Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Huawei Y7 2019 (DUB-LX1) firmware write failed in Upgrade Mode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Huawei Y7 2019 (DUB-LX1) firmware write failed in Upgrade Mode

    I write board firmware of Huawei Y7 209 (DUB-LX1) and repaired successfully imei/country via HCU client.
    But this is failed to write official firmware in Upgrade Mode With/Without Rescue Recovery mode.
    Even write official firmware via Fastboot but failed to write firmware in Upgrade Mode.

    Screenshot-229.png

    Screenshot-233.png

    Here is Log

    Code:
    DC Phoenix 0.0.0.164
    user:0365303F2C
    
    Looking for a device in upgrade mode
    No devices detected in upgrade mode
    Device found: 58KRX19308026028
    
    
    Standard update
    Not Reboot NOT checked
    Update Verlist to server on file load NOT checked
    Enable testpoint NOT checked
    Disable testpoint NOT checked
    Try Rescue Recovery NOT checked
    Bypass version check NOT checked
    Old slow algo NOT checked
    
    
    06/11/2021 10:01:00 PM Starting to write device in FASTBOOT mode...
    
    
    Looking for a device in fastboot mode
    Device found: 58KRX19308026028
    
    
    Getting IMEI...
    Getting build number...
    Getting model ...
    Getting battery state...
    Getting backdoor info...
    Getting lock state info...
    Getting lock boot info...
    
    Build number: System 8.2.0.036(04A0)
    Device model: Device model: DUB-LX1
    Vendor/Country: hw/meafnaf
    Battery state: 3851mv
    OEM lock state info:
    user Lock state is lock
    
    fbLock state is lock
    
    OEM get bootinfo:
    *******************************************
    
    Image is origin
    
    Verify mode is enforcing
    
    Check root info is safe
    
    Lock state is lock
    
    Root State: UNROOT
    
    *******************************************
    
    
    File size: 3,820,884,512 bytes
    AMSS version: DUB-L22 8.2.0.172(C900)
    
    Process identifier:35770058
    
    Validating file...
    
    Erasing ver .. .
    Getting lock state info...
    Getting backdoor info...
    Cannot get FBlock info from device
    Trying to unlock device...
    
    Signing process may take few minutes
    
    Trying to get data from server
    Cannot get FBlock info from device
    
    Signing process may take few minutes
    
    Trying to get data from server
    Cannot get FBlock info from device
    
    Signing process may take few minutes
    
    Trying to get data from server
    Waiting in queue for signing service. Expected time 1 second(s) to get data from server
    
    Trying to get data from server
    Cannot get FBlock info from device
    
    Signing process may take few minutes
    
    Trying to get data from server
    Unlock process finished successfully
    
    
    Erasing ver .. .
    
    Writing GPT partition
    PTABLE partition update :FAIL partition table doesn't exist
    
    Writing RPM partition
    RPM partition update ...OK
    
    Writing TZ partition
    TZ partition update ...OK
    
    Writing SBL1 partition
    SBL1 partition update ...OK
    
    Writing APDP partition
    APDP partition update ...OK
    
    Writing MSADP partition
    MSADP partition update ...OK
    
    Writing KEYMASTER partition
    KEYMASTER partition update ...OK
    
    Writing DEVCFG partition
    DEVCFG partition update ...OK
    
    Writing ABOOT partition
    ABOOT partition update ...OK
    
    Writing MODEM partition
    MODEM partition update ...OK
    
    Writing KERNEL partition
    KERNEL partition update ...OK
    
    Writing RAMDISK partition
    RAMDISK partition update ...OK
    
    Writing RECOVERY_RAMDISK partition
    RECOVERY_RAMDISK partition update ...OK
    
    Writing RECOVERY_VENDOR partition
    RECOVERY_VENDOR partition update ...OK
    
    Writing ERECOVERY_KERNEL partition
    ERECOVERY_KERNEL partition update ...OK
    
    Writing ERECOVERY_RAMDISK partition
    ERECOVERY_RAMDISK partition update ...OK
    
    Writing ERECOVERY_VENDOR partition
    ERECOVERY_VENDOR partition update ...OK
    
    Erasing SYSTEM partition
    Partition SYSTEM erased
    Writing SYSTEM partition
    sending sparse file 534744004 bytes
    Waiting for answer...
    send sparse file OK
    sending sparse file 485496544 bytes
    Waiting for answer...
    send sparse file OK
    sending sparse file 534615032 bytes
    Waiting for answer...
    send sparse file OK
    sending sparse file 534320320 bytes
    Waiting for answer...
    send sparse file OK
    sending sparse file 534524860 bytes
    Waiting for answer...
    send sparse file OK
    sending sparse file 203959600 bytes
    Waiting for answer...
    send sparse file OK
    SYSTEM partition update ...OK
    
