MF60 not opening dashboard

[ruyzalim]

Hello , i never managed to open dashboard of mf60 after unlock
so i try http://m.home/ http://192.168.0.1 http://192.168.1.1

http://ufi.home

and nothing works please help me

[Valdemaras]

Hello , i never managed to open dashboard of mf60 after unlock
so i try http://m.home/ http://192.168.0.1 http://192.168.1.1

http://ufi.home

and nothing works please help me

You sure, that it is correct address for accessing it? There should be full instructions for how to access devices web panel on its manual. Also if you still can detect mf60 on dc-unlocker go to unlocking tab and click disable disagnostics port, then restart device and check again if you still can not access it.

[ruyzalim]

You sure, that it is correct address for accessing it? There should be full instructions for how to access devices web panel on its manual. Also if you still can detect mf60 on dc-unlocker go to unlocking tab and click disable disagnostics port, then restart device and check again if you still can not access it.

Still no access i need to configure my mf60

[Valdemaras]

Still no access i need to configure my mf60

What answer you got when you disabled diagnostics port? Was it positive?

[ruyzalim]

What answer you got when you disabled diagnostics port? Was it positive?

yes , now i try to enavle it again and say port not available

[ruyzalim]

DC - Unlocker 2 Client 1.00.1074

Detecting modem :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)

Enabling ZTE modem driver... OK
Waiting for ZTE modem...

Found Applications port COM15
Found Diagnostics port COM14

Found modem : MF60
Model : ZTE MF60
IMEI : 355572046822812
Firmware : BD_BPUKMF60V1.0.1B02
Compile date / time : Jun 13 2012 12:55:51
Chipset : Qualcomm MSM8200A
Voice feature : unknown(read failed)
SIM Lock status : unlocked

================================================== =================

Disabling ZTE diagnostic port ... OK

Restarting modem ... OK

Diagnostic port disabled !

[ruyzalim]

Thank you problem solved

[pisces87]

Thank you problem solved

how you solved your problem sir? i had also here mf60 same in your problem. can i know what you did?

[Valdemaras]

how you solved your problem sir? i had also here mf60 same in your problem. can i know what you did?

Disable diagnostics port after you detect device on dc-unlocker from Unlocking tab.

[lansefengyu]

I can help you to deal with it.Send you it's dashboard or flash it.