hard brick mate 10 pro with DC Phoenix 0.0.0.52

[rosheko]

I think i hard brick this mate 10 pro with DC Phoenix 0.0.0.52
I have tried rebrand BLA-A09C567 (BLA-A09C567B112 ROM) to BLA-L29C636 (BLA-L29C636B137 ROM) using this guide - https://forum.xda-developers.com/mat...ckage-t3716814
After rebooting and "install update" message i have black screen brick
No response on keys
USB connection to PC shows "HI3650" usb device connected
I have black fastboot only
I have tried to flash BLA-A09C567B110 (8.0.0.110) firmware with DC Phoenix 0.0.0.52 (i pay 15 euros) and get message in Phoenix window "Writing device finished - INCOMPLETE"
And now i don't have fastboot, no response to keys. Only LED blinking twice then i press power button.

Please help me!

[Valdemaras]

In this case you would need to locate testpoints on it's main board and connect phone to pc using it, there is a small chance then that it would flash via it. Otherwise only replacing main board itself could resolve your problem.

[k4fari]

In this case you would need to locate testpoints on it's main board and connect phone to pc using it, there is a small chance then that it would flash via it. Otherwise only replacing main board itself could resolve your problem.

how many of us will replace the boards? why don't you make a sticky thread that Mate 10 and Mate 10 board softwares are not supported by DC Phoenix. So that before buying one should be clear, else update the DC Phoenix to handle these two hand sets board software.
Regards

[rosheko]

In this case you would need to locate testpoints on it's main board and connect phone to pc using it, there is a small chance then that it would flash via it. Otherwise only replacing main board itself could resolve your problem.

Do you have testpoints for mate 10 pro?

[k4fari]

No I don't have any test points.

[rosheko]

In this case you would need to locate testpoints on it's main board and connect phone to pc using it, there is a small chance then that it would flash via it. Otherwise only replacing main board itself could resolve your problem.

is testpoint firmware for mate 10 pro available on dc-phoenix support area? and testpoint images in dc-phoenix program?

[Valdemaras]

is testpoint firmware for mate 10 pro available on dc-phoenix support area? and testpoint images in dc-phoenix program?

No, it is not.

[tiphergane]

lost for lost, teardown the phone, short every testpoint with ground then once located flash the testboard to the motherboard

[gsmgeo]

lost for lost, teardown the phone, short every testpoint with ground then once located flash the testboard to the motherboard

well and that from it, I know where TP, but as well as "" gives an error message

[mydanuyen]

i need testpoint mate 10 pro , please share it

[salvo1278]

hello guys I'm desperately looking for the testpoint if you have it you can also share it in private,

[manager77]

Has anyone news about mate 10 testpoint? My phone is death from july...pff

[henrysinn]

Hi all.
Might now have info re testpoint.
"Working on it" at post 208 onwards at https://forum.xda-developers.com/mat...infos-t3789044

[manager77]

That's ok...l have posted testpoint there...same manager77 from xda..

[manager77]

and....maybe Valdemaras gives me some gift... because after mate10/pro testpoint show up more clients for dc-unlocker will come