Free HUAWEI voice functions activation (beta) ONLY here

[badre2911]

How's it guys.
I've upgraded my E160's firmware and also installed the new mobile partner which was posted somewhere in the earlier posts

My modem is detected, cd, sd function detected and mobile partner shows me the call option..i can call out but i can not hear anything.
What do i have to do next so i can talk and listen to the call?
much appreciated for this awesome effort to get the voice function active.
cheers
Comodore

active voice with dc-unloker 413 beta

[Comodore160]

E160 no sound during calls

How's it guys.
I've upgraded my E160's firmware and also installed the new mobile partner which was posted somewhere in the earlier posts

My modem is detected, cd, sd function detected and mobile partner shows me the call option..i can call out but i can not hear anything.
What do i have to do next so i can talk and listen to the call?
much appreciated for this awesome effort to get the voice function active.
cheers
Comodore

[badre2911]

This are the steps that I do for Huawei Vodafone K3565 modem-dongle:

1) UNLOCK MODEM

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : 9.3.5.11690
Serial NR. : DX7NAA1920......
SIM Lock status : locked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

AFTER UNLOCK:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : 9.3.5.11690
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

2) CHANGE INTERNAL DASHBOARD

AFTER CHANGED by Panatar:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

3) UPGRADE FIRMWARE with Voice VERSION

AFTER Upgrade (note: no password required):

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.608.08.81.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

4) ACTIVATE VOICE FUNCTION

AFTER Activation:

Activating voice for Huawei datacards Huawei E160/E160G/E160X ...

Voice successfully activated !

Please safe remove modem !

5) RESUME Micro-SD Memory

With AT Command:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.608.08.81.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)

===============================================
AT^U2DIAG=276

^BOOT:24271684,0,0,0,77
OK

Now, if Dc-Unlocker or other software have problem to detect modem-dongle, goto device-manager (modem in last step, is always connected to usb) under USB controller device identifies and remove USB mass storage device. After click on "scan for hardware changes" to help windows to recognize again modem dongle.
All done!!!

i have E160 update.zip but where can i download dashnoard in zip file ?

Thanks in advance

[Fakiro]

StepByStep> UNLOCK, CHANGE DASHB., UPGRADE FIRMW., ACTIVATE VOICE on VODAFONE K3565

This are the steps that I do for Huawei Vodafone K3565 modem-dongle:

1) UNLOCK MODEM

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : 9.3.5.11690
Serial NR. : DX7NAA1920......
SIM Lock status : locked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

AFTER UNLOCK:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : 9.3.5.11690
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

2) CHANGE INTERNAL DASHBOARD

AFTER CHANGED by Panatar:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.604.20.01.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

3) UPGRADE FIRMWARE with Voice VERSION

AFTER Upgrade (note: no password required):

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.608.08.81.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

4) ACTIVATE VOICE FUNCTION

AFTER Activation:

Activating voice for Huawei datacards Huawei E160/E160G/E160X ...

Voice successfully activated !

Please safe remove modem !

5) RESUME Micro-SD Memory

With AT Command:

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855024......
Firmware : 11.608.08.81.00
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DX7NAA1920......
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)

===============================================
AT^U2DIAG=276

^BOOT:24271684,0,0,0,77
OK

Now, if Dc-Unlocker or other software have problem to detect modem-dongle, goto device-manager (modem in last step, is always connected to usb) under USB controller device identifies and remove USB mass storage device. After click on "scan for hardware changes" to help windows to recognize again modem dongle.
All done!!!

[badre2911]

Hi,

got an E160X und DC-Unlocker says Firmware too old.
When I want to update to new firmware it asks for password.
Can you help me with password please?

Please see DC-Unlocker information below:
================================================== =
DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855020508097
Firmware : 11.604.21.00.156
Dashboard version : UTPS11.030.01.04.03
Serial NR. : DX7NAA18A2705886
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

================================================== =

Thank you!

generate password firmware with dc-unlocker and enter the numbrer that dc-unlocker say.

[fortix]

Firmware Upgrade - Passwort needed

Hi,

got an E160X und DC-Unlocker says Firmware too old.
When I want to update to new firmware it asks for password.
Can you help me with password please?

Please see DC-Unlocker information below:
================================================== =
DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 355855020508097
Firmware : 11.604.21.00.156
Dashboard version : UTPS11.030.01.04.03
Serial NR. : DX7NAA18A2705886
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)

================================================== =

Thank you!

[badre2911]

hi,

when i attempt to update my E160 with E160Update_11.608.08.81.00.B409.zip , i enter a password generate with dc-unlocker and at end i have this error

the wireless terminal inserted is not E160, update wizard can't work on.

my key is an E160

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X

What its the problem ?



thanks in advance.

My update as failed and now i have a dashboard version 1, but my E160 is ok with mobile partner and dc-unlocker

Firmware : 11.604.21.05.314
Dashboard version : 1 <============ version ?
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)


Thanks.

[badre2911]

update failed

hi,

when i attempt to update my E160 with E160Update_11.608.08.81.00.B409.zip , i enter a password generate with dc-unlocker and at end i have this error

the wireless terminal inserted is not E160, update wizard can't work on.

my key is an E160

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X

What its the problem ?



thanks in advance.

[waruna]

Firmware version seem that is ok, have voice feature inside...
Try to load any newest

From where I can get a new firmware version for E169G?

[Fakiro]

Yes, I use panatar dashboard.
Hardware version: CD57TCPU
Firmware version: 11.314.13.51.156
Software Version: 11.302.09.01.539

Firmware version seem that is ok, have voice feature inside...
Try to load any newest

[waruna]

The SIM is ok. Can make calls on my mobile.
I tried with 2 SIMs.

[waruna]

Yes, I use panatar dashboard.
Hardware version: CD57TCPU
Firmware version: 11.314.13.51.156
Software Version: 11.302.09.01.539

[panatar]

Thanks for the information.
My E169G got voice function already activated. But I can not make calls using Huawei Mobile Partner 11.302.09.01.539.
Always get the "Failed to make the call" message.

Error log:
\Mobile Partner\Log\ATtrace_0.txt
2010-01-31 14:41:02:620 ERROR \new090511\Unicomm\src\atcomm\Call.cpp (line 100) DialOut false!

What should be the version of "Mobile Partner" to use with E169G to make calls?

Try to insert sim card you use in modem into the handy and try to make a call. Maybe voice calls are disabled on this sim card?

[Fakiro]

Thanks for the information.
My E169G got voice function already activated. But I can not make calls using Huawei Mobile Partner 11.302.09.01.539.
Always get the "Failed to make the call" message.

Error log:
\Mobile Partner\Log\ATtrace_0.txt
2010-01-31 14:41:02:620 ERROR \new090511\Unicomm\src\atcomm\Call.cpp (line 100) DialOut false!

What should be the version of "Mobile Partner" to use with E169G to make calls?

Dashboard you use is right (panatar?) ...need to know your firmware version

[waruna]

E169G have slot micro-SD memory, and external antenna connector (as E169) but they are hidden from the plastic shell

Thanks for the information.
My E169G got voice function already activated. But I can not make calls using Huawei Mobile Partner 11.302.09.01.539.
Always get the "Failed to make the call" message.

Error log:
\Mobile Partner\Log\ATtrace_0.txt
2010-01-31 14:41:02:620 ERROR \new090511\Unicomm\src\atcomm\Call.cpp (line 100) DialOut false!

What should be the version of "Mobile Partner" to use with E169G to make calls?