frd-l19

[mka4321]

hcu doesn't see the phone frd-l19 in testpoint

Read phone info
2020-07-23 10:45:31.015 Open COM port COM5 (HUAWEI USB COM 1.0 (COM5))...
2020-07-23 10:45:31.134 Start read phone info!

2020-07-23 10:45:41.058 ERROR!

No response!

[Valdemaras]

Please provide full info, from top to bottom.

[mka4321]

log?
23.07.2020 10:45:28
HCU Client v1.0.0.0362
Account: mka4321

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode


Read phone info
2020-07-23 10:45:31.015 Open COM port COM5 (HUAWEI USB COM 1.0 (COM5))...
2020-07-23 10:45:31.134 Start read phone info!

2020-07-23 10:45:41.058 ERROR!

No response!

[mka4321]

fastboot?
23.07.2020 10:52:47
HCU Client v1.0.0.0362
Account: mka4321

Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports


Repair
New downgrade/customization limitations : UNLOCKED
2020-07-23 10:52:48.520 Connecting to server...
2020-07-23 10:52:48.737 Connected!
2020-07-23 10:52:49.235 Not found HUAWEI device in Test Point mode!
2020-07-23 10:52:49.353 Found fastboot device: P6LDU16811005708
2020-07-23 10:52:49.461 Reading info...
2020-07-23 10:52:55.495 Done!

Fastboot provided info:
Model: FRD-L19
Firmware: HLNEXTAL10M00A106
SN: P6LDU16811005708
PCB SN: DU3WQF1686031369
WIFI MAC: 5CA86A057BDA
BT MAC: 5CA86A057021
Bootloader FB lock: unlocked
Bootloader User lock: unlocked
CPU: hi3650
Theme color: gold

Found signed IMEI:
IMEI1: 861923030361852
IMEI2: 861923030391867
SIM NW_LOCK status: UNLOCKED
SIM NS_LOCK status: UNLOCKED
SIM SP_LOCK status: UNLOCKED

Found NV data:
Modems: 3
IMEI1: 861923030361852
IMEI2: 861923030391867
IMEI3: 000000000000000
PESN: 00000000
MEID: 00000000000000

Found OEM data:
IMEI:862632030837303
IMEI1:862632034294527
Model: FRD-L19
Firmware: FRD-L09C432B360
Rescue: rescue:FRD-L19C432B131
Vendor: hw
Country: eu
Version limitation: OFF
RD mode: OFF
Phone ID: C4E3CAB0706C677
2020-07-23 10:52:59.143 Repairing...
2020-07-23 10:52:59.571 Write partition modemnvm_img...
2020-07-23 10:52:59.993 Write partition modemnvm_img success!
2020-07-23 10:53:00.031 Unlocking restrictions...
2020-07-23 10:53:00.054 Unlock restrictions fail!
2020-07-23 10:53:00.063 Done!

Memo log saved to C:\моя\HCU\Logs\20200723_105300_HCU_XloaderRepai r_ C4E3CAB0706C677.txt

[mka4321]

restart again to the blue screen until the battery runs out. only disconnecting the battery saves you. more than one recovery mode is not included. the three-button mode goes on until the blue screen lights up until the battery runs out.

[Valdemaras]

Why are you trying to use hcu when your phone doesn't even boot normally then? How to repair mobile check here https://www.dc-unlocker.com/dc-phoen...epair-tutorial

[mka4321]

did everything according to the instructions 3. everything went well. As a result, the phone is constantly rebooting ???
figured it out myself
sn, pcb sn, wifi mak, bl mak?

hcu.Step 6


Put a check mark next to “Repair as empty board” field, rest of the fields will mark themselves automatically. Fill in correct data in marked fields. After all done – press “Repair”

how to find them out?
sorry. the tediousness of translation. about hsu. but the question remains why nothing is installed on l19 except the firmware from l09
dgts frd-emui5.0

because it is not included in the fast boot manually. 1 and 2 method did not help. 3 method point 7 xsu does not see in com mode. the only thing that happened was to put oem from l09 and install firmware from l09

[Valdemaras]

I can see you are doing repair on HCU so phone boots up normally.