Hi guys,
I have a Huawei E5180s-22 router customized by the ORANGE operator
MODEL: E5180s-22
IMEI: 864......................
HARDWARE: CL1E5180SM
S.O: 21.270.31.00.314
WEBUI: 16.100.03.00.03
I would like to have the original huawei software.
So what I would like is to flash the device to have the software without the operator layer.
After reading and searching a lot to get it you need the firmware among other things.
I have the following firmwares downloaded from https://firmware.gem-flash.com/index...older&id=16728
[FIRMWARES]
20150818.-.E5180s-22TCPU-V200R001B200D99SP03C00_Firmware_general_05021MHS
20180709.-.E5180s-22TCPU-V200R001B270D31SP04C55_Firmware_05015GDS
20180926.-.E5180s-22TCPU-V200R001B270D31SP02C1299_Firmware_05013DCG
20181011.-.E5180s-22TCPU-V200R001B270D35SP01C1409_Firmware_05013XCW
20181014.-.E5180s-22TCPU-V200R001B270D31SP01C26_Firmware_05013DCA
20181014.-.E5180s-22TCPU-V200R001B270D31SP01C104_Firmware_05013JGF
E5180s-22_B710C0update_21.200.99.04.00_Universal
E5180s-22_B710C0update_21.270.21.00.00_Universal
[TOOLS]
Huawei Router Tool
multicast-upgrade-tool-for-Huawei-LAN-port-routers
Balong_USB_Downloader_1.0.1.10
The question is how to put them in the router.
I have read that you need to use the Balong_USB_Downloader_1.0.1.10.7z software and something called usblsafe-e5180s.
To do all this you need to disassemble the router and use a USB cable connected with 4 cables: GND, TX, RX, 5V to some points on the board.
The issue is that I am not clear about the procedure ...
1.-.I get to have the cables connected to the board.
2.-.I try to upload the file usblsafe-e5180s with Balong_USB_Downloader_1.0.1.10.7z ...
3.-.Do I try to upload with Balong_USB_Downloader_1.0.1.10.7z any of the previously named firmwares?
With this I will get the original firmware from huawei?
What is the latest version that exists for this router?
Because I see that the last one I have downloaded is 21.270.21.00.00 and the one I have provided by the operator is 21.270.31.00.314
Thanks for all.
Juhn_Hoo
I have a Huawei E5180s-22 router customized by the ORANGE operator
MODEL: E5180s-22
IMEI: 864......................
HARDWARE: CL1E5180SM
S.O: 21.270.31.00.314
WEBUI: 16.100.03.00.03
I would like to have the original huawei software.
So what I would like is to flash the device to have the software without the operator layer.
After reading and searching a lot to get it you need the firmware among other things.
I have the following firmwares downloaded from https://firmware.gem-flash.com/index...older&id=16728
[FIRMWARES]
20150818.-.E5180s-22TCPU-V200R001B200D99SP03C00_Firmware_general_05021MHS
20180709.-.E5180s-22TCPU-V200R001B270D31SP04C55_Firmware_05015GDS
20180926.-.E5180s-22TCPU-V200R001B270D31SP02C1299_Firmware_05013DCG
20181011.-.E5180s-22TCPU-V200R001B270D35SP01C1409_Firmware_05013XCW
20181014.-.E5180s-22TCPU-V200R001B270D31SP01C26_Firmware_05013DCA
20181014.-.E5180s-22TCPU-V200R001B270D31SP01C104_Firmware_05013JGF
E5180s-22_B710C0update_21.200.99.04.00_Universal
E5180s-22_B710C0update_21.270.21.00.00_Universal
[TOOLS]
Huawei Router Tool
multicast-upgrade-tool-for-Huawei-LAN-port-routers
Balong_USB_Downloader_1.0.1.10
The question is how to put them in the router.
I have read that you need to use the Balong_USB_Downloader_1.0.1.10.7z software and something called usblsafe-e5180s.
To do all this you need to disassemble the router and use a USB cable connected with 4 cables: GND, TX, RX, 5V to some points on the board.
The issue is that I am not clear about the procedure ...
1.-.I get to have the cables connected to the board.
2.-.I try to upload the file usblsafe-e5180s with Balong_USB_Downloader_1.0.1.10.7z ...
3.-.Do I try to upload with Balong_USB_Downloader_1.0.1.10.7z any of the previously named firmwares?
With this I will get the original firmware from huawei?
What is the latest version that exists for this router?
Because I see that the last one I have downloaded is 21.270.21.00.00 and the one I have provided by the operator is 21.270.31.00.314
Thanks for all.
Juhn_Hoo
Comment