Unlock bootloader Mate 20X 5G EVR-N29

[zjapam]

This is the lowest Android for the device.
The device is on the list of devices that can be unlocked.
I wouldn't purchase the license if it is impossible.
I would like a refund.

[Valdemaras]

Nothing else is necessary only the lowest Android available for it as for any Kirin980 CPU-based mobile.

[zjapam]

It is Android 9.0.
What else should I install to get it unlocked?

[Valdemaras]

If bootloader remains locked then only thing that can cause it is Android version being too high.

[zjapam]

I already uploaded the fastboot screen after unlocking it. Here is the log test (the same as in the picture.) 20240608_191707_HCU_XloaderRepair_270C021BA7F6228.txt

[Valdemaras]

What about Mate 20X 5G EVR-N29 then?
It is Android 9, being connected properly (hardware testpoint), done as instructed properly, the log said it's unlocked but still locked.
Is there anything wrong with my procedure?
Did I miss something?

Do you have the process log from the software as previously? As well as a picture of the fast boot screen of the phone after unlock has been done?

[zjapam]

What about Mate 20X 5G EVR-N29 then?
It is Android 9, being connected properly (hardware testpoint), done as instructed properly, the log said it's unlocked but still locked.
Is there anything wrong with my procedure?
Did I miss something?

[Vincentas]

Unfortunately, rewriting vendor and country and model by using our software will not work if android version 10 or higher. This is clearly written on instructions and on service list.
We can not assist you regarding Magisk because it is not our software. Also, we do not have service or information regarding this model downgrade.

[zjapam]

I have been trying to unlock the bootloader of Huawei Mate 20X phones.
I have Mate 20X(EVR-AL00) and Mate 20X 5G(EVR-N29).
First I bought an EVR-N29 and attempted to unlock the bootloader but failed.
So I thought something was wrong with this device to unlock the bootloader then I purchased another Mate 20X(EVR-AL00) just to get the model rooted.
Unfortunately, this phone also was unable to be unlocked, end up having two locked Mate 20X.
The exact model specs and procedure I took are as follows.

1.Mate 20X 5G
EVR-N29
Android 9
EMUI 9.11
9.1.1.188(C636E2)

2.Mate 20X(EVR-AL00)
EVR-AL00
Android 10
EMUI 10.0.0
10.0.0.188(C00E74R2P8)

First and foremost I could not recognize the devices with DCPhoenix v164, v170, and v174 (the DCPhoenixes freeze forever in the process of "Looking for devices by ports").
So I used DCPhoenix v158 which successfully recognized the devices.
And somehow I could not enable software testpoint on both devices. (even EVR-N29 which is installed on Android 9)
So I connect them to the PC with Hardware testpoint mode.

As for EVR-N29, I could
1. Succecefuly downgrade to Android 9
2. Succecefuly connect the PC with hardware testpoint mode
3. Unlock the bootloader in HCU where the log of the process describes that it is unlocked successfully.

But when I reboot the devices to bootloader mode to check the device is unlocked, it says the lock status is locked.
And I failed to install Magisk to get the device rooted.

s-スクリーンショット 2024-06-08 191415.jpg s-スクリーンショット 2024-06-08 191942.jpg
s-IMG_20240714_184716.jpg


As for EVR-AL00,
First and foremost It could not be recognized with a normal USB cable so I connected it with a Harmony TP Cable.
And I failed to downgrade the device to Android 9 by HiSuite.Proxy with every Android 9 stock roms that I could find on the internet. (Probably because of the mismatch of vendor and country)
So I attempted to forcefully downgrade the device by rewriting vendor, country, and model using HCU/DCPhoenix since the device needs to be on Android 9 to make the bootloader unlocked. (Am I correct?)
But they failed to read the partition and oem info in the process of rewriting.

The log is following:

---

24/06/16 13:28:15
HCU Client v1.0.0.0382
Account: zjapam

Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports


Repair
New Model : EVR-L29
New Vendor : hw
New Country : eu
New FB User Lock : UNLOCKED
Unlock downgrade/customization limitations
Reboot after repair
Selected Cpu/Bootloader - Kirin980_P1_V3
2024-06-16 13:28:15.626 Connecting to server...
2024-06-16 13:28:16.288 Connected!
2024-06-16 13:28:17.081 Find device COM51, handle 10808
BOOTLOADER selected to update:Kirin980_P1_V3
downloading file Kirin980_P1_V3_0.dtwork...
downloading file Kirin980_P1_V3_2.dtwork...
downloading file Kirin980_P1_V3_3.dtwork...
downloading file Kirin980_P1_V3_4.dtwork...
downloading file Kirin980_P1_V3_6.dtwork...
2024-06-16 13:29:48.325 Waiting for device REMOVAL/INSERTION...
2024-06-16 13:29:55.183 Device ready!
2024-06-16 13:29:55.199 Connecting to server...
2024-06-16 13:29:55.877 Connected!
2024-06-16 13:29:57.105 Unlocking bootloader...
2024-06-16 13:29:57.123 Reading Certify data...
2024-06-16 13:29:57.961 Reading Certify data success!
2024-06-16 13:29:57.974 Signing Certify data...
2024-06-16 13:29:59.283 Reading info...
2024-06-16 13:30:06.618 Read oeminfo FAIL!
2024-06-16 13:30:06.630 Read partition fail!

Fastboot provided info:
CPU: kirin980
Model: EVR-AL00
Firmware: EVR-AL00 10.1.0.167(C00E167R2P8)
Vendor: all
Country: cn
SN: GCQ5T18B02007106
PCB SN: 5T5QXE18B3005058
WIFI MAC: 342EB6418D7A
Theme color: black
Device color: phantom
FBLOCK: 1
Bootloader FB lock: unlocked
Bootloader User lock: locked

Found signed IMEI:
Key: 0x6000
IMEI1: 866202049661791
IMEI2: 866202049805950
IMEI3: 866554040003971
SIM NW_LOCK status: UNLOCKED
2024-06-16 13:30:06.898 Read partition fail!

---

What else can I do to unlock the bootloader of the devices?
You said Mate 20X can be unlocked.
Since I have consumed so much money and time, I would like a refund if it is impossible.
Thank you,