected e5573, dc-unlocker detects it on port 10, in device manager i see e5573 is on ports 9 and 10. When click unlock,some command is sent to modem, it disappeared from device manager and some seconds later it appears again but changes ports to 7 and 8 and dc-unlocker obviously not check ports again, it maybe tryed on ports 9 and 10 and gives error. You maybe must make change in software so it checks ports again before unlock.

Detection takes com port from modems section not from ports section.