Free HUAWEI voice functions activation (beta) ONLY here

[sirrich]

i already updated my firmware to this E160Update_11.608.08.81.00.B409 and my dashboard has voice feature too im using E160, im using now my dongle for internet and surfing meaning its connected to a network and i try to run the dc-unlocker but it cant read my usb modem..... any help pls ??

[panatar]

Excellent, thank you very much. It looks like the E1550 is smart enough to realize that it lacks a sound output port ...

No - its due to voice activation improvement since version 411 beta.

[femtodude]

Excellent, thank you very much. It looks like the E1550 is smart enough to realize that it lacks a sound output port ...

[panatar]

I tried this on an unlocked (by DC-unlocker, thanks guys ) E1550 and got

AT^CVOICE?
^RSSI:18
^CVOICE:0,8000,16,20
OK

AT^CVOICE?
^CVOICE:0,8000,16,20
OK


Does this look OK? If not, is there a way to redirect audio to PC Voice mode?

Yes its perfect - it means that voice is redirected to PC.

[femtodude]

Arunas try to enable voice and send AT^CVOICE? to modem. it returns 0 - which is correct - its PC Voice Mode. Now send AT^U2DIAG=255 command and reinsert modem. Send AT^CVOICE? and it will return 1 which means Earphone Mode. Not good - after AT^U2DIAG=255 it restores factory defaults from nvram.

I tried this on an unlocked (by DC-unlocker, thanks guys ) E1550 and got

AT^CVOICE?
^RSSI:18
^CVOICE:0,8000,16,20
OK

Same result after AT^U2DIAG=276:

Found modem : E1550
Model : Huawei E1550
IMEI :
Firmware : 11.608.10.00.00
Dashboard version : UTPS11.300.05.08.56_MAC11.300.08.13.56
Serial NR. :
SIM Lock status : unlocked
Voice feature : enabled

AT^CVOICE?
^CVOICE:0,8000,16,20
OK


Does this look OK? If not, is there a way to redirect audio to PC Voice mode?

[panatar]

Bug was found in the dashboard that causes uninstallation request every time the modem was plugged into usb port. New version of dashboard uploaded - please redownload from http://panatar.com/mobile_partner_voice_ussd.zip, reflash, reinstall and check.

Thanks labko for informing.

[tonyh1601]

Voice Activated

Hello my k3520 is activated for voice does anyone know how to get free calls and what you've got to do? thanks

[panatar]

i have reset factory default, then the modem is not detected and in dc-unlocker i have card not found, then i have installed driver and dc-unlocked detect the card

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 353762038782940
Firmware : 11.604.21.05.314
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

thanks in advance.

Ok - you don't need to update firmware - just activate voice and you'll be fine. Send AT^U2DIAG=276 after that.

[badre2911]

Send AT^U2DIAG=255 - factory defaults.

Detect modem with dc-unlocker and post its output here.

i have reset factory default, then the modem is not detected and in dc-unlocker i have card not found, then i have installed driver and dc-unlocked detect the card

DC - Unlocker 2 Client 1.00.0413 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 353762038782940
Firmware : 11.604.21.05.314
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

thanks in advance.

[panatar]

i have tested reseting default and is a same.

is possible to reinitialize completly the key ?

any idea ?

Thanks in advance.

Send AT^U2DIAG=255 - factory defaults.

Detect modem with dc-unlocker and post its output here.

[badre2911]

i havre tried many times and is a same.

may be i must to reset default the key ?

what you think ?

Thanks.

i have tested reseting default and is a same.

is possible to reinitialize completly the key ?

any idea ?

Thanks in advance.

[badre2911]

I see. Just try to flash again.

i havre tried many times and is a same.

may be i must to reset default the key ?

what you think ?

Thanks.

[Comodore160]

More questions

Does the E220 support the voice function?
also how do i find the password for an already unlocked E160 so i can upgrade firmware and dashboard?
How does the ussd work? how do i use it?
Cheers
Comodore

[panatar]

i have do the actions below:

updating dashboard => is ok ( i have removed and inserted again the key)

i don't see cdrom for launch mobile partner, i have type the command in dc-unlocker AT^U2DIAG=276 => now i see cdrom and sd card memory => is ok

i have installed mobile partner voice from my key E160 => is ok

i have upgraded firmware E160Update_11.608.08.81.00.B409, i have enter a password firmware generated from dc-unlocker, => is not ok
i have a message box below

the wireless terminal inserted is not E160, update wizard can't work on.

where is a problem, why the update say me that is not E160 ?

i have tested with tree other firmware and i have a same message

Thanks in advance.

I see. Just try to flash again.

[badre2911]

http://panatar.com/mobile_partner_voice_ussd.zip - its dashboard reflash. Well do you run it? It will reflash your modem dashboard. After that you need to enable autorun on your disks in Windows. Remove your modem from usb. Uninstall your current Mobile Partner comletely. Insert modem - new Mobile Partner will be installed.

i have do the actions below:

updating dashboard => is ok ( i have removed and inserted again the key)

i don't see cdrom for launch mobile partner, i have type the command in dc-unlocker AT^U2DIAG=276 => now i see cdrom and sd card memory => is ok

i have installed mobile partner voice from my key E160 => is ok

i have upgraded firmware E160Update_11.608.08.81.00.B409, i have enter a password firmware generated from dc-unlocker, => is not ok
i have a message box below

the wireless terminal inserted is not E160, update wizard can't work on.

where is a problem, why the update say me that is not E160 ?

i have tested with tree other firmware and i have a same message

Thanks in advance.