Huawei E3372 - Please define proper COM port, or select autodetect!

[dontoron]

I'm using DC- Unlocker 2 Client v1.00.1441 (12.07.2022)

Connecting my Huawei E3372 (without simcard)

Starting DC- Unlocker 2 Client, clicking Detect modem.

It detects:
Interface : 192.168.*.*
Found modem : E3372h-320
Model : Huawei E3372 / MTC 827F
IMEI : 8**************
Serial NR. : VQN7S20513002357
Firmware : 10.0.3.1(H192SP1C983)
Hardware ver. : C*********
Web UI version : WEBUI 10.0.3.1(W13SP2C7110)
SIM Lock status : unknown(read failed)



I enter this command:
AT^DATALOCK="12345678"

And getting this: Please define proper COM port, or select autodetect!


What did I wrong?

[Valdemaras]

The device should be detected with sim card inside. Lock status is incorrectly read currently.

[dontoron]

The device should be detected with sim card inside. Lock status is incorrectly read currently.

Insert sim card. Entered the command and getting this now:
"Select an Application or Modem COM Port!"

[Valdemaras]

Then you should check with sources about AT commands if your device's version can accept them as we do not provide such information.