firmware for e1550

[athurupana]

thank you so much. i will reply the result.

[arbnuh]

hi all

i am new to the forums and would appreciate some help unlocking my 3g dongle.I have tried allmost every thing and belwo is the errors i get, if some one understands the errors could some tell me how to fix problem.Many thanks
DC - Unlocker 2 Client 1.00.0347

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E1550
Model : Huawei E1550
IMEI : 353142036540808
Firmware : 11.608.09.01.21
Dashboard version : Huawei_Mixediso_build77_mac_r71_Newdriver
Serial NR. : B54CAA1971223205
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

[Avantha]

hi all

i am new to the forums and would appreciate some help unlocking my 3g dongle.I have tried allmost every thing and belwo is the errors i get, if some one understands the errors could some tell me how to fix problem.Many thanks
DC - Unlocker 2 Client 1.00.0347

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E1550
Model : Huawei E1550
IMEI : 353142036540808
Firmware : 11.608.09.01.21
Dashboard version : Huawei_Mixediso_build77_mac_r71_Newdriver
Serial NR. : B54CAA1971223205
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

Your modem is locked,so what is the error? could you post the error here.

[arbnuh]

hello avanta thank you for replying. I can see that the modem is locked I am trying to unlock it and keep getting msg wrong user name ore password enterd.
Is there unlocking SW that will unlock the modem fro free.
Thanks

[Vincentas]

Username and password you will receive after you buy credits. Credits you can buy here: http://www.dc-unlocker.com/buy

[athurupana]

there is no place to type anything on HyperTerminal please help. yes it works fine with 3G signal. as you tell only problem with 2G signal.

1. connect modem in USB
2. open Hyper Terminal
3. write the name of the new connection. at your discretion
4. on next page choise HUAWEI Mobile Connect - 3G Modem and click Ok
5. on next page click Cancel
6. on Hyper Terminal window write:

AT^SYSCFG=2,2,3fffffff,0,2


and click button ENTER



Now you activate 2G on your modem.
You can close Hyper Terminal

[athurupana]

hei...........

got it done like this. now my modem works fine


1. Start HyperTerminal (Hypertrm.exe).
2. Enter a name for the connection (for example, Test) in the Name box.
3. Click an icon for the connection in the Icon box, and then click OK.
4. In the Connect Using box, click Direct To Com X (where X is the port your modem is connected to) and then click OK.
5. Verify the settings on the Port Settings tab and then click OK.
6. On the File menu, click Properties. On the Settings tab, click ASCII Setup.
7. Click the Send Line Ends With Line Feeds and Echo Typed Characters Locally check boxes to select them.
8. Click OK, and then click OK. You can now type AT commands.
9. Quit HyperTerminal. When you are prompted "Save session <name>?" click Yes if you want to save the session so that you can use AT commands at another time.

thank you sooooooooooooooooo much my all friends.

there is no place to type anything on HyperTerminal please help. yes it works fine with 3G signal. as you tell only problem with 2G signal.

[SANJEEV KHARE]

Unlocker

How does unlocker work in e1550

[Vincentas]

How does unlocker work in e1550

How to use dc-unlocker you can watch here: http://www.dc-unlocker.com/tutorials