Huawei E5885 wifi router not detected

[sarighiol]

Huawei E5885 wifi router not detected by DC-unlocker v 1.00.1396. Any solution? It is not seen by the computer as a modem, but as a network card. No modem driver instaled.

[Valdemaras]

If you can not detect modem, check this:
Make sure all drivers are installed or whatever else comes in device's drive
Make sure device is visible in device manager
Make sure modem’s connection software/WEBUI/Dashboard is installed, but not running. (if there is one)
Use Autodetect on DC-unlocker “select model” line.
Make sure modem is not connected to internet.

Make sure device’s gateway/IP does not duplicate with active adapter

[sarighiol]

If you can not detect modem, check this:
Make sure all drivers are installed or whatever else comes in device's drive
Make sure device is visible in device manager
Make sure modem’s connection software/WEBUI/Dashboard is installed, but not running. (if there is one)
Use Autodetect on DC-unlocker “select model” line.
Make sure modem is not connected to internet.

Make sure device’s gateway/IP does not duplicate with active adapter

The modem driver do not install. I tried three computers, Windows 7 x32 and Windows 10 x64. Just when I reinstalled the modem's firmware, the modem drivers were visible in Device Manager, for a short time. This means that the router's modem port must be opened by AT commands. This router has the latest type of algorithms and most old AT commands not work.
Device’s gateway/IP does not duplicate with active adapter because Huawei E5885 has IP 192.168.8.1.
Huawei E5885 is a MIFI router with RJ45 ethernet port.