I have an E303SS-65 that I wanted to activate voice on. Now aside from the issues on this forum and the fact that Live chat informed me that you can not activate voice on the e303 I have done so without even using this site or tools thereof.
THE E303 DOES SUPPORT VOICE as I read on a Russian forum.
Furthermore the "advice" offered on the chat of this forum was also inaccurate in that the driver required for the firmware update mode in Windows will NEVER install unless you edit an inf file and add the USB ID of the modem when in firmware upgrade mode.
here is how
Use
Go to http://192.168.1.1/html/switchProjectMode.html (this will make the USB Serial Ports avialable to use AT commands
followed by AT commands to put modem in serial mode
Edit the file ewser2k.inf (mine on 64 bit system was at C:\Program Files (x86)\Mobile Partner\Driver\Driver\X64
and in the [QcomSerialPort] (32bit) or [QcomSerialPort.NTamd64] (64 bit) add the following lines
Now the next time the modem is switched to download mode, go to device manager and see if the serial port driver installed or if modem show as unknown device Manually direct windows to the location of inf file edited earlier.
Modem will now be ready for flash
DC unlocker please refund my payment.
Your own software below shows that yes the modem can be activated for voice, and this was done without yoyur advice that did not work and without your tools and despite that you claim you can not activate voice on this modem.
DC-Unlocker-Proof.jpg
THE E303 DOES SUPPORT VOICE as I read on a Russian forum.
Furthermore the "advice" offered on the chat of this forum was also inaccurate in that the driver required for the firmware update mode in Windows will NEVER install unless you edit an inf file and add the USB ID of the modem when in firmware upgrade mode.
here is how
Use
Go to http://192.168.1.1/html/switchProjectMode.html (this will make the USB Serial Ports avialable to use AT commands
followed by AT commands to put modem in serial mode
Edit the file ewser2k.inf (mine on 64 bit system was at C:\Program Files (x86)\Mobile Partner\Driver\Driver\X64
and in the [QcomSerialPort] (32bit) or [QcomSerialPort.NTamd64] (64 bit) add the following lines
Code:
%QcomDevice01% = QportInstall01, USB\VID_12d1&PID_1442&MI_00 %QcomDevice00% = QportInstall00, USB\VID_12d1&PID_1442&MI_01
Now the next time the modem is switched to download mode, go to device manager and see if the serial port driver installed or if modem show as unknown device Manually direct windows to the location of inf file edited earlier.
Modem will now be ready for flash
DC unlocker please refund my payment.
Your own software below shows that yes the modem can be activated for voice, and this was done without yoyur advice that did not work and without your tools and despite that you claim you can not activate voice on this modem.
DC-Unlocker-Proof.jpg
Comment