Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

p10 lite brick almost recover from dc phoenix

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • p10 lite brick almost recover from dc phoenix

    i bought 15 credits to use the dc phoenix tool to flash the firmware of my phone, everything went ok except for the verlist
    the phone reboot in emui logo and after the 5% it says installation failed

    Looking for a device in upgrade mode
    No devices detected in upgrade mode

    Looking for a device in fastboot mode

    Device found: 6XTDU17601000028


    17/8/2018 17:07:13 Starting to write device in FASTBOOT mode...

    Device found: 6XTDU17601000028

    IMEI: 864065030441586
    Build number: :WAS-LX3C25B105
    Product model: WAS-LX3
    Extracting partition XLOADER...
    Preparing file to write...

    Writing XLOADER partition with file XLOADER
    XLOADER partition UPDATE ...FAILED
    Cannot get FBlock info from device
    Activating backdoor: DONE
    Extracting partition XLOADER...
    Preparing file to write...

    Writing XLOADER partition with file XLOADER
    XLOADER partition UPDATE ...OK
    Extracting partition FW_LPM3...
    Preparing file to write...

    Writing FW_LPM3 partition with file FW_LPM3
    FW_LPM3 partition UPDATE ...OK
    Extracting partition FASTBOOT...
    Preparing file to write...

    Writing FASTBOOT partition with file FASTBOOT
    FASTBOOT partition UPDATE ...OK
    Extracting partition MODEMNVM_UPDATE...
    Preparing file to write...

    Writing MODEMNVM_UPDATE partition with file MODEMNVM_UPDATE
    MODEMNVM_UPDATE partition UPDATE ...OK
    Extracting partition TEEOS...
    Preparing file to write...

    Writing TEEOS partition with file TEEOS
    TEEOS partition UPDATE ...OK
    Extracting partition TRUSTFIRMWARE...
    Preparing file to write...

    Writing TRUSTFIRMWARE partition with file TRUSTFIRMWARE
    TRUSTFIRMWARE partition UPDATE ...OK
    Extracting partition SENSORHUB...
    Preparing file to write...

    Writing SENSORHUB partition with file SENSORHUB
    SENSORHUB partition UPDATE ...OK
    Extracting partition FW_HIFI...
    Preparing file to write...

    Writing FW_HIFI partition with file FW_HIFI
    FW_HIFI partition UPDATE ...OK
    Extracting partition BOOT...
    Preparing file to write...

    Writing BOOT partition with file BOOT
    BOOT partition UPDATE ...OK
    Extracting partition RECOVERY...
    Preparing file to write...

    Writing RECOVERY partition with file RECOVERY
    RECOVERY partition UPDATE ...OK
    Extracting partition RECOVERY2...
    Preparing file to write...

    Writing RECOVERY2 partition with file RECOVERY2
    RECOVERY2 partition UPDATE ...OK
    Extracting partition DTS...
    Preparing file to write...

    Writing DTS partition with file DTS
    DTS partition UPDATE ...OK
    Extracting partition MODEM_FW...
    Preparing file to write...

    Writing MODEM_FW partition with file MODEM_FW
    MODEM_FW partition UPDATE ...OK
    Extracting partition CACHE...
    Preparing file to write...

    Erasing CACHE partition
    Partition CACHE erased

    Writing CACHE partition with file CACHE
    CACHE partition UPDATE ...OK
    Extracting partition SYSTEM...
    Preparing file to write...

    Writing SYSTEM partition with file SYSTEM
    SYSTEM partition UPDATE ...OK
    Extracting partition USERDATA...
    Preparing file to write...

    Erasing USERDATA partition
    Partition USERDATA erased

    Writing USERDATA partition with file USERDATA
    USERDATA partition UPDATE ...OK
    Software written
    17/8/2018 17:17:31 Writing device finished OK

    Waiting for fastboot device...

    Device found: 6XTDU17601000028


    Writing rescue_recovery partition with file recovery
    rescue_recovery partition UPDATE ...OK
    Looking for device in upgrade mode...
    COM3: Android Adapter PCUI (COM3)
    COM8: DBAdapter Reserved Interface (COM8)

    17/8/2018 17:18:03 Starting to write device in UPGRADE mode...
    File to update: Warsaw-L03_C25B101_Firmware_Colombia_CLARO_S.A._Android7. 0_EMUI5.1.APP
    Validating file...
    Looking for attached port...
    Preparing to write...
    Writing partition: SHA256RSA...OK
    Writing partition: CRC...OK
    Writing partition: CURVER...OK
    Writing partition: VERLIST...
    Error downloading file Warsaw-L03_C25B101_Firmware_Colombia_CLARO_S.A._Android7. 0_EMUI5.1_3.dtwork, partition: VERLIST
    Error writing software

    17/8/2018 17:18:40 Starting to write device in UPGRADE mode...
    File to update: update_WAS-L03_C25B101_claro_la.APP
    Validating file...
    Looking for attached port...
    Preparing to write...
    Device does not support this update file
    Error writing software
    17/8/2018 17:19:16 Writing device finished with ERROR

    Cannot update device in upgrade mode


    I read about if i get an error from verlist i need to use the HCU client but like i said before i just bought the exact 15 credits to use the dc phoenix tool, i donīt know if i have to buy the 72 Hours license for unlimited all functions + DC Phoenix or i just need to charge some amount of credits to use the program to repair the vendor/country info or i have to do another thing o flash something else (sorry for my english)

  • #2
    You can buy 8 credits for repairing vendor and country by HCU only.
    Phone must fully start and you should be able to enter manufacture mode on it for repair.
    If phone not start, try to flash factory firmware/board software as in instructions here https://www.dc-unlocker.com/DC-Phoen...epair-tutorial

    Comment


    • #3
      Originally posted by Vincentas View Post
      You can buy 8 credits for repairing vendor and country by HCU only.
      Phone must fully start and you should be able to enter manufacture mode on it for repair.
      If phone not start, try to flash factory firmware/board software as in instructions here https://www.dc-unlocker.com/DC-Phoen...epair-tutorial
      I already tried to flash factory firwmware/board software, i always get the same problem, it stops after 5% in upgrade mode and says installation failed

      Comment

      Working...
      X