Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Failed to make voice calls (in/out)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Failed to make voice calls (in/out)

    Hi gurus

    Here is the output of DC Unlocker:-

    manufacturer - Huawei datacards
    model - Auto detect

    Found modem : K3715
    Model : Huawei K3715
    IMEI : 353**********
    Firmware : 11.113.03.00.00
    Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
    Serial NR. : DH5TAB2913004947
    SIM Lock status : unlocked
    Voice feature : enabled
    Wrong codes entered : 0 (unlock attempts left : 10)

    Mobile Partner has been installed successfully (version 11.302.09.01.539)

    Everything is OK except making voice calls

    It is strange that calls (inbound/outbound) were made but hung up automatically ...

    Please help

    Thank you

  • #2
    Try to use this connection manager: http://www.dc-unlocker.com/downloads/get/LihV26NW

    Comment


    • #3
      Originally posted by Vincentas View Post
      Try to use this connection manager: http://www.dc-unlocker.com/downloads/get/LihV26NW
      Hi Vincentas

      I found the version (i.e. 11.302.09.01.539) in the said link was same as what I had installed

      BTW, this version of Mobile Partner was downloaded and installed ...

      However, the problem still re-occur when inbound/outbound calls were made, i.e. voice calls could be made but hung up at once automatically

      Your help is appreciated ...

      Comment


      • #4
        Originally posted by karlcchu View Post
        Hi Vincentas

        I found the version (i.e. 11.302.09.01.539) in the said link was same as what I had installed

        BTW, this version of Mobile Partner was downloaded and installed ...

        However, the problem still re-occur when inbound/outbound calls were made, i.e. voice calls could be made but hung up at once automatically

        Your help is appreciated ...
        Try updating to other firmware. Maybe this will help.

        Comment


        • #5
          Still, the result was same after upgrading the firmware (i.e. the version 11.113.03.00.00) ...

          Comment

          Working...
          X