Originally posted by Valdemaras
View Post
-
I won't be getting a refund. I am confident that your software really works and after all the problem is on my side. So, thank you for guiding me through all the possible solutions and helping me.
-
Seems board/memory dead as this is way too complicated for something so simple.
Refund is available, but due to recently changed policy by PayPal regarding refunds, taxes are applied, which sometimes may reach up to 40% of the amount paid - in most cases way less. If you see no use in those remaining credits i can do a refund, but you should be aware as informed in user agreement and info message before payment that refunded amount will be less than you paid because of these changes. Please let me know your decision should i initiate refund or freeze account for later use of 3 days license.
Leave a comment:
-
ok, so i was not able to flash with rescue recovery unchecked, it said: "device with unsupported security patch", but after temporarily unlocking the bootloader(by flashing bootloader with testpoint), i was able to flash the firmware incompletely. Here is the log:
Code:DC Phoenix 0.0.0.153 user:mihaifilat Revision: 0 DC Phoenix 0.0.0.153 user:mihaifilat Looking for a device in upgrade mode No devices detected in upgrade mode Device found: 89UDU18531006165 Standard update Not Reboot NOT checkked Update Verlist to server on file load NOT checked Enable testpoint NOT checked Disable testpoint NOT checked Try Rescue Recovery NOT checked Bypass version check NOT checked Old slow algo checked 1/19/2021 10:05:39 PM Starting to write device in FASTBOOT mode... Looking for a device in fastboot mode Device found: 89UDU18531006165 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:89UDU18531006165 IMEI:867906037640067 IMEI1:000000000000000 MEID:00000000000000 Build number: :ANE-LX1 9.1.0.370(C432E7R1P7) Model: ANE-LX1 Vendor/Country: hw/eu Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Process identifier:29698761 Validating file... Erasing ver .. . Waiting for answer... Getting lock state info... Getting backdoor info... Erasing ver .. . Extracting partition XLOADER... Writing XLOADER partition XLOADER partition update ...OK Extracting partition FW_LPM3... Writing FW_LPM3 partition FW_LPM3 partition update ...OK Extracting partition FASTBOOT... Writing FASTBOOT partition FASTBOOT partition update ...OK Extracting partition MODEMNVM_UPDATE... Writing MODEMNVM_UPDATE partition MODEMNVM_UPDATE partition update ...OK Extracting partition TEEOS... Writing TEEOS partition TEEOS partition update ...OK Extracting partition TRUSTFIRMWARE... Writing TRUSTFIRMWARE partition TRUSTFIRMWARE partition update ...OK Extracting partition SENSORHUB... Writing SENSORHUB partition SENSORHUB partition update ...OK Extracting partition FW_HIFI... Writing FW_HIFI partition FW_HIFI partition update ...OK Extracting partition KERNEL... Writing KERNEL partition KERNEL partition update ...OK Extracting partition RAMDISK... Writing RAMDISK partition RAMDISK partition update ...OK Extracting partition RECOVERY_RAMDISK... Writing RECOVERY_RAMDISK partition RECOVERY_RAMDISK partition update ...OK Extracting partition RECOVERY_VENDOR... Writing RECOVERY_VENDOR partition RECOVERY_VENDOR partition update ...OK Extracting partition ERECOVERY_KERNEL... Writing ERECOVERY_KERNEL partition ERECOVERY_KERNEL partition update ...OK Extracting partition ERECOVERY_RAMDISK... Writing ERECOVERY_RAMDISK partition ERECOVERY_RAMDISK partition update ...OK Extracting partition ERECOVERY_VENDOR... Writing ERECOVERY_VENDOR partition ERECOVERY_VENDOR partition update ...OK Extracting partition RECOVERY_VBMETA... Writing RECOVERY_VBMETA partition RECOVERY_VBMETA partition update ...OK Extracting partition ERECOVERY_VBMETA... Writing ERECOVERY_VBMETA partition ERECOVERY_VBMETA partition update ...OK Extracting partition DTS... Writing DTS partition DTS partition update ...OK Extracting partition MODEM_FW... Writing MODEM_FW partition MODEM_FW partition update ...OK Extracting partition VBMETA... Writing VBMETA partition VBMETA partition update ...OK Extracting partition ODM... Writing ODM partition ODM partition update ...OK Extracting partition CACHE... Erasing CACHE partition Partition CACHE erased Writing CACHE partition CACHE partition update ...OK Extracting partition SYSTEM... Writing SYSTEM partition sending sparse file 399455596 bytes Waiting for answer... send sparse file OK sending sparse file 445408576 bytes Waiting for answer... send sparse file OK sending sparse file 467636220 bytes Waiting for answer... send sparse file OK sending sparse file 467161872 bytes Waiting for answer... send sparse file OK sending sparse file 471772560 bytes Waiting for answer... send sparse file OK sending sparse file 449347704 bytes Waiting for answer... send sparse file OK sending sparse file 418430220 bytes Waiting for answer... send sparse file OK SYSTEM partition update ...OK Extracting partition CUST... Cannot access to device 1/19/2021 10:13:07 PM Writing device finished - INCOMPLETE
