Huawei E585 Not Connecting to other networks

[hellfires]

Hi,

I Have just run the unlock software and it says the simlock has been removed,


DC - Unlocker 2 Client 1.00.0575

Detecting card :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Model : Huawei E585
IMEI :
Serial NR. : M7A4CA1092803066
Firmware : 1026.11.64.18.505sp01
Compile date / time : Sep 6 2010 12:02:06
Dashboard version : ConnLaucher_WIN1.01.01.156_MAC1.01.02.156
Chipset : Qualcomm MSM7625A
SIM Lock status : unlocked

I have setup the correct APN for 3 different networks but it just stays on No Network screen message, with all 3 different sims it says SIM Lock Status as unlocked.

If I put the orignal sim back in it connect after reseting the E585.

Any help would be great.

[Vincentas]

Could you write device imei number? Does it accept other provider sim? Or write message sim incorrect?

[hellfires]

DC - Unlocker 2 Client 1.00.0575

Detecting card :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Model : Huawei E585
IMEI : 352398041406978
Serial NR. : M7A4CA1092803066
Firmware : 1026.11.64.18.505sp01
Compile date / time : Sep 6 2010 12:02:06
Dashboard version : ConnLaucher_WIN1.01.01.156_MAC1.01.02.156
Chipset : Qualcomm MSM7625A
SIM Lock status : unlocked

It doesn`t give incorrect sim message, the only message I get is no network

[hellfires]

I just tryed my 3 sim and can not connect on that either, I put it into another 3 usb moden and it connects fine. so what ever the unlock does it seems to have messed up the modem, i have tryed reseting the modem and still no connection even with the original sim card

[Vincentas]

I just tryed my 3 sim and can not connect on that either, I put it into another 3 usb moden and it connects fine. so what ever the unlock does it seems to have messed up the modem, i have tryed reseting the modem and still no connection even with the original sim card

What country is device from? Also try to open router web panel and check the settings there. If device accept sim card means itis unlocked.

[hellfires]

the device is fronm the UK, i could open the web control pannel and see the settings were correct but it would not connect to any network, it said unlocked and didn`t give any error message when another sim is put in.

[hellfires]

it is on the newer firmware 505sp01 that seems to be causing alot of prblems unlocking.

[Vincentas]

it is on the newer firmware 505sp01 that seems to be causing alot of prblems unlocking.

Many device with this firmware are unlocked. Also, unlock only reads the unlock code, so it can not do anything to your mode. If device accept sim crds, then it is unlocked for sure.
What city are you from? We will cehck, maybe someone from our reseller or any other people using our product are near you and would be able to try to help you.

[wrtease5865]

in the web browser i had to change settings to 3g prefferred rather than 3g only maybe help hellfires problem.hope to help as i did this to my e585 from uk.p.s this forum is 100% brillaint.and happy new yer .

[hellfires]

Thanks for the help and suggestions but I was unable to get it working,
I got the e585 replaced at the 3 store and phone 3, they are sending me a new unlocked e585 as swop out and i only had to pay them £15 to get an unlocked replacement.Happy New Year

[irelandnewbie]

How to set 3G preferred

My problem is similar to this thread. I've had the device unlocked (orig from 3 networks) and it works fine with the 3 sim. But when I out in another sim, it just connects and then disconnects. Over and over.

I read a reply here where I should just set it to 3G preferred. I see where to do this but it gives me an error that a connection is already established. When I try to do this without a sim, the Network Settings are is greyed out.

So how can I set this setting?

Thanks much for the help. I want to make sure the device is truly unlocked.

[wrtease5865]

do the settings on web interface .then try with other sims to see what happens. web interface will help you .

[irelandnewbie]

I did the settings on the web interface but it still tells me that I can't change this setting since a connection has already been established.

Exact message:

Applying

The errors that occurred in the process of modifying the settings of the Mobile Wi-Fi will be displayed on this page.

The connection has been established. You cannot change network settings.

Wait for 3 seconds, and then click Continue, or you can refresh this page.


Any help? Thanks.