Problem

[mosonyi]

Hi There

I wanted to unbrick my p10, no luck. I could use only the 4credits bootloader unlock.
The huawei FRP erase didn't work (unfortunately I have no log from there).

Than I tried the phoenix, no luck either, here's the log

Or alternatively you could suggest something to unbrick my phone.

Thanks


---

DC Phoenix 0.0.0.158
user:mosonyi

Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: XXXXXXXXXXXXXXXXXXX


Advanced update
Not Reboot checked
Update Verlist to server on file load checked
Enable testpoint NOT checked
Disable testpoint NOT checked
Try Rescue Recovery checked
Bypass version check NOT checked
Old slow algo checked

Extracting recovery partition

Extracting partition: RECOVERY
RECOVERY partition extracted

3/10/2021 11:06:54 PM Starting to try Rescue Recovery...


Looking for a device in fastboot mode
Device found: XXXXXXXXXXXXX


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

Build number: :VTR-L09C432B126
Model: VTR-L09
Vendor/Country: hw/eu
Battery state: 4426mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

Getting base version...
Getting cust version...
Getting preload version...

Process identifier:30545334


Erasing ver .. .
Writing rescue_recovery partition
RESCUE_RECOVERY partition update :FAIL partition length get error
Update recovery parttion FAIL

Cannot enter in Recovery mode

[Valdemaras]

Using wrong solution. Need to use this: https://www.dc-unlocker.com/dcphoeni...ware-testpoint and then flash suitable firmware into device, preferable same android and customization to increase chances of repair.

[mosonyi]

I've tried this solution. Seemed to be working, but it when it reboots, can't get into recovery mode. Infinite loop...
Any other tip? Thanks

Erasing ver .. .
Writing rescue_recovery_kernel partition
RESCUE_RECOVERY_KERNEL partition update ...OK
Writing rescue_recovery_ramdisk partition
RESCUE_RECOVERY_RAMDISK partition update ...OK
Writing rescue_recovery_vendor partition
RESCUE_RECOVERY_VENDOR partition update ...OK
Update recovery parttion OK

USB Device REMOVAL
Type: @oem79.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&26139e45&0&1
Looking for device in upgrade mode...

USB Device INSERTION
Type: @oem79.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&26139e45&0&1
Process was cancelled by user
Enter recovery mode FAIL

Cannot enter in Recovery mode

[mosonyi]

I don't really know how and why, but I managed to unbrick my Huawei P10! Thanks for your help, of course, I don't need any refund! Keep up the good job! Thanks.

[mosonyi]

It seems it didn't work. The phone is bricked. can't even boot into fastboot. So I payed again to use dcphoenix.


The only thing I could do is, to use the disable testpoint function, but when I reboot I see only the error message:

Please advise (and extend) or refund. Thanks.

Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)

DC Phoenix 0.0.0.158
user:mosonyi

Device detected:
COM3: HUAWEI USB COM 1.0 (COM3)
BOOTLOADER selected to update:Kirin960_T2_A7.0_V4
4/4/2021 5:23:00 PM Starting to write device...

Process identifier:30919836

Validating file...

Writing bootloader...
Step 1...
Step 2...
Step 3...

Waiting for device REMOVAL/INSERTION...

Waiting for fastboot device...

USB Device REMOVAL
Type: @oem122.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&26139e45&0&1

USB Device INSERTION
Type: @oem41.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&26139e45&0&1
Device found: WPG7N17210008007


Looking for a device in fastboot mode
Device found: WPG7N17210008007


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:WPG7N17210008007
IMEI:861957032669565
IMEI1:861957032674656
Build number: :VTR-L09 9.1.0.275(C432E2R1P9)
Model: VTR-L09
Vendor/Country: hw/eu
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: RELOCKED
OEM get bootinfo:
unlocked

Software written
4/4/2021 5:23:52 PM Writing device finished OK

4/4/2021 5:23:52 PM Starting to write device in FASTBOOT mode...

Looking for a device in fastboot mode
Device found: WPG7N17210008007


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:WPG7N17210008007
IMEI:861957032669565
IMEI1:861957032674656
Build number: :VTR-L09 9.1.0.275(C432E2R1P9)
Model: VTR-L09
Vendor/Country: hw/eu
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: RELOCKED
OEM get bootinfo:
unlocked


Process identifier:30919867

Validating file...
Getting lock state info...
Getting ptable_lu3 parttion info...

Getting xloader parttion info...
XLOADER first block hash check success
XLOADER second block hash check success
XLOADER fastboot length check success
XLOADER third block hash check success
flash XLOADER. Trying to adjust XLOADER file length
Writing xloader partition
XLOADER partition update ...OK
Erasing MISC partition
Partition MISC erased

Erasing all ver .. .

USB Device REMOVAL
Type: @oem41.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&26139e45&0&1
Software written
4/4/2021 5:24:09 PM Writing device finished OK

[Valdemaras]

Disabling testpoint is using a service - refund not available.