ZTE MF90 4G not supported

[Valdemaras]

filed fields manually - it's the same as auto detect setting - did every thing including removing the battery 20 seconds but it's still not working !

is it possible to use original modem firmware if we can find it ?

What do you mean, you have changed firmware of it? If disabling diagnostics port did not help that way you might want to try hyperterminal software and try to disable this port from it.

[abo-sultan]

filed fields manually - it's the same as auto detect setting - did every thing including removing the battery 20 seconds but it's still not working !

is it possible to use original modem firmware if we can find it ?

[Valdemaras]

typed "AT+ZCDRUN=F" pressed Enter but nothing happened ,restarted and reconnected device still the same problem

Go to device manager, locate mf90 under modems line there. Right click on it and select properties, then open modems tab and check what COM port it shows there. See under Ports line what COM port is showed next to diagnostics interface of your device. After it open dc-unlocker select manufacturer and select model manually. Fill in port numbers that you have located by steps provided Application port is one that was shown under Modems line, Diagnostics one under Ports. Then detect it. After it try to Dosable diagnostics port from unlocking tab and right after it write in that AT command and hit enter, then try to reconnect device to pc and check if its still same.

[abo-sultan]

typed "AT+ZCDRUN=F" pressed Enter but nothing happened ,restarted and reconnected device still the same problem

[Valdemaras]

did not help !
displays this "no response ! "

Try to detect device again and in white area of the program under detection info type this at command - AT+ZCDRUN=F and hit Enter. Then restart/reconnect device.

[abo-sultan]

Try to detect device by dc-unlocker and in unlocking tab click disable diagnostics port button, then reconnect device to pc, see if it helped.

did not help !
displays this "no response ! "

[Valdemaras]

great modem unlocked, but now with the drivers i can't connect thru USB !!
any solutions ?

dose the Zain version support both 1800mhz and 2300mhz frequencies ?

Try to detect device by dc-unlocker and in unlocking tab click disable diagnostics port button, then reconnect device to pc, see if it helped.

[abo-sultan]

great modem unlocked, but now with the drivers i can't connect thru USB !!
any solutions ?

dose the Zain version support both 1800mhz and 2300mhz frequencies ?

[Valdemaras]

Drivers for MF90 available here - https://files.dc-unlocker.com/backen...5DDF50B9026C68

[sw2002ws]

Sorry, forgot link

https://anonfiles.com/file/e26fabab77ab7a992cf57340fa439f7d

[sw2002ws]

thanks alot sw2002ws for ur help this file i think u took it from your modem before the setup

when u make auto run the file speed 4g mobile wifi router will be direct to c/ program files if u could upload the whole fine i will be thankfull for ur becuse i am trying from last week to install it but the problem zain telcome locked the usb in some way i tried hacked once and its almost work but i lost the driver again so please try to upload it we may solve it soon and unlock it

i attach apicture for mf 91 as an examble but i dont have its modem


regards bro

Hi
I uploaded all of files after install it,That is what you mean?
And my Router is locked in (Zain-KSA), like you.

[eidooo]

file after install up

Hi

I have this modem, and I attached the driver and software in this link:
http://www.megafileupload.com/en/fil...-MF90-rar.html

thanks alot sw2002ws for ur help this file i think u took it from your modem before the setup

when u make auto run the file speed 4g mobile wifi router will be direct to c/ program files if u could upload the whole fine i will be thankfull for ur becuse i am trying from last week to install it but the problem zain telcome locked the usb in some way i tried hacked once and its almost work but i lost the driver again so please try to upload it we may solve it soon and unlock it

i attach apicture for mf 91 as an examble but i dont have its modem


regards bro

[3beed616]

Device appears under ports line with 3 lines there with a "!" mark, yes? I so, please try this. Extract that same file that you've uploaded/provided for others. Now open a device manager and right click on on of those 3 lines that appears under ports. Select update drivers and locate directory manually of the extracted folder Driver -> data -> drivers (and choose folder with appropriate bits of your windows os) try to update them this way. Maybe then it will appear correctly.

I already try this way but it didn't work

[3beed616]

Hi

I have this modem, and I attached the driver and software in this link:
http://www.megafileupload.com/en/fil...-MF90-rar.html

thanks for the help , I already got this at the first time I connect the mf90 to computer but it didn't help.

[Valdemaras]

I think No, if you find way to unlock it tell us please...
ya 7lo.

Device appears under ports line with 3 lines there with a "!" mark, yes? I so, please try this. Extract that same file that you've uploaded/provided for others. Now open a device manager and right click on on of those 3 lines that appears under ports. Select update drivers and locate directory manually of the extracted folder Driver -> data -> drivers (and choose folder with appropriate bits of your windows os) try to update them this way. Maybe then it will appear correctly.