Honor 9 (STF-L09) - Found and connected to USB via Testpoints... wat do now?

[C3lv1c3]

Hi,

Since DC-Phoenix killed my smartphone some month ago I finaly found a solution and connected it via Testpoints to Computer. It is shown up as "USB SER" in Device Manager with a yellow "!"...
Now I don't know what I must do next. Anyone can help me please?

EDIT.: FOUND the right drivers ... now it shows HUAWEI USB COM 1.0 (COM3) in Device Manager
Not recognized by DC-Phoenix -
"Looking for a device in upgrade mode
No devices detected in upgrade mode

Looking for a device infastboot mode
No devices detected infastboot mode

No device detected to update"

[Valdemaras]

Have you selected board software for flashing? All other files won't suit for this mode. See 3rd method from dc-phoenix guide.

[C3lv1c3]

Have you selected board software for flashing? All other files won't suit for this mode. See 3rd method from dc-phoenix guide.

Hi, I selected "Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Nethe rlands_Portugal_Switzerland_Spain_Italy_Austria_Po land_Denmark_Finland_Czech_Republic_Hungary.APP" file.

I think I need a file specially for testpoint flashing. THX for help!
Can you make such a file?

[C3lv1c3]

FIXED:
Phone revived.
I used Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB

[C3lv1c3]

Ok sorry for multi post:

Phone got revived from dead.
It is stuck now in DCPhoenix:
"Writing rescue_recovery partition with file recovery" in DC-Phoenix (Loads and Loads and Loads already finished 4 times nothing happens anymore)
-Huawei eRecovery is opened on the smartphone.

what do now?

[Valdemaras]

Flash another full stock rom. Make sure phone boots up after flashing board software alone.

[C3lv1c3]

worked.
Do you know how to get back Huawei Boot up Animation back? when I turn on smartphone only some strange red and green colors show up instead.

Also any way to get OTA back? IMEI/Model Nr. are totaly wrong in Software. Huawei Updater doesn't open.

[Valdemaras]

After flashing board software you must flash full stock rom in hopes for your animations to return. You also may need to repair sn/imei and rest of the info on hcu as guide advices if you read it at least once.

[Radiotrance]

I can't revive the phone with new DC Phoenixes (105 and above).

DC Phoenix 0.0.0.115
user:radiotrance_l1y

Looking for a device in force upgrade mode
Device detected:
COM7: HUAWEI USB COM 1.0 (COM7)
08.08.2019 19:10:01 Starting to write device in FASTBOOT mode...
File to update: Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB.dgtks
Device detected:
COM7: HUAWEI USB COM 1.0 (COM7)

Process identifier:17522667


Writing bootloader...
Writing Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB_3.dtwork...

USB Device REMOVAL
Type: @oem122.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 6&35278267&2&2


USB Device INSERTION
Type: @oem122.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 6&35278267&2&2


Error writing Bootloader
08.08.2019 19:10:12 Writing device finished - INCOMPLETE

Phone is in bootloop. eMMC chip was retracted form the board and tested.
What could be done?

[Valdemaras]

You should use loader + oeminfo solution, after phone's in fastboot use firmware that is in mobile for highest chance to revive it.

[Radiotrance]

Could you please be more specific? How to use this solution and which loader to select?

[Valdemaras]

Could you please be more specific? How to use this solution and which loader to select?

Connect phone via testpoint
Select correct bootloader on DC-phoenix
Write your wished data in OEMINFO secion, it must match firmware file data that you want to update your device with
More info here http://forum.gsmhosting.com/vbb/f100...other-2533473/