R206Z Unlock issue

[darker]

Hello Support Team

I bought yesterday credits and downloaded dc-unlocker to unlock my mifi vodafone r206z

after opening dc-unlocker and entering my user and password (device was loaded with original sim not alien sim), i picked ZTE modems (auto detect was automatically selected) and clicked on the magnifier, i saw a message like installing zte drivers or somthing like that but it didnt detect the device

i unpluged the device and decided to ignore unlocking for now, i connected to mifi again using wireless but modem started to display 0% in battery and status = disconnected
i tried to charge it or plug it directly to electricity more than 6 hours but same message

i did hard rest to the device i managed to connect to vodafone network again with device but still 0% battery and and device flash with battery empty status

i plugged the device again to dc-unlocker and repeated same scenario (with both alien and original sim) and tried to unlock but dc-unlocker say device status unlocked ...

dont know what happened and i cant get device to its original stat, i can hardly with try and error connect to vodafone network and battery alwayes says 0% and align sim dosnt work at all

i lost every thing ..... need some help here


dcunlocker.png

Regards

[Vincentas]

Detect modem by dc-unlocker and use dissable diagnostic port function.

[diemenschmaschine]

Hello, i had exactly the same problem while unlocking my ZTE R206z, and now my device does not charge anymore. Please, help us to fix this issue.

[Valdemaras]

Hello, i had exactly the same problem while unlocking my ZTE R206z, and now my device does not charge anymore. Please, help us to fix this issue.

To solve it please check solution provided by Vincentas.

[diemenschmaschine]

I've tried to follow the solution of Vincentas, but it's not possible because of the lack of charge in the device: the client recognizes the device, I disable the diagnostic port, but I can't select "unlock" because the device is off. Moreover, I can't hard reset the device or restore its firmware, so I'm about to think the device is burnt.

[Valdemaras]

Try to connect device to pc using different usb cable, there is a possibility that it's fault, otherwise might be problem with device hardware.

[diemenschmaschine]

I've tried three different usb cables and still the device doesn't charge. Since the device worked properly before my attempt to unlock it, I think that the client, when it installed the drivers, has tempered the device.

[Valdemaras]

Charging device should not depend on driver installation, as i said most likely it is hardware malfunction.

[diemenschmaschine]

Maybe is like you say, but I think that something happened because of the process of unlocking, it is clear. Now I'm sending the device to the help desk, I hope they will repair it under the warranty coverage

[redpower]

Hello, I had exactly the same problem while unlocking my ZTE R206z. Unlock device and the only led on the device is the battery led on red color and flashing. With dc-unlock program he is recognize as unlock but it can't be use, and probably can't be sent to service because now the device is unlock. I wait a solution for this problem.

[diemenschmaschine]

What suggested by Valdemaras is what they suggested to me 2 month ago: it won't help you, since the device is burnt now and it won't be recognized by the computer anymore. I sent mine to the assistance, and they repaired it, even it was unlocked: I suggest you to focus on the battery problem, they will not notice the unlocking.

[Valdemaras]

Hello, I had exactly the same problem while unlocking my ZTE R206z. Unlock device and the only led on the device is the battery led on red color and flashing. With dc-unlock program he is recognize as unlock but it can't be use, and probably can't be sent to service because now the device is unlock. I wait a solution for this problem.

Solution is to disable diagnostics port after detecting device on DC-unlocker, then reconnect device to pc, it should be back to normal.

[diemenschmaschine]

I think you'd better put a disclaimer about unlocking this device, since it caused the same problem for at least three users. And disabling the disagnostic port is not a solution, since the device cannot be recognized anymore by the computer.

[Valdemaras]

He said that device is detected on dc-unlocker software, therefore it is visible on computer.

[redpower]

Thank You. This solution work for me after I change the computer. Where I unlock the device the disable of diagnostic port has no effect, on other computer after install the software I have a success.
Best regards

[redpower]

I think the unlock of this device is not for ordinary people!