(HELP) How to detect ZTE AC30 when it appears under network adapters

[gajah_gede]

I have ZTE AC30 (unlocked)
the problem come from when i tried to hard reset my modem by pushing 10 times of the power button...after i'm doing the hard reset...only 3 of the leds are beeping the one with 3G isn't....then i try to connect to the pc but the disk contains the setup is not recognize in my laptop. But in my device manager detected 3 of ZTE Driver
ZTE Proprietary USB Modem #2
ZTE Diagnostic Device
ZTE UI AT
and i still can connect the internet using cdma card by setup dial up connnection manually
then i try using dc unlocker client an it says modem could be damaged but its still recognize the port
i try to follow instruction from dc unlocker forum to disable diagnostic device and it works my AC30 recognize as usb media storage so i can install the driver from it
but after that comes another problem my ac30 recognize as network adapter instead of ZTE Proprietary USB Modem #2
Picture below:


I try using dc unlocker to detect my ac30 but my windows always crush
i try to reach 192.168.0.1 and its never show
i try to follow step by step from instruction here

https://www.dc-unlocker.com/how-to-detect-zte-modem-when-it-appears-under-network-adapters

but still can not working

if there anyone can help me with this problem
i've already buy credits to flash my modem...help me please

[Valdemaras]

You must read guide very carefully otherwise it won't work for you. Your devices address maybe not 192.168.0.1 - it is written in the guide that it will be not same, please check your devices manual for correct address.

[gajah_gede]

You must read guide very carefully otherwise it won't work for you. Your devices address maybe not 192.168.0.1 - it is written in the guide that it will be not same, please check your devices manual for correct address.

well i do read all the guide that provide for this problem
i try all the ip provide and there is one ip that respond and asking for user name and password..i insert default user and pass for ZTE AC30 and it doesn"t work..
Honestly i'm getting desperate...i try ipconfig from the windows and it detect that my default gateway 192.168.0.1 and still i can't reach it...

should i connect my ZTE AC30 to my laptop with or without inserting sim card..?? and should i connect the internet with another connection or not?

[Valdemaras]

well i do read all the guide that provide for this problem
i try all the ip provide and there is one ip that respond and asking for user name and password..i insert default user and pass for ZTE AC30 and it doesn"t work..
Honestly i'm getting desperate...i try ipconfig from the windows and it detect that my default gateway 192.168.0.1 and still i can't reach it...

should i connect my ZTE AC30 to my laptop with or without inserting sim card..?? and should i connect the internet with another connection or not?

You can not use ac30 for internet while trying to detect it. If you can't log in with default username/password to device web panel then you need to perform reset to factory defaults. Then default details should work.

[gajah_gede]

You can not use ac30 for internet while trying to detect it. If you can't log in with default username/password to device web panel then you need to perform reset to factory defaults. Then default details should work.

i can't do factory reset by pushing 10 times of power button, i'm doing research from another forum for this problem and can't find anything close enough to solve my problem....if there any link that i can download updater tools for my ZTE AC30 it's allready unlock

or you can help by emailing me step by step so my AC30 could detect as a modem on my laptop...i've try to install ZTE propitieary modem driver manually that i download from dc unlocker support page and still not working..