Ideos X3 (U8510) need help

[leosmutter]

Hi

I got an Ideos X3 (U8510) with O2 netlock. Dc-unlocker detects as "fastboot 0.5" and product "swordfish". After that unlocker is stuck. Is there any more info or help i can provide to add this model?

TAC 35719104

leosmutter

[Gintas]

Hi

I got an Ideos X3 (U8510) with O2 netlock. Dc-unlocker detects as "fastboot 0.5" and product "swordfish". After that unlocker is stuck. Is there any more info or help i can provide to add this model?

TAC 35719104

leosmutter

We have similar phone with us which acts the same "swordfish". We need to work further on it to make supported to unlock with DC-Unlocker.
Do not know the time exactly when it will be finished.

[rosta01]

anything changed with this "swordfish" type?
I have this one and can't unlock. Drivers installed (in device manager is Android Sooner Single ADB Interface), using DC-Unlocker 1.00.0890 and get this

DC - Unlocker 2 Client 1.00.0890

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Fastboot version    : 0.5
Product             : swordfish

and after info to press Vol - have this

Phone not found !

any help
BR

[Gintas]

anything changed with this "swordfish" type?
I have this one and can't unlock. Drivers installed (in device manager is Android Sooner Single ADB Interface), using DC-Unlocker 1.00.0890 and get this

DC - Unlocker 2 Client 1.00.0890

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Fastboot version    : 0.5
Product             : swordfish

and after info to press Vol - have this

Phone not found !

any help
BR

Do you hold the Vol- button pressed long enough? You must hold it nearly for a minute.
Also, what drivers did you install? The ones that are provided in our procedure? Did you install drivers by following driver installation procedure?

[rosta01]

Do you hold the Vol- button pressed long enough? You must hold it nearly for a minute.
Also, what drivers did you install? The ones that are provided in our procedure? Did you install drivers by following driver installation procedure?

Drivers installed from instructions "Pulse_2.1_XP_Drivers"
"Vol -" holding untill info "Phone not found"

[Gintas]

Drivers installed from instructions "Pulse_2.1_XP_Drivers"
"Vol -" holding untill info "Phone not found"

Could you try to reinstall drivers?
Or maybe other USB port? Or other computer?
Make sure phone is not connected thorugh any USB hubs - it must be connected directly to motherboard.
Also, try to remove battery for 20 seconds, place it back and repeat unlock procedure.

[rosta01]

Could you try to reinstall drivers?
Or maybe other USB port? Or other computer?
Make sure phone is not connected thorugh any USB hubs - it must be connected directly to motherboard.
Also, try to remove battery for 20 seconds, place it back and repeat unlock procedure.

I tried all procedure on two other PC. On both of them after this

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Fastboot version    : 0.5
Product             : swordfish

is info about "Vol-" and get this

Disk write error !

Phone connected direct to PC
Tried also with ver 1.00.0805 but the same as above

[Gintas]

Try with latest: http://www.dc-unlocker.com/downloads/get/6Ua20gVI

Maybe your phone is damaged in some way?

[rosta01]

Try with latest: http://www.dc-unlocker.com/downloads/get/6Ua20gVI

Maybe your phone is damaged in some way?

all time I'm working on 0890, I just tried one time on ver 0805
phone looks like new

[rosta01]

hehe I don't know how to explain this ...
I tried on fourth PC but with Win 7 64bit. I did exactly the same steps as before and.... phone unlocked without problem
Thanks
BR