[Problem] With "ZTE MF628" - DC-Unlocker not detect

[PedroPedroPedro]

DC - Unlocker 2 Client 1.00.1005

Detecting modem :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)


modem not found !


I already tried any times but the software don't detect my ZTE MF628. Why?

[Valdemaras]

If you can not detect modem, check this:
Make sure all drivers are installed.
Make sure modems connection software is installed, but not running. (if there is one)
Use Autodetect on dc-unlocker “select model” line.
Make sure modem is not connected to internet.

Also use latest dc-unlocker software - https://www.dc-unlocker.com/downloads/get/55aeaQfd

[PedroPedroPedro]

I have it all! Everything's Okay...

But before that I tried to unlock through this system: http://masterichax.blogspot.pt/2010/...ock-modem.html (KPN USB-Modem Updater) but appears always the next message: "Line fail£ please reset the modem manually" Did I blew the modem? Exist more people with this problem!

[Valdemaras]

I have it all! Everything's Okay...

But before that I tried to unlock through this system: http://masterichax.blogspot.pt/2010/...ock-modem.html (KPN USB-Modem Updater) but appears always the next message: "Line fail£ please reset the modem manually" Did I blew the modem? Exist more people with this problem!

As i'm not aware of other tools there is a possibility that you've damaged your device. Does it work? Can you see your device in device manager, if so please tell us under what lines it appears.

[PedroPedroPedro]

The modem appears on the COM and LPT category of devices.

And now? =S

[Valdemaras]

Spread modems link in device manager, right click on your modem there, select properties, navigate to modems tab and see what com port it shows there. This will be your application port number. Under ports line see diagnostics port number. Now select manually model from select model line and enter those com port numbers to respective fields, try to detect your device then.