Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Canīt unlock MC8775

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Canīt unlock MC8775

    DC - Unlocker 2 Client 1.00.0416

    Detecting card :

    selection :
    manufacturer - SierraWireless
    model - Auto detect

    Found modem : MC8775
    Model : MC8775/MC8775V
    IMEI : 352905014216984
    Firmware : H2_0_8_19MCAP
    Serial NR. : D61180811501157
    SIM Lock status : Locked (PH-NET PIN)
    Voice feature : disabled

    ================================================== =================

    User : jav052
    Password : OK !
    Credits left : 15

    ================================================== =================

    Unlocking, please wait ...


    Error connecting to server !

    (error code 62)

  • #2
    This error is error connecting to server. Server is working. Maybe something is blocking from your side. Maybe firewall or other software. Be sure you have internet connection at unlock time. Try to use other internet connection type or other computer.

    Comment


    • #3
      I have tested with three Internet connections.The result is the same error 62.
      I have tested with three different portable. The result is the same error 62.
      There is no firewall enabled.
      The process of unlocking starts but when it has completed approximately 80% fails.
      The process is slow, very slow. Place approximately 15 to 20 minutes.

      The card is HP hs2300. I use the drivers from HP.

      Thanks

      Comment


      • #4
        Could you write ip address that you use? What type of connection you use at unlock? Maybe other modem?

        Comment


        • #5
          The IP address is dynamic. I use two ADSL lines and a 3G line.

          At this time my ip address is:
          87.223.186.93 line 1.
          95.18.248.150 line 2.

          With all these lines does not work.

          Comment


          • #6
            Try to use only ADSL line. Disconnect 3G line. Then try connect to server.
            Here is no block and server is working. Something is blocking from your side. Maybe firewall or other software.
            Be sure no scanning, sharring, monitoring software is running.

            Comment


            • #7
              I do not use all the lines at the same time, of course.
              I do not have any active firewal.
              I do not have any kind of software that controls the connection.

              Is it normal that takes twenty minutes to do 80% of the process?

              It is impossible to fail three lines of different communications.
              It is impossible to fail three different computers.

              I have not used my 15 credits. If you can not unlock the modem, I do not need the credits.

              Comment


              • #8
                Sorry, only new saw there may be problem in dc-unlocker software. Till today evening we should have a new dc-unlocker software version to try. I will send you a private massage with link when will have it.

                Comment


                • #9
                  Private message with link to dc-unlocker beta software sent. Could you try it and write the result? Thank you in advance. Sorry for delay.

                  Comment

                  Working...
                  X