    Erasing CACHE partition
    Partition CACHE erased
    Writing CACHE partition
    CACHE partition update ...OK
    
    Erasing ODM partition
    Partition ODM erased
    Writing ODM partition
    ODM partition update ...OK
    
    Erasing USERDATA partition
    Partition USERDATA erased
    Writing USERDATA partition
    USERDATA partition update ...OK
    
    Software written
    06/11/2021 10:04:20 PM Writing device finished - INCOMPLETE
    
    Waiting for fastboot device...
    
    USB Device REMOVAL
    Type: @oem147.inf,%hwfastboot%;Android Sooner Single ADB Interface
    VidPid: VID_18D1&PID_D00D
    Instance id: 58KRX19308026028
    
    USB Device INSERTION
    Type: @oem147.inf,%hwfastboot%;Android Sooner Single ADB Interface
    VidPid: VID_18D1&PID_D00D
    Instance id: 58KRX19308026028
    Device found: 58KRX19308026028
    
    File size: 3,820,884,512 bytes
    AMSS version: DUB-L22 8.2.0.172(C900)
    Writing rescue_recovery_kernel partition
    RESCUE_RECOVERY_KERNEL partition update ...OK
    Writing rescue_recovery_ramdisk partition
    RESCUE_RECOVERY_RAMDISK partition update ...OK
    Writing rescue_recovery_vendor partition
    RESCUE_RECOVERY_VENDOR partition update ...OK
    Update recovery parttion OK
    Looking for device in upgrade mode...
    
    USB Device REMOVAL
    Type: @oem147.inf,%hwfastboot%;Android Sooner Single ADB Interface
    VidPid: VID_18D1&PID_D00D
    Instance id: 58KRX19308026028
    
    USB Device INSERTION
    Type: @oem180.inf,%busfilter.devicedesc%;USB Composite Device
    VidPid: VID_12D1&PID_107D
    Instance id: 58KRX19308026028
    Process was cancelled by user
    Enter recovery mode OK
    
    06/11/2021 10:06:20 PM Starting to write device in UPGRADE mode...
    Cannot detect device, try again
    
    We recommend to repeat the update from fastboot mode with Version check bypass and rescue recovery options checked
    
    06/11/2021 10:06:31 PM Writing device finished with ERROR

  • #2
    Doesn't seem that the device is detected for flash in update mode, what do you see in the device manager when it enters USB update mode, also it must have the battery inside and charged up for this to work.
    >>Free Octohide VPN for Android, find it on Google Play Here<<

    Comment


    • #3
      Originally posted by Valdemaras View Post
      Doesn't seem that the device is detected for flash in update mode, what do you see in the device manager when it enters USB update mode, also it must have the battery inside and charged up for this to work.
      After select option Rescue Recovery, then driver appear same like as below in Device Manager.

      Screenshot (229).png

      And without Rescue Recovery as below ....

      Screenshot (230).png

      I tried many different drivers version but result was the same......

      FAILED

      Screenshot (232).png
      Last edited by hafiz4saqib; 2021-11-08, 07:18 PM.

      Comment


      • #4
        Maybe hisuite launched automatically and runs in the background after the mode switch, it does this sometimes, in which case you need to shut it completely down and then retry the process.
        >>Free Octohide VPN for Android, find it on Google Play Here<<

        Comment


        • #5
          Originally posted by Valdemaras View Post
          Maybe hisuite launched automatically and runs in the background after the mode switch, it does this sometimes, in which case you need to shut it completely down and then retry the process.
          I already done below settings and also I am confirm that there is no any sign of HiSuite working in background.

          Screenshot (1).png

          Comment


          • #6
            Then no way as per DC-phoenix support models and features table for this unit: https://www.dc-unlocker.com/supportedmodelsdcpx.php Can only try then probably flash stock rom files from sd card.
            >>Free Octohide VPN for Android, find it on Google Play Here<<

            Comment

            Working...
            X