P10 VTR-L29 brick after write OEMINFO and Fastboot flash

[sakura]

TP, fastboot, update, TWRP. Many times and try, and finaly phone live.

[Deadoc3]

TP, fastboot, update, TWRP. Many times and try, and finaly phone live.

Do you can help me describing all of passages and files that you have used?

I cannot found working twrp for my vtr-l09

And also, you can share with me v73 of dc-phoenix software? I cannot found it

[jernrn]

I have a dead huawei p10 vtr L29 too ı reach to motherboard to use testfiles but not working.phone not open

[Valdemaras]

I have a dead huawei p10 vtr L29 too ı reach to motherboard to use testfiles but not working.phone not open

Then can only repair it by replacing main board.

[jernrn]

Then can only repair it by replacing main board.

I mean ı can only flash bootloader kirin960.v3 and oeminfo vtr-l29 after that dc see the device but thats all.flashing update.app not working not finishing. what is the right firmware about VTR-L29?

[Valdemaras]

The right firmware is the one that matches oeminfo data which you have flashed alongside loader.

[jernrn]

The right firmware is the one that matches oeminfo data which you have flashed alongside loader.

can you give me the link? ı try to flash (VTR-AL00A_HLVTRAL00M00A039_Factory_firmware_China_Nons pecific_Android_7.0_EMUI_5.1_05022AVG_testpoint) but didn't work. after that try to flash (Victoria-L29B_C185B151_Firmware_United_Arab_Emirates_Iraq_E gypt_Ethiopia_Pakistan_Qatar_Oma.APP) didn't work too. which is the correct one.

[jernrn]

Device detected:
COM3: HUAWEI USB COM 1.0 (COM3)
BOOTLOADER File to update: Kirin960_T2_A7.0_V3
OEM File to update: VTR-L29
22.3.2019 19:54:37 Starting to write device...

Writing bootloader...
Writing Kirin960_T2_A7.0_V3_3.dtwork...
Writing Kirin960_T2_A7.0_V3_4.dtwork...
Writing Kirin960_T2_A7.0_V3_5.dtwork...

Waiting for fastboot device...

Error detecting device in fastboot mode
22.3.2019 19:55:57 Writing device finished OK

device get vibration but dont reboot for fastboot mode.then I make click the testpoint and connect phone to ps again HUAWEI USB COM 1.0 (COM3) and try flash update file,update.app. but dont work

[Valdemaras]

Device detected:
COM3: HUAWEI USB COM 1.0 (COM3)
BOOTLOADER File to update: Kirin960_T2_A7.0_V3
OEM File to update: VTR-L29
22.3.2019 19:54:37 Starting to write device...

Writing bootloader...
Writing Kirin960_T2_A7.0_V3_3.dtwork...
Writing Kirin960_T2_A7.0_V3_4.dtwork...
Writing Kirin960_T2_A7.0_V3_5.dtwork...

Waiting for fastboot device...

Error detecting device in fastboot mode
22.3.2019 19:55:57 Writing device finished OK

device get vibration but dont reboot for fastboot mode.then I make click the testpoint and connect phone to ps again HUAWEI USB COM 1.0 (COM3) and try flash update file,update.app. but dont work

Then only way to repair it is by replacing main board.

[jernrn]

Then only way to repair it is by replacing main board.

okay thanks

[gsm4all]

VTR-l09 bricked with oeminfo info write, i have tried all settings, all firmware from support, nothing helped. Always dead, no fastboot mode, no erecovery. Only USB 1.0 mode.
Usb 1.0 kirin 960 V4 - phone booted in fastboot but after flashing can turn on. Finally repaired with this file https://drive.google.com/file/d/1uMr...s9Dg8QJDs/view . First boot with kirin 960 V4, then Flash 1. revive flasher.bat from archive.