Zte ac30

[Vincentas]

I am not sure, but I think I have not opened the diagnostic port before unlocking. I set the port numbers for the application and the diagnostics as were shown in the device manager and searched for the device and then unlocked it. I still am not able to connect to the device. When I connect through the USB and try http;?/192.16.0.1 (disconnecting the wifi connection for the netbook), I get the response - 'not connected to internet'. If I remove it from the USB port and power it back, I do not see the device in the list of wifi signals present. I do not have Verizon subscription and I do not have any working SIM with data plan.

Thank You,

Sankara Rao

Sorry, do not know what may be wrong then. Never had such problems.
Try to restart modem with removing battery.

[ksrao801]

Now that u r unlocked download zte end user update tool. Install on your comp
After install connect ac30 via USB cable to comp and run update tool. That should take
Care of that. Let me know how u come out

I have run the update tool. I am able to see the device in the list of wifi signals. I am not able to get in because of password problem. I think they have put a different battery cover (this is a used one). I have to see what the password should be. I am not able to go to 192.168.0.1 via USB still.

Thanks for the help.

[Vincentas]

I have run the update tool. I am able to see the device in the list of wifi signals. I am not able to get in because of password problem. I think they have put a different battery cover (this is a used one). I have to see what the password should be. I am not able to go to 192.168.0.1 via USB still.

Thanks for the help.

Try to reset the device. Try to reach it by other default adresses (not 192.168.0.1 )

[hakan]

Password to log in is admin

[ksrao801]

I finally had a partial success. I did do a factory reset by pressing on/off switch 10 times within a space of 10 sec and used the default password - MEID of the device to connect to it wirelessly. Then I could go to the admin page. I am not able to connect through USB, but I am not really worried very much about it. My thanks to hakan who suggested that I should install zte's verizon firmware.

Thanks again,

Sankara Rao

[hakan]

Glad I could help.

[chert]

Hi. I have AC30, and can not to force DCU to detect it.
I've read all topic closely and find one difference:
windows (xp) detect my ac30 as 'ZTE Wireless Ethernet Adapter'.
So, I can not update firmware also...
Could you please advice, is there some way to unlock my ac30 ?
I've try DCU v687 and the last one.

[ksrao801]

I have used Windows 7 and its device manager and I set the port numbers for the application and the diagnostics as were shown in the device manager and searched for the device and then unlocked it. Try this on XP, it might work

Good Luck