Leave a comment:
-
oh, i am so sorry, i didn't connect the dots. May i please get another license extension so that i can try without rescue discovery option?Originally posted by Valdemaras View PostRescue recovery option should not be checked
Leave a comment:
-
Apparently, ane-l21 and ane-lx1 are the same device, i have tried flashing Anne-L21_8.0.0.108(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0.APP:
DC Phoenix 0.0.0.153
user:mihaifilat
Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: 89UDU18531006165
Standard update
Not Reboot NOT checkked
Update Verlist to server on file load NOT checked
Enable testpoint NOT checked
Disable testpoint NOT checked
Try Rescue Recovery checked
Bypass version check NOT checked
Old slow algo checked
Extracting recovery partition
Extracting partition: ERECOVERY_KERNEL
ERECOVERY_KERNEL partition extracted
Extracting partition: ERECOVERY_RAMDISK
ERECOVERY_RAMDISK partition extracted
Extracting partition: ERECOVERY_VENDOR
ERECOVERY_VENDOR partition extracted
1/15/2021 5:56:50 PM Starting to try Rescue Recovery...
Looking for a device in fastboot mode
Device found: 89UDU18531006165
Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...
Build number: :ANE-LX1 9.1.0.370(C432E7R1P7)
Model: ANE-LX1
Vendor/Country: hw/eu
Battery state: 3452mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: LOCKED
OEM get bootinfo:
locked
Getting base version...
Base Version: ANE-LGRP2-OVS 9.1.0.370
Getting cust version...
Cust Version: ANE-LX1-CUST 9.1.0.7(C432)
Getting preload version...
Preload Version: ANE-LX1-PRELOAD 9.1.0.7(C432R1)
Process identifier:29623162
Erasing ver .. .
Writing rescue_recovery_kernel partition
RESCUE_RECOVERY_KERNEL partition update :FAIL image verification error
Uptade recovery parttion FAIL
Cannot enter in Recovery mode
Leave a comment:
-
Where could i find the UPDATE.APP file. When i search from dc-phoneix i found Anne-L21_8.0.0.108(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0.APP. But my phone is ANE-LX1. Will this work?Leave a comment:
-
Okay, problem at the moment seems that your phone has no rescue recovery in it and board firmware doesn't contain such partition. So you need to flash normal UPDATE.APP firmware from fastboot with standard method selected on dc-phoenix and slow algo option checked. Let us know with results, may as well copy/paste here info from dc-phoenix for better view.Leave a comment:
-
oh, sorry i have now updated but flashing still fails. this is the log file form the latest(153) version https://drive.google.com/file/d/1nRa...ew?usp=sharingOriginally posted by Valdemaras View PostLeave a comment:
-
Just noticed that you are doing all this on old version of DC-phoenix, please try again on new one, meanwhile we will investigate the log file though it may be not what we neededsince it's from old version.Leave a comment:
-
ok, here is the link to the file https://drive.google.com/file/d/1lyo...ew?usp=sharingOriginally posted by Valdemaras View PostLeave a comment:
-
Ok will need to forward this to dev as this is most unusual:
Please do this:
1. Restart DC-Phoenix.
2. Press CTRL+L
3. Select firmware ANE-Full-Repair-NV-included-Board-A039-8.0.0.dgtks and flash from testpoint mode
4. After unsuccessful flashing close DC-phoenix
5. Open directory where DC-phoenix software is placed in
6. Look for .dgtkl file there, send it to me, please
If dev confirms there is no way and board dead, then will check for refund.
Leave a comment:
-
thanks for extending the license, i successfully flashed the kirin659_T0_V1 and V2 but the bootloader still appears to be locked.Originally posted by Valdemaras View Post
Oh, and about the battery, i misread and 3350mv is not normal since the battery specs say it should be 3820mvLeave a comment:
-
Okay, this seems to be a dead end using this method, i've extended your license, please try to use just loader, make sure bootloader is unlocked after it enters fastboot when using loader. Then you should attempt flash full stock rom in it.Leave a comment:
Leave a comment: