huawei eva-l09 frp erase start but fails

[alain1953]

Hello sir
I bought credits yesterday to unlock frp of my huawei eva-l09 (alain1953)

here are the logs of dc-unlocker2 client :


manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : FIG-LX1
Model : Huawei phone in fastboot mode
Serial NR. : XEDNW18721000483
Firmware : FIG-LX1 9.1.0.120(C432E5R1P3
FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 4286mv

================================================== =================

Factory reset protection Erase start

Fastboot command fail!

================================================== =================





I dont know what to do
I tried to set it up in manufacture mode with your special keycodes *#*#.........
but the phone says that it has to be unlocked first

[alain1953]

hello sir,

Do you think you will have a solution in the next future ?
Perhaps a new version of dc_unlocker2 client is in the works ?
because I saw that huawei eva-l09 is supported


Can I succeed somehow?

If it is not possible I would appreciate a refund.

thanks
alain1953

[Valdemaras]

You are using incorrect method to unlock it for your phone android version. https://www.dc-unlocker.com/dcphoeni...ate-or-fb-mode Credits were added back.

[alain1953]

Hello Sir,

Thanks for the credits.
This is what I get from DCPhoenix000153



Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

Build number: :FIG-LX1 9.1.0.120(C432E5R1P3)
Model: FIG-LX1
Vendor/Country: hw/eu
Battery state: 4252mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: LOCKED
OEM get bootinfo:
locked

Getting base version...
Base Version: FIG-LGRP2-OVS 9.1.0.120
Getting cust version...
Cust Version: FIG-LX1-CUST 9.1.0.5(C432)
Getting preload version...
Preload Version: FIG-LX1-PRELOAD 9.1.0.3(C432R1)
It seems that there is a big gap between phone version and version you want to write
We recommend to find another firmware file or try without file
Extracting recovery partition

Extracting partition: RECOVERY
RECOVERY partition extracted

2/18/2021 5:12:46 AM Starting to try Rescue Recovery...


Looking for a device in fastboot mode
Device found: XEDNW18721000483


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

Build number: :FIG-LX1 9.1.0.120(C432E5R1P3)
Model: FIG-LX1
Vendor/Country: hw/eu
Battery state: 4262mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: LOCKED
OEM get bootinfo:
locked

Getting base version...
Base Version: FIG-LGRP2-OVS 9.1.0.120
Getting cust version...
Cust Version: FIG-LX1-CUST 9.1.0.5(C432)
Getting preload version...
Preload Version: FIG-LX1-PRELOAD 9.1.0.3(C432R1)

Process identifier:30203464


Erasing ver .. .
Writing rescue_recovery partition
RESCUE_RECOVERY partition update :FAIL partition length get error
Uptade recovery parttion FAIL

Cannot enter in Recovery mode



What can I do ?
Thanks

[Valdemaras]

Are you sure you need google account removal or you are trying to change frp lock status in fastboot screen?

[alain1953]

Hello sir,

I want to remove google account , because
after a recovery of this second hand huawei, I pass three screens : language, conditions, wifi, and then I am stuck at google account

Yesterday I tried to downgrade to android 7 with your file
EVA-L09_C432B390_Firmware_France_Germany_Italy_Portuga l_Belgium_Spain_Switzerland_Netherlands_Nonspecifi c.APP
to no avail, as you can see above

Thanks

[alain1953]

Sorry, I just tried again this morning to pass the google account screen, and it worked
so I am happy to thank you

GOOD WORK GUYS

[Valdemaras]

Good news Did you do downgrade as you mentioned or completed without it?

[alain1953]

I suppose that your last program wrote something in a recovery partition
so when I tried to recover the phone , it was obliged to fetch new files with wifi , on internet
and that time I could boot withoutFRP