Free HUAWEI voice functions activation (beta) ONLY here

[bioneo]

sorry i use putty and terraterminal and dosen have any response from de modem

i hope that response like this

terminal session:
AT

I HAVE NO RESPONSE OF ANY COMMAND

i just connect OK to the COM4 port with out problems but when i try to sen d command i dont have any response of OK or ERROR

[SatAddict]

I have updated E160G's firmware (thanks to panatar)and enabled voice! Everything is work fine. You guys rocks!

DC - Unlocker 2 Client 1.00.0411 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160G
Model : Huawei E160/E160G/E160X
IMEI : 35
Firmware : 11.608.08.81.00
Dashboard version : UTPS11.300.05.00.03_MAC11.202.08.00.03
Serial NR. : DL9RAA18B2804360
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)

[panatar]

Try please other provider sim, also be sure signal strength is not to low.

Arunas try to enable voice and send AT^CVOICE? to modem. it returns 0 - which is correct - its PC Voice Mode. Now send AT^U2DIAG=255 command and reinsert modem. Send AT^CVOICE? and it will return 1 which means Earphone Mode. Not good - after AT^U2DIAG=255 it restores factory defaults from nvram.

[Arunas]

i have rebooted my netbook and now is ok, the voice is enbaled but calling don't work.

i have selected gsm and call a number but the number is callling and closed rapidly.

Thanks in advance.

Try please other provider sim, also be sure signal strength is not to low.

[badre2911]

i have rebooted my netbook and now is ok, the voice is enbaled but calling don't work.

i have selected gsm and call a number but the number is callling and closed rapidly.

Thanks in advance.

[panatar]

Good news

Its not at all. After AT^U2DIAG=255 the voice feature stays activated, but voice output changes from PC OUTPUT to MODEM LINEAR OUTPUT (this is incorrect, because this modem doesn't posess one). Even the Mobile partner calls numbers, you'll not hear anything. Before AT^U2DIAG=255 everything is ok except CD-ROM and memory card absence.

[Arunas]

LOL, Ive tried it out on a E1550, so I enabled voice, then I sent AT^U2DIAG=276, then CD Drive came back but voice is still there in DC Unlocker!!

Good news

[yaylol]

LOL, Ive tried it out on a E1550, so I enabled voice, then I sent AT^U2DIAG=276, then CD Drive came back but voice is still there in DC Unlocker!!

[Arunas]

dosent work the reset at commands

AT^U2DIAG=256 or AT^U2DIAG=276 or AT^U2DIAG=255

ant modem E156B

anyone know any idea?

this commands is send via USSD from mobile partner

Please use windows hyper terminal to send at commands.
How use hyper terminal you can find in google.
Later we implement at commands sending feature to dc unlocker.

[Arunas]

i have huawei E160

Haw can i enable voice ?
i have push button activate voice, dc unlocker say voice enabled but when i launch again dc unlocker, it say voice disabled

what is wrong ?

i have entered my user and password and put your user and password but the voice is always disable.

Thanks in advance.

After activating need reinsert modem, have you do it ?

[badre2911]

Activate voice

i have huawei E160

i have installed dc unloker is ok
i have installed mobile partner version voice is ok

Detecting card :

selection :
manufacturer - Huawei datacards
model - Huawei E160/E160G/E160X
application port - COM13
diagnostic port - COM15

Found modem : E160X
Model : Huawei E160/E160G/E160X
IMEI : 3***********
Firmware : 11.604.21.05.314
Dashboard version : UTPS11.031.02.01.03
Serial NR. : DY5TAA19A0802569
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

Haw can i enable voice ?
i have push button activate voice, dc unlocker say voice enabled but when i launch again dc unlocker, it say voice disabled

what is wrong ?

i have entered my user and password and put your user and password but the voice is always disable.

Thanks in advance.

[bioneo]

dosent work the reset at commands

AT^U2DIAG=256 or AT^U2DIAG=276 or AT^U2DIAG=255

ant modem E156B

anyone know any idea?

this commands is send via USSD from mobile partner

[yaylol]

Found modem : E1550
Model : Huawei E1550
IMEI :
Firmware : 11.608.12.04.21
Dashboard version : UTPS11.302.09.00.03_MAC11.301.10.00.03
Serial NR. : B54CAA19B0854981
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

[SatAddict]

DC - Unlocker 2 Client 1.00.0411 beta

Detecting card :

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E160G
Model : Huawei E160/E160G/E160X
IMEI : 35
Firmware : 11.604.21.00.156
Dashboard version : UTPS11.300.05.00.03_MAC11.202.08.00.03
Serial NR. : DL9RAA18B2804360
SIM Lock status : unlocked
Voice feature : not supported in current firmware
Wrong codes entered : 0 (unlock attempts left : 10)


Firmware update is required

[bioneo]

selection :
manufacturer - Huawei datacards
model - Auto detect

Found modem : E156B
Model : Huawei E156/E156G
IMEI : 3*************
Firmware : 11.608.08.00.237
Dashboard version : UTPS11.300.05.00.03_MAC11.202.08.00.03
Serial NR. : GK7NAA1922704494
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)

no SD memory and virtual cd is fuctunaly

thanks!