Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Bricked Mate 20 Prp / 10.0.0.180 C432

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bricked Mate 20 Prp / 10.0.0.180 C432

    hi i have a bl locked Mate 20 Pro here

    when i wnat to write a Update.app (same version)
    than i got on the phone screen this

    Attention!
    Please update system again

    ERROR!
    Func NO : 11 (recovery image)
    Func NO : 2 (load failed)

    this is my girlfriends phone while update the phone shuts down without any reason

    also it boots standart in recovery
    but there is also only avavible
    update via wifi (i tried not working)
    recovery with backup
    wipe data (grayed out, also not working)
    reboot
    power off (if i use power off it boots agoin into this "mini" recovery)

    button vol +/- same time with connectected cable also not work

    i download the boardsoftware wich is other modification than this phone
    set testpoint
    it flash bootloader xloader / bootloader
    after it stop working

    phone is
    frp locked
    and BL is also locked
    not need remove FRP is phone of my girlfriend
    only bring it back alive that is what i want

    i think recovery is damaged...so is there any way to repair firmware on phone?

  • #2
    Hello
    Needed more info about phone
    Check via fastboot build number , and yes what firmware you flashing?

    Comment


    • #3
      if i do with testpoint

      DC Phoenix 0.0.0.125
      user:ronald001

      Looking for a device in force upgrade mode
      Device detected:
      COM23: HUAWEI USB COM 1.0 (COM23)
      02.04.2020 23:43:47 Starting to write device in FASTBOOT mode...
      File to update: C:\Users\Ronald\Downloads\Laya-AL00C-BD 1.0.0.63_Board_Software_general_9.0.0_r3_EMUI_9.0. 0_05022KFQ.dgtks
      Device detected:
      COM23: HUAWEI USB COM 1.0 (COM23)

      Process identifier:23738028


      Writing bootloader...
      Step 1...
      Step 2...
      Step 3...

      Waiting for device REMOVAL/INSERTION...

      USB Device REMOVAL
      Type: @oem27.inf,%qcomdevice00%;HUAWEI USB COM 1.0
      VidPid: VID_12D1&PID_3609
      Instance id: 6&186ac329&0&1


      USB Device INSERTION
      Type: @oem23.inf,%hwfastboot%;Android Sooner Single ADB Interface
      VidPid: VID_18D1&PID_D00D
      Instance id: LHS7N19110002472


      Waiting for fastboot device...
      Device found: LHS7N19110002472


      Looking for a device in fastboot mode
      Device found: LHS7N19110002472


      Getting IMEI...
      Getting build number...
      Getting model ...
      Getting battery state...
      Getting backdoor info...
      Getting lock state info...
      Getting lock boot info...

      SN:LHS7N19110002472
      IMEI:869103041523350
      IMEI1:869103041553365
      MEID:A000009EB1F26F
      Build number: :LYA-L29 10.0.0.180(C432E7R1P5)
      Model: LYA-L29
      Vendor/Country: hw/eu
      Battery state: 0
      OEM lock state info:
      FB LockState: LOCKED
      USER LockState: LOCKED
      OEM get bootinfo:
      locked


      Erasing ver .. .
      Cannot get FBlock info from device
      Cannot get HW FBlock info from device

      Erasing nvme partition
      ERASE partition nvme : FAIL Command not allowed
      02.04.2020 23:44:40 Writing device finished - INCOMPLETE

      Comment


      • #4
        if i do with update.app

        problem is that it cant boot anymore in the upgrade mode

        DC Phoenix 0.0.0.125
        user:ronald001


        File size: 5 252 235 060 bytes
        Current version(BASE_VER): LYA-LGRP2-OVS 10.0.0.1
        Package Type: OFFLINE_UPDATE
        TIME:2019-12-12 09:47:26

        Revision: 1
        Checking partition: BASE_VERLIST
        DC Phoenix 0.0.0.125
        user:ronald001

        Looking for a device in upgrade mode
        No devices detected in upgrade mode
        Device found: LHS7N19110002472

        Detecting recovery partition
        File size: 5 252 235 060 bytes
        Current version(BASE_VER): LYA-LGRP2-OVS 10.0.0.1
        ERECOVERY_KERNEL partition found
        ERECOVERY_RAMDISK partition found
        ERECOVERY_VENDOR partition found

        03.04.2020 00:37:52 Starting to try Rescue Recovery...


