Tweet
Hi Sir.
I need some help with these latest gadgets.
have a Mate 10 Pro BLA-L29 Cust 605 (Latin American) Build B134, I was trying to do a rebrand using old methods and ended up corrupting.
To summarize: I went to the Dc Phoenix and installed the factory firmware available for the Mate Pro 10 (BLA). There are 2 board software available, the installation went well, but the system does not go up. This is a shame because I need to access the factory mode to be able to customize with the HCU Client and then finish the repair with the Dc Phoenix but I do not know what I do anymore.
I decided not to touch the device any more so as not to get worse ..
The current condition of the device is as follows:
Enters fastboot mode normally.
Enter the mode with the options: * Reboot System now * Wipe datafactory reset * Wipe cache partition
It goes into eRecovery mode normally.
I believe it has salvation, but I can not see any other way to recover the device but through another Board Software for it.
Follow:
fastboot oem get-product-model ... (bootloader) BLA-L29 OKAY [0.014s] finished. total time: 0.018s
fastboot getvar vendorcountry vendorcountry: hw / la finished. total time: 0.011s
fastboot oem get-build-number ... (bootloader): System-FAC 6.0.0.030 (00O7) OKAY [0.011s] finished. total time: 0.012s
fastboot getvar rescue_enter_recovery getvar: rescue_enter_recovery FAILED (remote: FAIL: need all image flashed!) finished. total time: 0.029s
fastboot oem oeminforead-SYSTEM_VERSION ... (bootloader): BLA-L29 8.0.0.134 (C605CUSTC605D1) OKAY [0.021s] finished. total time: 0.05s
I need some help with these latest gadgets.
have a Mate 10 Pro BLA-L29 Cust 605 (Latin American) Build B134, I was trying to do a rebrand using old methods and ended up corrupting.
To summarize: I went to the Dc Phoenix and installed the factory firmware available for the Mate Pro 10 (BLA). There are 2 board software available, the installation went well, but the system does not go up. This is a shame because I need to access the factory mode to be able to customize with the HCU Client and then finish the repair with the Dc Phoenix but I do not know what I do anymore.
I decided not to touch the device any more so as not to get worse ..
The current condition of the device is as follows:
Enters fastboot mode normally.
Enter the mode with the options: * Reboot System now * Wipe datafactory reset * Wipe cache partition
It goes into eRecovery mode normally.
I believe it has salvation, but I can not see any other way to recover the device but through another Board Software for it.
Follow:
fastboot oem get-product-model ... (bootloader) BLA-L29 OKAY [0.014s] finished. total time: 0.018s
fastboot getvar vendorcountry vendorcountry: hw / la finished. total time: 0.011s
fastboot oem get-build-number ... (bootloader): System-FAC 6.0.0.030 (00O7) OKAY [0.011s] finished. total time: 0.012s
fastboot getvar rescue_enter_recovery getvar: rescue_enter_recovery FAILED (remote: FAIL: need all image flashed!) finished. total time: 0.029s
fastboot oem oeminforead-SYSTEM_VERSION ... (bootloader): BLA-L29 8.0.0.134 (C605CUSTC605D1) OKAY [0.021s] finished. total time: 0.05s
Comment