        Looking for a device in fastboot mode
        Device found: LHS7N19110002472


        Getting IMEI...
        Getting build number...
        Getting model ...
        Getting battery state...
        Getting backdoor info...
        Getting lock state info...
        Getting lock boot info...

        Build number: :LYA-L29 10.0.0.180(C432E7R1P5)
        Model: LYA-L29
        Vendor/Country: hw/eu
        Battery state: 4108mv
        OEM lock state info:
        FB LockState: LOCKED
        USER LockState: LOCKED
        OEM get bootinfo:
        locked

        Getting base version...
        Base Version: LYA-LGRP2-OVS 10.0.0.180
        Getting cust version...
        Cust Version: LYA-L29-CUST 10.0.0.7(C432)
        Getting preload version...
        Preload Version: LYA-L29-PRELOAD 10.0.0.5(C432R1)

        Process identifier:23739347


        Erasing ver .. .
        File size: 5 252 235 060 bytes
        Current version(BASE_VER): LYA-LGRP2-OVS 10.0.0.1
        Writing rescue_recovery_kernel partition
        RESCUE_RECOVERY_KERNEL partition update ...OK
        Writing rescue_recovery_ramdisk partition
        RESCUE_RECOVERY_RAMDISK partition update ...OK
        Writing rescue_recovery_vendor partition
        RESCUE_RECOVERY_VENDOR partition update ...OK
        Uptade recovery parttion OK

        USB Device REMOVAL
        Type: @oem23.inf,%hwfastboot%;Android Sooner Single ADB Interface
        VidPid: VID_18D1&PID_D00D
        Instance id: LHS7N19110002472

        Looking for device in upgrade mode...

        USB Device INSERTION
        Type: @oem25.inf,%busfilter.devicedesc%;USB Composite Device
        VidPid: VID_12D1&PID_107E
        Instance id: LHS7N19110002472

        Looking for device in upgrade mode...
        Process was cancelled by user
        Enter recovery mode OK

        03.04.2020 00:42:06 Starting to write device in UPGRADE mode...
        Cannot detect device, try again
        03.04.2020 00:42:20 Writing device finished with ERROR

        Comment


        • #5
          hm
          check hold volume up and folume down ( phone off ) and insert usb cable

          Comment


          • #6
            i tried this also
            vol +/- at the same time
            but i only got this strange "mini" recovery

            its spanish cuz my girlfriend is from spain

            wifi recovery (tried also not work)
            recovery with backup
            wipe data (grayed out no funktion)
            restart
            power off (always boot back in this ini recovery)

            Unbenannt.jpg

            Unbenannt.jpg
            Unbenannt.jpg
            this is all what i got when i try with vol up/dowb same time
            Unbenannt.jpg
            hisuite also not work..seems to update recovery..but when is update system it tells me failed
            Last edited by Valdemaras; 2020-04-03, 02:41 PM.

            Comment


            • #7
              This recovery menu appears only when you hold vol+, please hold vol+ and vol- button then connect to usb, it should go into upgrade mode via usb. And then you should continue flashing.
              >>Free Octohide VPN for Android, find it on Google Play Here<<

              Comment


              • #8
                yes i do it....if i power off the phone it restarts again automatic....
                so i disconnect the batterey hold the two buttons connect battery again and it boots into this recovery...

                also it should boot in usb update mode when dc phoenix is finished wuth the fastbootpart...

                and than i got this error

                like there is no recovery....

                doesnt matter i inly got into fastboot and this recovery....
                befor the update fails it was showing me also usb and sd/otg modus...now not amymore....

                last time i tell now i try also the two vol buttons...it put me into the recovery not to the usbupdatemode

                Comment


                • #9
                  my girlfriend dont give up...when icome home phone is still alive
                  she told me she tried 12 times do recovery over wifi and on 13 try it start to recover
                  thanks for your support

                  Comment


                  • #10
                    Originally posted by kangool View Post
                    my girlfriend dont give up...when icome home phone is still alive
                    she told me she tried 12 times do recovery over wifi and on 13 try it start to recover
                    thanks for your support
                    Odd outcome, but thank you for the feedback.
                    >>Free Octohide VPN for Android, find it on Google Play Here<<

                    Comment


                    • #11
                      yes very strange...
                      but i try downgrade and remove frp for fun after...
                      and all works...changing cust...and and and...
                      now phone is original again and my girlfriend is happy

                      Comment

                      Working...
                      X